Pottery Kiln Metal

Stainless Steel Band for Jupiter and Econo 8-Sided Kiln Sections (Rings) with 2-1/2" or 3" Brick - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All JD1800, JD1800-3, J1800, J1800-3, & K1800 Series Kilns

Stainless Steel Band for TB64 Bottom - Unit includes Hose Clamps spot-welded to the Stainless Band.

Stainless Steel Band for 10-Sided Kiln Tops or Bottoms with 2-1/2" Brick - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All Easy-Fire e23S & e23T, All Dura-Fire D23S & D23T, and All Jupiter and Econo JD2300, J2300, & K2300 Series Kilns

Stainless Steel Band for 10-Sided Kiln Tops or Bottoms with 3" Brick - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All Easy-Fire e23S-3 & e23T-3, All Dura-Fire D23S-3 & D23T-3, and All Jupiter JD2300-3 & J2300-3 Series Kilns

Stainless Steel Band for 12-Sided Kiln Tops or Bottoms with 2-1/2" Brick - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All Jupiter and Econo JD2900 & J2900 Series Kilns

Stainless Steel Band for 12-Sided Kiln Tops or Bottoms with 3" Brick - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All Easy-Fire e28S-3 & e28T-3, All Dura-Fire D28S-3 & D28T-3, and All Jupiter JD2900-3 & J2900-3 Series Kilns

Stainless Steel Band for 8-Sided Kiln Tops or Bottoms with 2-1/2" Brick - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All Easy-Fire e18S & e18T, All Liberty-Belle LB18, All Dura-Fire D18S & D18T, and All Jupiter and Econo JD1800, J1800, & K1800 Series Kilns

Stainless Steel Band for 8-Sided Kiln Tops or Bottoms with 3" Brick - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All Easy-Fire e18S-3 & e18T-3, All Liberty-Belle LB18-3, All Dura-Fire D18S-3 & D18T-3, and All Jupiter JD1800-3 & J1800-3 Series Kilns

Stainless Steel Angle Cap/Clip for lids of all Polygonal Top-Loading Kilns 

#10-24 Stainless Steel Element Terminal Bolt - Unit is 1-1/4" Long and is used for all L&L kilns.

Note: past lengths used were 1-1/2" and 1-3/4" long. This is a direct replacement and should work in all situations. 

#10 Stainless Steel Flat Fender Washer - This is the large diameter (3/4" OD) washer used to sandwich element ends on the element terminal.

Stand for all Standard Voltage Floor Mounted Control Panels - The unit is the bottom stand part of the Floor Mounted Control Panel and is used with All Non-480 Volt Floor Mounted Control Panels on DaVinci and optionally on Jupiter kilns.

Stainless Steel Band for DaVinci T2300-D & TB2300-D Series Kiln Sections (Rings) - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All T2300-D & TB2300-D Series Kilns

Stainless Steel Band for DaVinci T2300-D & TB2300-D Series Kiln Tops or Bottoms - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All T2300-D & TB2300-D Series Kilns.

IMPORTANT NOTE WHEN ORDERING: CHECK YOUR SERIAL NUMBER

If you are purchasing this band for a kiln with a serial number dated before March 1st, 2021 (see this for how to read your serial number on your data nameplate), and have not purchased a replacement brick lid for your kiln, let us know in the order. The band lengths changed at this time and we need to know this to make it to the proper length.

Stainless Steel Band for DaVinci T3400-D & TB3400-D Series Kiln Sections (Rings) - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All T3400-D & TB3400-D Series Kilns

Stainless Steel Band for DaVinci T3400-D & TB3400-D Series Kiln Tops or Bottoms - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All T3400-D & TB3400-D Series Kilns.

IMPORTANT NOTE WHEN ORDERING: CHECK YOUR SERIAL NUMBER

If you are purchasing this band for a kiln with a serial number dated before March 1st, 2021 (see this for how to read your serial number on your data nameplate), and have not purchased a replacement brick lid for your kiln, let us know in the order. The band lengths changed at this time and we need to know this to make it to the proper length.

Stainless Steel Band for DaVinci X1800-D & XB1800-D Series Kiln Sections (Rings) - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All X1800-D & XB1800-D Series Kilns

Stainless Steel Band for DaVinci X1800-D & XB1800-D Series Kiln Tops or Bottoms - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All X1800-D & XB1800-D Series Kilns

Stainless Steel Band for DaVinci X2300-D & XB2300-D Series Kiln Sections (Rings) - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All X2300-D & XB2300-D Series Kilns

Stainless Steel Band for DaVinci X2300-D & XB2300-D Series Kiln Tops or Bottoms - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All X2300-D & XB2300-D Series Kilns. 

IMPORTANT NOTE WHEN ORDERING: CHECK YOUR SERIAL NUMBER

If you are purchasing this band for a kiln with a serial number dated before March 1st, 2021 (see this for how to read your serial number on your data nameplate), and have not purchased a replacement brick lid for your kiln, let us know in the order. The band lengths changed at this time and we need to know this to make it to the proper length.

Stainless Steel Band for DaVinci X2800-D & XB2800-D Series Kiln Sections (Rings) - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All X2800-D & XB2800-D Series Kilns

Stainless Steel Band for DaVinci X2800-D & XB2800-D Series Kiln Tops or Bottoms - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All X2800-D & XB2800-D Series Kilns. 

IMPORTANT NOTE WHEN ORDERING: CHECK YOUR SERIAL NUMBER

If you are purchasing this band for a kiln with a serial number dated before March 1st, 2021 (see this for how to read your serial number on your data nameplate), and have not purchased a replacement brick lid for your kiln, let us know in the order. The band lengths changed at this time and we need to know this to make it to the proper length.

Stainless Steel Band for DaVinci X3200-D & XB3200-D Series Kiln Sections (Rings) - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All X3200-D & XB3200-D Series Kilns

Stainless Steel Band for DaVinci X3200-D & XB3200-D Series Kiln Tops or Bottoms - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All X3200-D & XB3200-D Series Kilns.

IMPORTANT NOTE WHEN ORDERING: CHECK YOUR SERIAL NUMBER

If you are purchasing this band for a kiln with a serial number dated before March 1st, 2021 (see this for how to read your serial number on your data nameplate), and have not purchased a replacement brick lid for your kiln, let us know in the order. The band lengths changed at this time and we need to know this to make it to the proper length.

1/4"-20 x 1/2" Long Zinc Plated Hex Bolt - Unit has a hex head and is used in conjunction with Multi-Mounting Brackets and Polygonal Kiln Stands

#10-24 Zinc-Plated Hex Nut - Unit is used for mounting the Vent Bypass Box, Contactor Plate in the Control Panel, and for the Element Terminal Bolts