In this video, we demonstrate how to change a single-phase kiln into a three-phase L&L Easy-Fire or School-Master kiln. 

Although this video is specific to these kiln series, the basic principle applies to most 280 and 240-volt kilns. Kilns with higher amperage will not have the cord, but all 208 and 240-volt kilns can do the same easy change at the terminal block. 

The hard ceramic element channels that L&L uses are very hard to break - unlike the typical grooved fragile firebrick grooves that most manufacturers use. See this for more information.

One of the most unique features of L&L kilns is the hard ceramic element holders and ceramic terminal blocks with quick change elements. 

Andrew Seymore from Clayscapes with Jessica Putnam-Philips discussing how to find the best kiln for you

With Jessica Putnam-Phillips from Clay-Share and Andrew Seymour from Clayscapes. They discuss some basic considerations for buying a new kiln.

The L&L Spring Hinge sits far back at an angle leaving the opening unobstructed. This makes loading an L&L Kiln so much easier than most kilns. That results in less possible damage to the interior of the kiln while loading. See this for more information.

The stands that L&L makes for its standard line of kilns like the Easy-Fire line is super strong. See this link for more information.

The Spring-Assisted kiln lid lifter makes it easy to lift the lids. It also provides full view loading on your kiln. See this for more information.

The Spring-Assisted lid lifter features a safety pin that allows you to lock the lid in the open position while you load your kiln. See this for more information.

L&L Furniture Kits feature strong Cone 11 pressed high alumina hearth plates, carefully cut square posts which stay straight, and protection gloves.

Please note: L&L no longer includes kiln wash or sells it separately. Please buy that from a ceramic supply company.

Quad Element System results in longer element life through lower watt density and heavy gauge elements.

All L&L Kilns feature these solid ceramic peephole plugs. They are much stronger and heavier-duty than the typical hollow slip-cast peephole plugs you find on many competitors' kilns. Although they can break it is much less likely with these plugs.. See this for more information.

In this video we will demonstrate how to upgrade your kiln from the older Dynatrol to the new Genesis control. This process is easy as both controls use the same connectors.

• Genesis replacement board

Overview of an L&L kiln Genesis Control's home screen.

In this video we will explore how to setup WiFi on an L&L kiln Genesis Control.

In this video we will show you how to download and install firmware on your L&L kiln Genesis Control.

Learn how to setup the Bartlett Kiln Aid app to remotely monitor your L&L Genesis Control.

In this video we will break down our recommended program for your kiln's first firing using an L&L kiln Genesis Control.

In this video we will explain how to toggle Novice Mode on an L&L kiln Genesis Control.

In this video we will teach you about programming in novice mode on an L&L kiln Genesis Control.

In this video we will explore the ceramic programming options on an L&L kiln Genesis Control.

In this video we will explore custom programming on an L&L kiln Genesis Control.

In this video we will explore glass programming on an L&L Genesis Control.

In this video we will show you how to copy and edit a factory program on an L&L kiln Genesis control

In this video we will explore the adjustments you can make while actively firing on the L&L kiln Genesis Control.

In this video we will show you how to set an alarm on an L&L kiln Genesis Control.

This is an overview of the data menu on an L&L Genesis Control.

In this video we will explain how you can find the number of firings on your L&L kiln Genesis Control.

In this video we will review how to export firing logs on an L&L Genesis control.

If you are trying to troubleshoot a problem send your log files to service@hotkilns.com for analysis.

In this video we will review the options for restoring presets on an L&L kiln Genesis Control.

In this video we will explore the options for output 4 on an L&L kiln Genesis Control

In this video we will explain how you can change the number of zones in your kiln on an L&L kiln Genesis Control.

In this video we will explain how to make a Thermocouple Offset on an L&L kiln Genesis Control.

In this video we will explain how to add a cone offset on an L&L kiln Genesis Control.

In this video we will show you how to toggle between Fahrenheit and Celsius on an L&L kiln Genesis Control.

In this video we will explain how to switch your L&L kiln Genesis control from a Type K thermocouple to a Type S thermocouple.

In this video, we will show you how to calibrate the touch screen on your L&L kiln Genesis Control.

In this video we will explain how to disable or enable the glass and ceramic program menus on an L&L kiln Genesis control.

In this video, we will explore how to access the graphs of past firings provided by the L&L kiln Genesis control.