Square Premium Cordierite Ceramic Post - Unit is a 1-1/2" Sided Hollow Square x 6" High

Side brick for Easy-Fire e14S-3 and Fuego F1418. 3" Brick with Element Channels. The Unit includes one 3" Brick with a four 2.5" element channels and two 1" element channels

Side brick for Easy-Fire e14S-3 and Fuego F1418. 3" Brick with no Element Channels. The Unit includes one 3" Brick.

Side brick for Easy-Fire e14S-3 and Fuego F1418 with Quad elements. 3" Brick with Element Channels. The Unit includes one 3" Brick with a full line of Element Channels (Four 3" Channels)

Side brick for Easy-Fire Quad e14S-3 and Fuego F1418. 3" Brick with Element Channels. The Unit includes one 3" Brick with four 2.5" element channels and two 1" element channels

Side brick for Easy-Fire e14S-3 and Fuego F1418. 3" Brick with no Element Channels. The Unit includes one 3" Brick

Side brick for Easy-Fire e14S-3 and Fuego F1418. 3" Brick with Element Channels for element connection. The Unit includes one 3" Brick with a full line of Element Channels (Two 2.5" channels and one 1" channel)

Side brick for Easy-Fire e14S-3 and Fuego F1418. 3" Brick with Element Channels. The Unit includes one 3" Brick with a full line of Element Channels (Two 3" Channels)

Element Connection Sidebrick for All Easy-Fire e18S-3, e-18M-3, e18T-3 and Jupiter J18-3, J18X-3, JD18-3, JD18X-3 kilns, and older Liberty-Belle kilns with 3" brick. 3" Brick with Element Holders - Unit includes one 3" Brick with a full line of Element Holders (Two 2-1/2" Holders, and One 1" Element Holder) 

Sidebrick for Quad e18S, e18T, J18, JD18, J18X, JD18X and Liberty-Belle 2-1/2" Brick Kilns without Element Holders - Unit includes one 2-1/2" Brick with a two rows of element grooves for the separate element holders.

Element Connection Sidebrick for Easy-Fire e18S, e18T, Jupiter J18, J18X, JD18, and JD18X, and Liberty-Belle LB18 Kilns. 2-1/2" Brick with Element Channels for the side where the elements connect. Unit includes one 2-1/2" Brick with a full line of Element Channels (Two 2-1/2" Holders and One 1" holder) 

Side brick for Easy-Fire e18S & e18T, J18, J18X, JD18, JD18X, and Liberty-Belle LB18 Kilns. 2-1/2" Brick without Element Channels- The unit includes one 2-1/2" Brick with one groove but no Element Channels

Side brick for Easy-Fire e18S, e18T, Jupiter J18, J18X, JD18, and JD18X, and Liberty-Belle LB18 Kilns. 2-1/2" Brick with Element Channels- Unit includes one 2-1/2" Brick with a full line of Element Channels (One 3" & One 3-15/16" Channels)

Side brick for Quad e18S-3, e18T-3, J18-3, JD18-3, J18X-3, JD18X-3, and LB18-3 Kilns with 3" thick brick, Brick without Element Channels- Unit includes one 3" Brick with two rows of element grooves for the separate element Channels.

Side brick for all Easy-Fire e18S-3 & e18T-3 and Jupiter J18-3, JD18X-3, J18-3, J18X-3 and Liberty-Belle LB18-3 kiln. 3" Brick Kilns without Element Channels- The unit includes one 3" Brick with one groove but no Element Channels

Side brick for Easy-Fire e18S-3 & e18T-3, and Liberty-Belle LB18-3 Kilns. 3" Brick with Element Holders - Unit includes one 3" Brick with a full line of Element Holders (One 2.5" & One 4.25" Holder)

Side brick for Quad e18S, e18T, JD18, and JD18X 2-1/2" Brick Kilns with Element Channels. For the element connection side. Unit includes one 2-1/2" Brick with two rows of element grooves with five Element Channels (one 3" Channel, one 3.5" Channel, two 2.5" Channels, and one 1" Channel)

Side brick for Quad e18S, e18T, JD18, and JD18X 2-1/2" Brick Kilns with Element Channels. Unit includes one 2-1/2" Brick with two rows of element grooves with four Element Channels (four 2.5" and two 1" Channels). This is made for the side brick where the element drop downs and returns to the bottom row of channels.

