SHOP KILN PARTS

H-J-1200/00
$57.00

Full Round Premium Cordierite Ceramic Shelf - Unit is a Full Circle 12" in Diameter and 1/2" Thick. These are used on Fuego kilns.

H-J-150A/00
$72.00

Full Round Premium Cordierite Ceramic Shelf - Unit is a Full Circle 15" in Diameter and 5/8" Thick

H-J-155A/00
$48.00

Half Round Premium Cordierite Ceramic Shelf - Unit is a Half Circle 15" in Diameter and 5/8" Thick

H-J-2050/00
$62.00

Half Round Premium Cordierite Ceramic Shelf - Unit is a Half Circle 20" in Diameter and 3/4" Thick.

H-J-2650/00
$92.00

Half Round Premium Cordierite Hollow Core Ceramic Shelf - Half Circle 25-1/2" in Diameter and 5/8" Thick.

Hollow core shelves match the strength of standard cordierite shelves while being only a fraction of the weight.

H-D-9000/00
$44.00

Full Round Premium Cordierite Ceramic Shelf - Unit is a Full Circle 9" in Diameter and 3/8" Thick

L-G-INSU/ED
$8.55

This is used to prevent element ends from touching each other (on older kilns). A 21/64" diameter hole is drilled into the brick 1-1/4" deep and the assembly is inserted into the hole. The overall length is 2" and the thick end is about 3/4" long.

L-G-MTRM/00
$53.00

Ceramic Element Terminal Block for M Series (middle section) Easy-Fire Kiln Sections. Was used on e18M, e18M-3, e23M, e23M-3, e28M-3 middle kiln sections that are 4.5" high.

(NO LONGER USED ON NEW KILNS AS OF APPROXIMATELY Feb 1, 2025) - newer kilns need this block. Check your kiln before ordering. 

The unit includes the terminal screws, nuts, and stainless flat washers. Lock washers are no longer needed.

You may also need two mounting screws.

See this link for wiring help (diagrams at the bottom of page)

C-G-SPKT/DL
$46.00

Kit includes four each of 1/2", 1", 2", & 4" high 1-1/2" Square Ceramic Posts

S-G-HNDL/00
$39.00

Ceramic Handle for 2nd Generation Easy-Lift Hinges - The unit is 1" in Diameter, 7-15/16" in Length, and Includes Mounting Hardware

Acorn Nuts: M-A-ACRN/00 - (two included)
Threaded Rod: M-A-TROD/00 - (one included)

L-G-INSM/00
$5.20

Element Insulator Bushing - Unit is used in conjunction with the Old Style (Red) Element Terminal Boards to keep the Element insulated from the Sheet Metal Casing

H-D-KDHL/00
$134.00
Two 9" Full Round Shelves (3/8" thick) and Kit includes four each of 1/2", 1", 2", & 4" high 1-1/2" Square Ceramic Posts
H-E-K14S/00
$247.00
Three 12" Full Round Shelves (1/2" thick), Four each of 1/2", 1", 2", 4", & 6" high 1-1/2" Square Ceramic Posts, and One Pair Heat Resistant Gloves
H-E-K18T/30
$515.00
Two 15" Full Round Shelves and Four 15" Half Round Shelves (5/8" thick), Six each of 1/2", 1", 2", 4", 6", & 8" high 1-1/2" Square Ceramic Posts, and One Pair Heat Resistant Gloves
H-J-1626/KT
$550.00
Three 14" x 24" Rectangular Shelves (3/4" thick), Six Each 1/2", 1", 2", 4", 6", and 8" Square Posts, and One Pair Heat Resistant Gloves
H-J-2626/KT
$780.00
Six 12" x 24" Rectangular Shelves (3/4" thick), Six Each 1/2", 1", 2", 4", 6", and 8" Square Posts, and One Pair Heat Resistant Gloves
H-J-2635/KT
$985.00
Eight 12" x 24" Rectangular Shelves (3/4" thick), Six Each 1/2", 1", 2", 4", 6", and 8" Square Posts, and One Pair Heat Resistant Gloves
H-B-2424/00
$580.00

Lead Time: 1 to 2 weeks

Four 11" x 22" Rectangular Shelves (3/4" thick), Six Each 1/2", 1", 2", 4", 6", and 8" Square Posts, and One Pair Heat Resistant Gloves
H-B-2427/00
$780.00
Six 11" x 22" Rectangular Shelves (3/4" thick), Six Each 1/2", 1", 2", 4", 6", and 8" Square Posts, and One Pair Heat Resistant Gloves
H-B-2436/00
$985.00
Eight 11" x 22" Rectangular Shelves (3/4" thick), Twelve Each 1/2", 1", 2", 4", 6", and 8" Square Posts, and One Pair Heat Resistant Gloves