#1/4 Lock Washer - Unit is used to attach the Vent Motor to the Wall-Mount Bracket (4 per Vent)

Vent-Sure Vent System 90 Deg Elbow with a 4" Diameter

Vent-Sure Vent System Bypass Collection Box with 12" long duct - Unit is configured to attach to the Rolling Stand for the smaller Rolling Stand (for 8 sided). It is also used on all eFL Series Front Loading kilns. The tube that protrudes from the ByPass collection Box is 12" long. Includes the Collection Box, Mounting Hardware, and a Sliding Valve to regulate air flow from the kiln body.

Vent-Sure Vent System Bypass Collection Box with 18" long duct - Unit is configured to attach to the Rolling Stand for the larger Rolling Stands (for 10-sided and 12-sided kilns). The tube that protrudes from the ByPass collection Box is 18" long. Includes the Collection Box, Mounting Hardware, and a Sliding Valve to regulate air flow from the kiln body.

Vent-Sure Vent System Bypass Collection Box - Unit is configured to attach to All L&L Kilns and includes the Collection Box, Mounting Hardware, and a Sliding Valve to regulate air flow from the kiln body

Vent-Sure Vent System Wall Mount Bracket - Unit includes a Motor Mounting Plate, an Output Mounting Plate, a 12" Long x 4" Diameter Output Pipe, and Assembly Hardware

The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis). To see more details go the the Accessory Page here.

Vent-Sure Vent System Power Cord - Unit includes a cord mounted On/Off Switch

Vent-Sure Vent System Flexible Duct - Unit is 3" in Diameter and expandable from 2-1/2 feet to 8 feet and includes two adjustable Hose Clamps

Vent-Sure Vent System Flexible Duct - Unit is 3" in Diameter and expandable from 3 feet to 15 feet and includes two adjustable Hose Clamps

1. Vent-Sure Vent System Fan/Blower Motor - Unit includes the Motor plus cord and switch only with no ducts. 120 Volts. This is the motor typically used in the United States. (Note: plug is not shown in photo).
2. (See M-V-FAN0/41 for 220-240 volt motors typically used in non-US installations)
3. NOTE ABOUT REPLACING OLD FAN MOTORS: There was a change of motors in March 2008. Motors used prior to that has a slightly different mounting for the inlet duct. You will need to order this Motor Inlet Duct if you are replacing a motor on a fan made prior to March 2008.

Vent-Sure Vent System Fan/Blower Motor -  Unit includes the Motor plus cord and switch only with no ducts. 120 Volts. (Note: plug is not shown in photo). The motor runs on 220-240 volts. Not typically used in the United States. (See M-V-FAN0/00 for 120 volt motor)

Vent-Sure Vent System Assembled Fan/Blower Motor - Unit includes the Motor with Inlet Duct, Outlet Duct, Motor Mounting Plate, 90 Deg Elbow and Power Cord attached. (Does not include vent bypass box or flexible duct).

This is made from a K25 brick. Dimensions for the plug portion are 2-3/4" by 1-7/8" by 5-1/2" long and for the top portion are 2-1/2" by 2-1/2" by 4". 

Vent-Sure Vent System Motor Inlet Duct - Unit is 3" in Diameter and attaches to the Fan/Blower Motor Inlet to allow connection to the Flexible Duct

Vent-Sure Vent System Multi-Mounting Bracket - Unit attaches to the Wall Mount Bracket allowing for the Vent System to be mounted with the Outlet Duct pointed up and includes Assembly Hardware. 

The Dimensions are 8.75" tall, 10.25" wide and 8" deep.

This is made from a K25 brick. Dimensions for the plug portion are 3-1/2" by 1-1/2" by 6" long and for the top portion are 2-1/2" by 4-1/4" by 4". 

Vent-Sure Vent System T-Duct - Unit includes built-in dampers and fits onto the Motor Inlet Duct to allow two kilns to be vented by one Vent System

The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln. It ensures that your kiln gets the longest possible life from your elements and electrical components. This is so important that, if you do not have a Vent-Sure installed on your kiln, the pro-rated element warranty is in a different category.

Vent Doubler Allows The Use Of One Vent With Two Kilns.  You can get a vent doubler option which allows you to vent two kilns that are each up to 10 cubic feet.

The kit comes with The T-Duct, one 8-foot flexible Aluminum Duct, and one bypass collection box that goes onto the second stand.

The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln. It ensures that your kiln gets the longest possible life from your elements and electrical components. This is so important that, if you do not have a Vent-Sure installed on your kiln, the pro-rated element warranty is in a different category.

An 8-foot flexible duct is included. We also sell a separate 15-foot flexible duct that you can purchase for longer runs.

See here for more information.