Side brick for Quad e18S, e18T, J18, JD18, J18X, JD18X and Liberty-Belle LB18. 2-1/2" Brick Kilns with Element Channels - Unit includes one 2-1/2" Brick with two rows of element grooves with four Element Channels (Two 3" & Two 3-15/16" Holder)

Side brick for Quad e18S-3, e18T-3, J18-3, and JD18-3 3" Brick Kilns with Element Channels.  Unit includes one 3" Brick with two rows of element grooves with five Element Channels (one 3" Channel, one 3.5" Channel, two 2.5" Channels, and one 1" Channel)

Side brick for Quad e18S-3, e18M-3, e18T-3, JD18-3, and JD18X-3 3" Brick Kilns with Element Channels. Unit includes one 3" Brick with two rows of element grooves with four Element Channels (four 2.5" and two 1" Channels). This is made for the side brick where the element drop downs and returns to the bottom row of channels.

Side brick for Quad e18S-3, e18T-3, J18-3, JD18-3, J18X-3, JD18X-3, and LB18-3. 3" Brick Kilns with Element Channels- The unit includes one 3" Brick with two rows of element grooves with four Element Channels(Two 2.5" & Two 4.25" Holders)

Square Premium Cordierite Ceramic Post - Unit is a 1-1/2" Sided Hollow Square x 8" High

Corrosion Resistant Aluminized Steel Stand Legs with PEM Nuts attached - Unit is used with All newer style Stand Tops in use since 2001

Bottom Firebrick Slab for All Easy-Fire e23S & e23T Kilns, All SM23T Kilns, All Dura-Fire D23S & D23T Kilns, and All Jupiter and Econo JD2300, J2300, & K2300 Series Kilns - Unit includes a cemented 2-1/2" Brick Slab wrapped in the Stainless Steel Band. 

Bottom Firebrick Slab for All Easy-Fire e23S-3 & e23T-3 Kilns, All SM23T-3 Kilns, All Dura-Fire D23S-3 & D23T-3 Kilns, and All Jupiter JD2300-3 & J2300-3 Series Kilns - Unit includes a cemented 3" Brick Slab wrapped in the Stainless Steel Band

Bottom Firebrick Slab for All Jupiter and Econo JD2900 & J2900 Series Kilns - Unit includes a cemented 2-1/2" Brick Slab wrapped in the Stainless Steel Band

Bottom Firebrick Slab for All Easy-Fire e28S-3 & e28T-3 Kilns, All SM28T-3 Kilns, All Dura-Fire D28S-3 & D28T-3 Kilns, eQuad-Pro eQ2827-3, eQ2836-3, and All Jupiter JD2900-3 & J2900-3 Series Kilns - Unit includes a cemented 3" Brick Slab wrapped in the Stainless Steel Band. 

Brick bottom, 3" thick, for e14S-3 and Fuego

Bottom Firebrick Slab for e14-3 Kilns - Unit includes a cemented 3" Brick Slab wrapped in the Stainless Steel Band

Bottom Firebrick Slab for All Easy-Fire e18S & e18T Kilns, All Liberty-Belle LB18 Kilns, All Dura-Fire D18S & D18T Kilns, and All Jupiter and Econo JD1800, J1800, & K1800 Series Kilns - Unit includes a cemented 2-1/2" Brick Slab wrapped in the Stainless Steel Band. 

Bottom Firebrick Slab for All Easy-Fire e18S-3 & e18T-3 Kilns, All Liberty-Belle LB18-3 Kilns, All Dura-Fire D18S-3 & D18T-3 Kilns, and All Jupiter JD1800-3 & J1800-3 Series Kilns - Unit includes a cemented 3" Brick Slab wrapped in the Stainless Steel Band

One gallon of K23 firebrick dust for use in repair purposes. Comes in four plastic quart jars.

One quart of K23 firebrick dust for use in repair purposes. Comes in a plastic jar with a screw-on lid.

One half pint of K23 firebrick dust for use in repair purposes. Comes in a plastic jar with a screw-on lid.

When you need to convert your kiln from Type K to Type S thermocouples, this plug is cemented into the larger hole we use for our Type K thermocouples with protection tubes.

• Video tutorial 

Includes the following

½ pint Primer Mix
½ pint Brick Dust
½ pint Brick Facing
½ pint Brick Cement
1 brick
Small Plastic Spatula
Small brush
1 rubber glove
1 small sponge

Instructions

This is used to prevent element ends from touching each other (on older kilns). A 21/64" diameter hole is drilled into the brick 1-1/4" deep and the assembly is inserted into the hole. The overall length is 2" and the thick end is about 3/4" long.

