BELL-LIFT KILNS

BELL-LIFT KILNS

Home> All L&L Kiln Series> BELL-LIFT KILNS
KILN:

T3436-BL Bell-Lift Kiln

Bell-Lift design makes loading easy. Kiln moves up and there is access from all four sides. 

KILN:

T3436-BL Bell-Lift Kiln

Bell-Lift design makes loading easy. Kiln moves up and there is access from all four sides. 

    KEY SPECS
  • Large
    (27.6 cubic feet)
  • Genesis Multi-Zone Touchscreen Control
  • Cone 10, 2350F, 1290C
$32,500
ESTIMATED LEAD TIME: 14 to 16 Weeks
See Lead Times & Confirmation Process
WHERE TO BUY
Spec Sheet Drawing Instructions

Bell-Lift design makes loading easy. Kiln moves up and there is access from all four sides for loading. Includes motorized lift, three-Zone Multi-Program DynaTrol. Steel frame bolts together easily for assembly. A higher-power model TB3436-BL is available. Models with a powered bottom (T3436-BL-PB or TB3436-BL-PB) are also available. Look up comparable DaVinci models for electrical specifications or contact the factory. A high hearth is available as an option. There are three thermocouples. No charge for 3-phase versions. C-MET-us is listed in the USA & Canada. Cone 10 for all voltages. 

Schedule a free consultation now by emailing industry@hotkilns.com

See the Crating Charges and Export Options here.

See this Checklist before ordering

Bell-Lift Kilns include Genesis Touchscreen Multi-Zone Control

Furniture Kit for T3436 DaVinci
  • Part Number:
    H-T-K536/00
  • Includes: Twelve 28" X 14" X 3/4" Rectangular Shelves (3/4" thick), Twelve Each 1/2", 1", 2", 4", 6", and 8" Square Posts, and One Pair Heat Resistant Gloves
  • Price:
    $1,925.00
  • Insulation:
    3" K23 Firebrick Sides & Bottom, 4" Ceramic Fiber Modules on Roof
  • Sections:
    Four 9" high sections
  • Inside Dimensions:
    43.50"
    Wide x
    30.50"
    Deep x
    36.00"
    High (110.49 cm Wide x 77.47 cm Deep x 91.44 cm High)
  • Outside Dimensions:
    89.00"
    Wide x
    70.00"
    Deep x
    111.00"
    High (226.06 cm Wide x 177.8 cm Deep x 281.94 cm High)
  • Weight:
    1905
    lbs (864 kg)
SKU Model Number Watts Volts Phase Fuse Size
K-C-3436/21 T3436-BL-208-1Ph 33,248 208 Single Phase 200 Amp
  • Additional Information
  • Amps: 159.8
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 250 mcm
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Price: $32,500
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-C-3436/22 T3436-BL-208-3Ph 33,248 208 Three Phase (Delta) 150 Amp
  • Additional Information
  • Amps: 105.7
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 3/0 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Price: $32,500
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-C-3436/31 T3436-BL-240-1Ph 33,248 240 Single Phase 175 Amp
  • Additional Information
  • Amps: 138.5
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 4/0 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Price: $32,500
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-C-3436/32 T3436-BL-240-3Ph 33,248 240 Three Phase (Delta) 125 Amp
  • Additional Information
  • Amps: 91.6
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1/0 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Price: $32,500
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-C-3436/62 T3436-BL-480-3Ph 33,248 460-480 Three Phase (Delta) 50 Amp
  • Additional Information
  • Amps: 40
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Three Elements in Wye with 277 Volts per element
  • Max Temperature: Cone 10, 2350F, 1290C
  • Price: $32,500
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-C-3436/41 T3436-BL-220-1Ph 33,248 220-230 Single Phase 200 Amp
  • Additional Information
  • Amps: 151.1
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 250 mcm
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Price: $32,500
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-C-3436/52 T3436-BL-380-3PY 33,248 380 Three Phase (Wye) 100 Amp
  • Additional Information
  • Amps: 75.6
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Price: $32,500
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-C-3436/82 T3436-BL-400-3PY 33,248 400 Three Phase (Wye) 100 Amp
  • Additional Information
  • Amps: 72.3
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Price: $32,500
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-C-3436/72 T3436-BL-415-3PY 33,248 415 Three Phase (Wye) 90 Amp
  • Additional Information
  • Amps: 69.3
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 2 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Price: $32,500
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):

