#1/4 Lock Washer - Unit is used to attach the Vent Motor to the Wall-Mount Bracket (4 per Vent)

#1/4-20 Nut - Unit is used to attach the Vent Motor to the Wall-Mount Bracket (4 per Vent)

#10 x 1/2" Long Stainless Steel Slot Washer Head Machine Screw - Unit has a Slot/Hex Head with a "washer" formed into it.

Corrosion Resistant Aluminized Steel Stand Legs with PEM Nuts attached - Unit is used with All newer style Stand Tops in use since 2001

Zinc Plated Chest Handle - Unit is 3-1/2" Wide, includes Mounting Hardware and is used on All Easy-Fire Kiln, eQuad-Pro Kiln, School-Master Kiln, DaVinci Kiln, and Dura-Fire Kiln Sections

Corrosion Resistant Aluminized Steel Stand & Legs for use with All 10-Sided Kilns - The unit is constructed from 14 ga. steel and comes with four Legs with PEM Nuts, Hardware for assembly, and pre-installed Hole and Mounting Studs for a vent system. The stand is 21.9" square and sits 8" off the ground.

Corrosion Resistant Aluminized Steel Stand & Legs for use with All 12-Sided Kilns - The unit is constructed from 14 ga. steel and comes with four Legs with PEM Nuts, Hardware for assembly, and pre-installed Hole and Mounting Studs for a vent system. The stand is 25.7" square and sits 8" off the ground.

Corrosion Resistant Aluminized Steel Stand & Legs for use with 6-Sided kilns (like the Doll / Test Kilns)  - The unit is constructed from 14 ga. steel comes with four Legs with PEM Nuts, Hardware for assembly. The stand is 13.65" square and sits 8" off the ground.

Corrosion Resistant Aluminized Steel Stand & Legs for use with 7-Sided kilns (like the e14S-3) - The unit is constructed from 14 ga. steel comes with four Legs with PEM Nuts, Hardware for assembly, and pre-installed Hole and Mounting Studs for a vent system. The stand is 15.65" square and sits 8" off the ground.

Corrosion Resistant Aluminized Steel Stand & Legs for use with 8-Sided kilns (like the e18S-3)  - The unit is constructed from 14 ga. steel comes with four Legs with PEM Nuts, Hardware for assembly, and pre-installed Hole and Mounting Studs for a vent system. The stand is 17.8" square and sits 8" off the ground.

Complete 2nd Generation Easy-Lift Hinge for 10-Sided Kilns - Assembly includes all 2nd generation Easy-Lift Hinge components, mounting hardware, and can be used on all 10-Sided Kilns with two or more sections.

This stainless steel hinge assembly can be used to replace the older 1st generation aluminized steel hinge assemblies. You need to replace the entire assembly. See this video for how to do replace the hinge assembly.

See how to install the Spring Hinge

See how to adjust the Spring Hinge

See how to adjust spring tension on the Spring Hinge

Complete 2nd Generation Easy-Lift Hinge for 12-Sided Kilns - Assembly includes all 2nd generation Easy-Lift Hinge components, mounting hardware, and can be used on all 12-Sided Kilns with two or more sections.

This stainless steel hinge assembly can be used to replace the older 1st generation aluminized steel hinge assemblies. You need to replace the entire assembly. See this video for how to do replace the hinge assembly.

See how to install the Spring Hinge

See how to adjust the Spring Hinge

See how to adjust spring tension on the Spring Hinge

Complete Standard Non-Spring Hinge - Unit includes All Hinge Components, Mounting Hardware, Safety Chain, and can be used on All 6-Sided, 8-Sided, or 10-Sided Kilns

DaVinci Bell-Lift System Manual Brake Winch - Unit is a manually operated Hand-Crank Winch used on Bell-Lift Kilns

DaVinci Bell-Lift System Pulley - Unit is the pulley wheel that the cable used to hoist the Kiln Bell runs along

DaVinci Bell-Lift System Safety Latch - Unit is used as a safety precaution to prevent the Kiln Bell from falling when it is in the up position

DaVinci Counterbalance System Cable - Unit is an 8' Long length of 1/8" Diameter Aircraft Cable used to attach the Counterbalance Spring to the Threaded "C" Clamp

DaVinci Counterbalance System Eyebolt - Unit is used on the sides of all DaVinci Lids as an anchor to which the Safety Chains are attached

DaVinci Counterbalance System Hose Clamp - Unit is used to secure the Counterbalance Poles to the Counterbalance Weldment

