A-T-23LC/00
$370.00
DaVinci Lid Channel Set for T2300. Includes the powder-coated channels that go around the lid slab, handles, and all mounting hardware.
SHOP FOR L&L KILN PARTS
SUBCATEGORIES
A-T-34LC/00
$405.00
DaVinci Lid Channel Set for T3400. Includes the powder-coated channels that go around the lid slab, handles, and all mounting hardware.
A-X-23LC/00
$310.00
DaVinci Lid Channel Set for X2300. Includes the powder-coated channels that go around the lid slab, handles, and all mounting hardware.
A-X-28LC/00
$335.00
DaVinci Lid Channel Set for X2800. Includes the powder-coated channels that go around the lid slab, handles, and all mounting hardware.
A-X-32LC/00
$345.00
DaVinci Lid Channel Set for X3200. Includes the powder-coated channels that go around the lid slab, handles, and all mounting hardware.
M-G-CLTH/00
$15.00
DaVinci Counterbalance System Threaded "C" Clamp - Unit is used to attach the Counterbalance Cable to the Turnbuckle
M-G-CNDR/18
$6.50
#8 Lid Safety Chain - Unit is precut to 16" Long, comes with Mounting Hardware, and is used to secure the Kiln Lid to the Top Ring
M-G-CNDR/23
$10.75
#8 Lid Safety Chain - Unit is precut to 28" Long, comes with Mounting Hardware, and is used to secure the Kiln Lid to the Top Ring
M-G-CNDV/00
$5.75
DaVinci Counterbalance System Safety Chain - Unit is used on each side of the Kiln Lid to secure it in place while open
M-G-EYEB/00
$12.25
DaVinci Counterbalance System Eyebolt - Unit is used on the sides of all DaVinci Lids as an anchor to which the Safety Chains are attached
M-G-HOSE/00
$10.00
DaVinci Counterbalance System Hose Clamp - Unit is used to secure the Counterbalance Poles to the Counterbalance Weldment
M-G-SAFE/CN
$49.00
Complete Safety Chain Assembly - Assembly includes the Safety Chain, Snap Clip, Screw Hook, and any Hardware
M-G-SNAP/00
$4.45
Snap Clip for the Safety Chain System - Unit should be attached to the end of the Safety Chain to hook onto the Screw Hook
M-X-CABL/00
$44.00
DaVinci Counterbalance System Cable - Unit is an 8' Long length of 1/8" Diameter Aircraft Cable used to attach the Counterbalance Spring to the Threaded "C" Clamp
S-G-BKPL/00
$17.75
Backing Plate for 2nd Generation Easy-Lift Hinges - Unit is used between the firebrick and stainless steel wrap where the Ring Mount will be secured to the kiln
S-G-COTT/00
$2.85
Cotter Pins for All Hinge Bars - Unit includes a set of two Pins
S-G-FRPL/00
$24.25
Stainless Steel Front Plate for 2nd Generation Easy-Lift Hinges - Unit secures the Lid Mount to the Kiln Top and includes Mounting Hardware
S-G-HBAR/00
$32.00
Hinge Bar for 2nd Generation Easy-Lift Hinges - Unit is 5/8" in Diameter, 9-1/4" in Length, Stainless Steel, and includes two Cotter Pins
S-G-HNGE/00
$131.00
Complete Standard Non-Spring Hinge - Unit includes All Hinge Components, Mounting Hardware, Safety Chain, and can be used on All 6-Sided, 8-Sided, or 10-Sided Kilns
S-G-HNGE/23
$500.00
Complete 2nd Generation Easy-Lift Hinge for 10-Sided Kilns - Assembly includes all 2nd generation Easy-Lift Hinge components, mounting hardware, and can be used on all 10-Sided Kilns with two or more sections.
This stainless steel hinge assembly can be used to replace the older 1st generation aluminized steel hinge assemblies. You need to replace the entire assembly. See this video for how to do replace the hinge assembly.
See how to install the Spring Hinge
See how to adjust the Spring Hinge
See how to adjust spring tension on the Spring Hinge
S-G-HNGE/28
$500.00
Complete 2nd Generation Easy-Lift Hinge for 12-Sided Kilns - Assembly includes all 2nd generation Easy-Lift Hinge components, mounting hardware, and can be used on all 12-Sided Kilns with two or more sections.
This stainless steel hinge assembly can be used to replace the older 1st generation aluminized steel hinge assemblies. You need to replace the entire assembly. See this video for how to do replace the hinge assembly.
See how to install the Spring Hinge
See how to adjust the Spring Hinge
See how to adjust spring tension on the Spring Hinge
S-G-HNPN/00
$21.00
This is the old style hinge system (still used on Doll kilns, e18 and J18 kilns)
S-G-HPIN/00
$6.00
Locking Push Pin Assembly for 2nd Generation Easy-Lift Hinges - Unit includes Mounting Hardware and is used with All Easy-Lift Spring Hinges to ensure that the lid does not accidently close
S-G-LDMT/23
$235.00
Lid Mount for 10-Sided Kiln 2nd Generation Easy-Lift Hinges - Unit includes Mounting Hardware
S-G-LDMT/28
$235.00
Lid Mount for 12-Sided Kiln 2nd Generation Easy-Lift Hinges - Unit includes Mounting Hardware.
S-G-LSPG/23
$32.00
Left Spring for 10-Sided Kiln 2nd Generation Easy-Lift Hinges
S-G-LSPG/28
$32.00
Left Spring for 12-Sided Kiln 2nd Generation Easy-Lift Hinges.
(Note the thickness of the spring wire is .316" vs .285" diameter for the 10 sided kiln hinge spring)
S-G-PINX/SM
$21.00
Hinge Bar for Standard Non-Spring Hinge - Unit is 3/8" in Diameter, 10" in Length, Chrome Plated, and includes two Cotter Pins
S-G-RGMT/23
$235.00
Ring Mount for 10-Sided Kiln 2nd Generation Easy-Lift Hinges - Unit includes Mounting Hardware
S-G-RGMT/28
$235.00
Ring Mount for 12-Sided Kiln 2nd Generation Easy-Lift Hinges - Unit includes Mounting Hardware
S-G-RSPG/23
$27.00
Right Spring for 10-Sided Kiln 2nd Generation Easy-Lift Hinges
(Note the thickness of the spring wire is .285" vs .316" diameter for the 12 sided kiln hinge spring)
S-G-RSPG/28
$27.00
Right Spring for 12-Sided Kiln 2nd Generation Easy-Lift Hinges
(Note the thickness of the spring wire is .316" vs .285" diameter for the 10 sided kiln hinge spring)