Control

Genesis Touch Screen Control
The Genesis control includes a touchscreen interface and WIFI connectivity. The intuitive interface is easy to use and understand. A free phone app allows you to monitor your kiln remotely.
Automatic Zone Control
EVEN FIRING. MAKES LOADING MORE FLEXIBLE. ADJUSTS FOR ELEMENT AGING. No need to pay extra for this important feature! Zone control on an electric kiln gives you the utmost controllable temperature uniformity. The kiln control separately measures temperatures in the bottom, middle, and top of the ceramic kiln and automatically adjusts the heat output of three kiln zones during the entire glaze or bisque firing.
Industrial Wiring (DaVinci & Easy-Load)
PROFESSIONAL AND CLEAN LAYOUT. DaVinci Panels are wired to industrial standards with a good clean wire layout.
Floor-Standing Panel Away from Kiln (DaVinci)
ALLOWS THE SECTIONS TO PLUG IN WHILE SEPARATE FROM THE KILN. The control panel is mounted on a stand away from the kiln.

Durability

Protected Thermocouples
KEEP YOUR WORK CLEAN. Ceramic protection tubes protect the end of the thermocouple. Keeps the oxide dust from the thermocouple tip from getting into the kiln while firing.
Heavy-Duty Type K Thermocouples
HEAVY-DUTY. Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
Hard Ceramic Element Channels
NO PINS TO REPLACE AND DAMAGE YOUR FIREBRICK! Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
Strong Arched Sides with Extra Airspace (DaVinci)
EXTRA SPACE GIVES YOUR WORK BREATHING ROOM. Arched sides on DaVinci kilns are very strong and promote good air circulation
"No Crimp" Ceramic Element Connections
NO CRIMPING! EASY TO CHANGE. Industrial-grade ceramic terminal blocks make changing elements easy. All contact between elements and wire lugs is over a wide surface of heavily torqued stainless steel washers. Wires are not crimped to element ends as in some other brands. This means you can change elements yourself without buying an expensive tool or hiring a kiln repair person.
Solid Wide-View Peephole Plugs
STOP BREAKING PEEPHOLE PLUGS. Solid large non-tapered peepholes allow a wider view into the kiln. The peephole plugs are made from solid ceramic and are not as fragile as hollow-type plugs used on competitors' kilns.
Corrosion Resistant Case
KEEP YOUR KILN LOOKING NEW. Corrosion resistant materials and methods result in a long-lasting kiln.

Support

Two-Year Commercial Limited Warranty
Easy-Load and Bell-Lift Kilns have a Two-Year Commercial Limited Warranty.
Superior Technical Support
LET OUR EXPERIENCE WORK FOR YOU. The combined experience at L&L Kilns in kilns, ceramics, electrical engineering, and process engineering is unsurpassed. We work as a team to help you get your answers and help.
Visual Instruction Manual
LIKE HAVING A KILN LIBRARY AT YOUR FINGERTIPS. The combined experience at L&L Kilns in kilns, ceramics, electrical engineering, and process engineering is unsurpassed. We provide a visual parts list with photographs, part numbers, prices, and helpful information to reduce confusion when ordering parts. We also include well-vetted information and wisdom from our industry partners to ensure our customers have access to all the basic information necessary to be successful from the first firing.

Safety

Listed to UL499 Standard by MET
CERTIFIED SAFE. Most L&L kilns are MET listed to UL499 standards. Listed kilns include Easy-Fire Pottery Kilns, eQuad-Pro Professional Kilns, eFL Front-Loading Kilns, Jupiter Sectional Kilns, DaVinci Square & Rectangular Production Kilns, School-Master School Kilns, Fuego Home Craft Kilns, and Doll-Test Kilns. Easy-Load Production Front-Loading kilns are MET-Us Listed for the USA only.