DaVinci Counterbalance System Safety Chain - Unit is used on each side of the Kiln Lid to secure it in place while open

DaVinci Counterbalance System Threaded "C" Clamp - Unit is used to attach the Counterbalance Cable to the Turnbuckle

Element Cover Box for All DaVinci Kilns - Unit includes Mounting Hardware (4 sheet metal screws)

Element Cover Box Extension for All DaVinci Kilns - Unit includes Mounting Hardware (4 sheet metal screws)

Element Cover Box for All DaVinci Powered Bottoms - Unit includes Mounting Hardware (4 sheet metal screws)

Element Cover Extension Box for All DaVinci Powered Bottoms - Unit includes Mounting Hardware

Stainless Steel Band for Doll DL11 & DLH11 Kiln Sections (Rings) - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All DL11 & DLH11 Kilns

Stainless Steel Band for Doll DL11 & DLH11 Kiln Tops & Bottoms - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All DL11 & DLH11 Kilns

Zinc Plated Case Handle - Unit is 6-1/2" Wide, includes Mounting Hardware.

Locking Door Clamp/Latch for Easy-Load and Hercules front-loading kilns

Contactor Plate for Easy-Fire Kilns - Unit is aluminized steel, comes with Mounting Hardware, and is used with All Easy-Fire Kilns

Control Top Box for Easy-Fire Kilns - Unit has a corrosion resistant powder coated finish, comes with Mounting Hardware, and is used with All Easy-Fire Kilns

Element Cover Box for 3-section "M" model Easy-Fire Kilns (22.5" high) - Unit has a corrosion-resistant powder-coated finish and comes with mounting hardware, bushings, information stickers, terminal boards for thermocouples, and power wires.

Element Cover Box for 3-section "T" model Easy-Fire Kilns - Unit has a corrosion-resistant powder-coated finish and comes with mounting hardware, bushings, information stickers, terminal boards for thermocouples, and power wires.

Element Cover Box for 2-section "S" Easy-Fire Kilns - Unit has a corrosion-resistant powder-coated finish and comes with mounting hardware, bushings, information stickers, terminal boards for thermocouples, and power wires.

Insulation Blanket for Easy-Fire Kilns - Unit is prepunched, fits into the inside of the Element Cover Box, and is used with All Easy-Fire Kilns

Backing Plate for 2nd Generation Easy-Lift Hinges - Unit is used between the firebrick and stainless steel wrap where the Ring Mount will be secured to the kiln

Ceramic Handle for 2nd Generation Easy-Lift Hinges - The unit is 1" in Diameter, 7-15/16" in Length, and Includes Mounting Hardware

Acorn Nuts: M-A-ACRN/00 - (two included)
Threaded Rod: M-A-TROD/00 - (one included)

Stainless Steel Front Plate for 2nd Generation Easy-Lift Hinges - Unit secures the Lid Mount to the Kiln Top and includes Mounting Hardware

Hinge Bar for 2nd Generation Easy-Lift Hinges - Unit is 5/8" in Diameter, 9-1/4" in Length, Stainless Steel, and includes two Cotter Pins

Left Spring for 10-Sided Kiln 2nd Generation Easy-Lift Hinges

Left Spring for 12-Sided Kiln 2nd Generation Easy-Lift Hinges.

(Note the thickness of the spring wire is .316" vs .285" diameter for the 10 sided kiln hinge spring)

Lid Latch Set for 2nd Generation Easy-Lift Hinges - Unit includes the Clasp, Hook, and Mounting Hardware

Lid Mount for 10-Sided Kiln 2nd Generation Easy-Lift Hinges - Unit includes Mounting Hardware

Lid Mount for 12-Sided Kiln 2nd Generation Easy-Lift Hinges - Unit includes Mounting Hardware.

Locking Push Pin Assembly for 2nd Generation Easy-Lift Hinges - Unit includes Mounting Hardware and is used with All Easy-Lift Spring Hinges to ensure that the lid does not accidently close

Right Spring for 10-Sided Kiln 2nd Generation Easy-Lift Hinges

(Note the thickness of the spring wire is .285" vs .316" diameter for the 12 sided kiln hinge spring)

Right Spring for 12-Sided Kiln 2nd Generation Easy-Lift Hinges

(Note the thickness of the spring wire is .316" vs .285" diameter for the 10 sided kiln hinge spring)

Ring Mount for 10-Sided Kiln 2nd Generation Easy-Lift Hinges - Unit includes Mounting Hardware