Ceramic Element Terminal Block for M Series (middle section) Easy-Fire Kiln Sections. Was used on e18M, e18M-3, e23M, e23M-3, e28M-3 middle kiln sections that are 4.5" high.

(NO LONGER USED ON NEW KILNS AS OF APPROXIMATELY Feb 1, 2025) - newer kilns need this block. Check your kiln before ordering. 

The unit includes the terminal screws, nuts, and stainless flat washers. Lock washers are no longer needed.

You may also need two mounting screws.

See this link for wiring help (diagrams at the bottom of page)

This older version of our Ceramic Element Terminal Block has been discontinued and directly replaced with two of these NEW BLOCKS for every one of the old block.

If your old block has 3 bolts (series configuration, as pictured) then you need to order one of these jumper wires as well. 

You will also need 4 of these screws (2 per NEW BLOCK). 

Reference the diagrams at the bottom of this page for wiring your new blocks based on whether you have parallel or series elements.

This older version of our Ceramic Element Terminal Block has been discontinued and directly replaced with two of these NEW BLOCKS for every one of the old block.

If your old block has 2 bolts (parallel configuration, as pictured) then you need to order two of these jumper wires as well. 

You will also need 4 of these screws (2 per NEW BLOCK). 

Reference the diagrams at the bottom of this page for wiring your new blocks based on whether you have parallel or series elements.

Zinc Plated Chest Handle - Unit is 3-1/2" Wide, includes Mounting Hardware and is used on All Easy-Fire Kiln, eQuad-Pro Kiln, School-Master Kiln, DaVinci Kiln, and Dura-Fire Kiln Sections

Clamp to hold on 50 Amp Power Cord. This clamp hold the power cord in place where the cord comes out of the control panel.

Corrosion Resistant Aluminized Steel Stand & Legs for use with All 10-Sided Kilns - The unit is constructed from 14 ga. steel and comes with four Legs with PEM Nuts, Hardware for assembly, and pre-installed Hole and Mounting Studs for a vent system. The stand is 21.9" square and sits 8" off the ground.

Corrosion Resistant Aluminized Steel Stand & Legs for use with All 12-Sided Kilns - The unit is constructed from 14 ga. steel and comes with four Legs with PEM Nuts, Hardware for assembly, and pre-installed Hole and Mounting Studs for a vent system. The stand is 25.7" square and sits 8" off the ground.

Corrosion Resistant Aluminized Steel Stand & Legs for use with 7-Sided kilns (like the e14S-3) - The unit is constructed from 14 ga. steel comes with four Legs with PEM Nuts, Hardware for assembly, and pre-installed Hole and Mounting Studs for a vent system. The stand is 15.65" square and sits 8" off the ground.

Corrosion Resistant Aluminized Steel Stand & Legs for use with 8-Sided kilns (like the e18S-3)  - The unit is constructed from 14 ga. steel comes with four Legs with PEM Nuts, Hardware for assembly, and pre-installed Hole and Mounting Studs for a vent system. The stand is 17.8" square and sits 8" off the ground.

Complete 2nd Generation Spring-Assisted Easy-Lift Hinge for 10-Sided Kilns - Assembly includes all 2nd generation Easy-Lift Hinge components: hinge body and lid metal, mounting hardware, springs, bars. Can be used on all 10-Sided Kilns with two or more sections.

This stainless steel hinge assembly can be used to replace the older 1st generation aluminized steel hinge assemblies. You need to replace the entire assembly. See this video for how to replace the hinge assembly.

See how to install the Spring Hinge

See how to adjust the Spring Hinge

See how to adjust spring tension on the Spring Hinge

Complete 2nd Generation Spring-Assisted Easy-Lift Hinge for 12-Sided Kilns - Assembly includes all 2nd generation Easy-Lift Hinge components: hinge body and lid metal, mounting hardware, springs, bars. Can be used on all 12-Sided Kilns with two or more sections.

This stainless steel hinge assembly can be used to replace the older 1st generation aluminized steel hinge assemblies. You need to replace the entire assembly. See this video for how to replace the hinge assembly.

See how to install the Spring Hinge

See how to adjust the Spring Hinge

See how to adjust spring tension on the Spring Hinge