Elements

APM Sintered Powder Metal Elements
APM elements increase element life in difficult applications

Thermocouples

Type S Platinum Thermocouples
Type S Platinum Thermocouples are recommended for high fire applications. NOTE: Price of upgrade is per each thermocouple.
Pyrocil Metal Sheathed Industrial Thermocouples
Pyrocil thermocouples are sensitive but limited to about 2200°F but offer greater sensitivity to temperature change and so may be appropriate in applications below 2200°F that require sensitivity. NOTE: Price of upgrade is per each thermocouple.

Vents

Vent-Sure Downdraft Kiln Vent System
A Critical component in the longevity of your kiln!The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln.
Vent Control (Automatic Venting)
The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with the control.

Kiln Furniture

Furniture Kits
Kiln furniture kits are the recommended set of ceramic shelves, posts, and heat-resistant gloves for each kiln model. These are for loading the work in the kiln.
Safety Gloves
These safety gloves are perfect for handling hot work when unloading a kiln.

Controls

DynaTrol Keypad Control
Traditional 24-button Keypad control. This control can be substituted for any Genesis full-sized control.
Solid State Relays
Solid State Relays are quiet and result in longer element life because the switching time is so fast the elements don’t heat and cool as much the way the will with regular mechanical contactors. The whole system includes heat sinks, special fast acting fuses, cooling fan and extra safety relays.
Electronic High Limit Back Up Control & Contactors
Electronic High Limit Back Up Control acts as an upper limit back up to the main control. Back up contactors are also available.

Power

480 Volt Option
L&L's 480 volt option can include a NEMA 1 control panel
120 Volt Power Supply & Electrical Noise Filter For Automatic Kilns
This option helps protect your control from electrical noise
Powered Bottoms For DaVinci Kilns
Powered bottoms increase power and can aid uniformity in large kilns

Shipping/Crating

Crating Options for Bell-Lift Kilns
  • Kiln:
    Skid #1: 48 IN Wide X 64 IN Deep X 64 IN High | Skid #2: 48 IN Wide X 80 IN Deep X 82 IN High
    (
    Skid #1: 122 CM Wide X 163 CM Deep X 163 CM High | Skid #2: 122 CM Wide X 204 CM Deep X 209 CM High
    )
  • Ship Weight:
    2105
    lbs (955 kg)
  • Kiln with Furniture Kit:
    Skid #1: 48 IN Wide X 64 IN Deep X 64 IN High | Skid #2: 48 IN Wide X 80 IN Deep X 82 IN High
    (
    Skid #1: 122 CM Wide X 163 CM Deep X 163 CM High | Skid #2: 122 CM Wide X 204 CM Deep X 209 CM High
    )
  • Ship Weight:
    2365
    lbs (1073 kg)
  • Kiln with Vent:
    Skid #1: 48 IN Wide X 64 IN Deep X 64 IN High | Skid #2: 48 IN Wide X 80 IN Deep X 82 IN High
    (
    Skid #1: 122 CM Wide X 163 CM Deep X 163 CM High | Skid #2: 122 CM Wide X 204 CM Deep X 209 CM High
    )
  • Ship Weight:
    2135
    lbs (968 kg)
  • Kiln with Vent and Furniture Kit:
    Skid #1: 48 IN Wide X 64 IN Deep X 64 IN High | Skid #2: 48 IN Wide X 80 IN Deep X 82 IN High
    (
    Skid #1: 122 CM Wide X 163 CM Deep X 163 CM High | Skid #2: 122 CM Wide X 204 CM Deep X 209 CM High
    )
  • Ship Weight:
    2395
    lbs (1086 kg)
  • Packaging:

    See the Bell-Lift Crating Charges and Export Options here.

Turntable View

T3436-BL Bell-Lift Kiln
Compare L&L Kilns
EL3048 Front-Loading Kiln
Kiln EL3048 Front-Loading Kiln
Description

Industrial Grade Front-Loader
Price $34,400.00
Type
Volume 25.0 cubic feet
Temperature Cone 10, 2350F, 1290C