TB644754  480 (277) Volt/1 & 3 Phase Heated Section - Unit is one complete 9" high

TB644754 Bottom Firebrick Slab - Unit includes a four piece cemented 3" Brick Slab wrapped in the Stainless Steel Band. Shipped on one skid with four pieces stacked. Must be assembled in the field by wrapping the stainless steel band around the pieces. The brick is K23.

Thermocouple Terminal Strip - Unit has Six 3/16" Spade Terminals on each side, comes with a Terminal Strip Marker Board and is used for the Thermocouple Wires on drop-down Control Panels

Type-K Yellow Thermocouple Lead Wire.

Rated to 105C, cut to length specified by customer. 

Type-S Thermocouple Lead Wire - shielded.

Rated to 105C, cut to length specified by customer. 

Top or Bottom Firebrick Slab for Plug-n-Fire PF8 kilns with 3" top and bottom. Wrapped in the Stainless Steel Band. Does not include handle or hinge metal. 

Top Firebrick Slab for e23S-JH & JD230-JH Kilns - Unit includes a cemented 3" K2500 Brick Slab wrapped in the Stainless Steel Band.

Top Firebrick Slab for All Easy-Fire e23S & e23T Kilns, All SM23T Kilns, All Dura-Fire D23S & D23T Kilns, and All Jupiter and Econo JD2300, J2300, & K2300 Series Kilns - Unit includes a cemented 2-1/2" Brick Slab wrapped in the Stainless Steel Band with Angle Clips. Door handle included.

Top Firebrick Slab for All Easy-Fire e23S-3 & e23T-3 Kilns, All SM23T-3 Kilns, All Dura-Fire D23S-3 & D23T-3 Kilns, and All Jupiter JD2300-3 & J2300-3 Series Kilns - Unit includes a cemented 3" Brick Slab wrapped in the Stainless Steel Band with Angle Clips

Top Firebrick Slab for JD2927-JH Kilns - Unit includes a cemented 3" K2500 Brick Slab wrapped in the Stainless Steel Band. 

Top Firebrick Slab for All Jupiter and Econo JD2900 & J2900 Series Kilns - Unit includes a cemented 2-1/2" Brick Slab wrapped in the Stainless Steel Band with Angle Clips

Top Firebrick Slab for All Easy-Fire e28S-3 & e28T-3 Kilns, All SM28T-3 Kilns, All Dura-Fire D28S-3 & D28T-3 Kilns, eQuad-Pro eQ2827-3, eQ2836-3, and All Jupiter JD2900-3 & J2900-3 Series Kilns - Unit includes a cemented 3" Brick Slab wrapped in the Stainless Steel Band with Angle Clips.

Top Firebrick Slab for All Econo J1400 & K1400 Series Kilns - Unit includes a cemented 2-1/2" Brick Slab wrapped in the Stainless Steel Band with Angle Clips

Top Firebrick Slab for e14-3 Kilns - Unit includes a cemented 3" Brick Slab wrapped in the Stainless Steel Band

top Firebrick Slab for JD18-JH Kilns - Unit includes a cemented 3" K2500 Brick Slab wrapped in the Stainless Steel Band. 

Top Firebrick Slab for All Easy-Fire e18S & e18T Kilns, All Liberty-Belle LB 18 Kilns, All Dura-Fire D18S & D18T Kilns, and All Jupiter and Econo JD1800, J1800, & K1800 Series Kilns - Unit includes a cemented 2-1/2" Brick Slab wrapped in the Stainless Steel Band, Angle Clips. Door handle included.

Top Firebrick Slab for All Easy-Fire e18S-3 & e18T-3 Kilns, All Liberty-Belle LB18-3 Kilns, All Dura-Fire D18S-3 & D18T-3 Kilns, and All Jupiter JD1800 & J1800 Series Kilns - Unit includes a cemented 3" Brick Slab wrapped in the Stainless Steel Band, Angle Clips, and Handle

Type-K 8 Gauge Thermocouple (Exposed) with Ceramic Terminal Block - Unit is 6-1/2" Long x 1/2" Diameter

Click here to read more about thermocouples.

Type-K 8 Gauge Thermocouple (Exposed) with Ceramic Terminal Block - Ceramic tube is 4" Long x 1/2" Diameter.

Click here to read more about thermocouples.

Type-K 8 Gauge Thermocouple (Exposed) with Element ONLY - no Terminal Block - Metal element is 6" Long with a 4" long ceramic insulator tube that is 1/2" diameter. The negative wire is marked with red. 

This is meant for kilns with 2.5", 3", or 3.5" insulation (brick + backup insulation if present). 

Click here to read more about thermocouples.

Type-K Industrial Grade Pyrosil Sheathed Thermocouples with Ceramic Terminal Block - Unit is 5" Long x 1/4" Diameter. Used on DaVinci, Jupiter, Easy-Fire and other kilns with 2-1/2" or 3" brick walls.

Click here to read more about thermocouples.

Type-K Industrial Grade Pyrosil Sheathed Thermocouples with Ceramic Terminal Block - Unit is 6-1/2" Long x 1/4" Diameter. Used on Hercules and Easy-Load kilns where wall thickness is 5".

Click here to read more about thermocouples.

Type S Platinum Thermocouple with Alumina Protection Tube and Terminal Block - Unit is 120 mm (4-3/4") Long x 1/4" Diameter.

Used on JH Series kilns (as standard), optional on Easy-Fire, Jupiter, DaVinci, eFL Series, Easy-Fire XT, Bell-Lift, Doll with DynaTrol)

Click here to read more about thermocouples.

Type S Platinum Thermocouple with Alumina Protection Tube and Terminal Block - Unit is 180 mm (7") Long x 1/4" Diameter. Used on Hercules and Easy-Load kilns where wall thickness is 5".

Click here to read more about thermocouples.

Vent Doubler Allows The Use Of One Vent With Two Kilns.  You can get a vent doubler option which allows you to vent two kilns that are each up to 10 cubic feet.

The kit comes with The T-Duct, one 8-foot flexible Aluminum Duct, and one bypass collection box that goes onto the second stand.

Vent-Sure Vent System Flexible Duct - Unit is 3" in Diameter and expandable from 3 feet to 15 feet and includes two adjustable Hose Clamps

Vent-Sure Vent System T-Duct - Unit includes built-in dampers and fits onto the Motor Inlet Duct to allow two kilns to be vented by one Vent System. Inlets and outlet are 3in diameter.

Vent-Sure Vent System Flexible Duct - Unit is 3" in Diameter and expandable from 2-1/2 feet to 8 feet and includes two adjustable Hose Clamps

Vent-Sure Vent System 90 Deg Elbow with a 4" Diameter

Vent-Sure Vent System Assembled Fan/Blower Motor - Unit includes the Motor with Inlet Duct, Outlet Duct, Motor Mounting Plate, 90 Deg Elbow and Power Cord attached. (Does not include vent bypass box or flexible duct).

Vent-Sure Vent System Bypass Collection Box - Unit is configured to attach to All L&L Kilns and includes the Collection Box, Mounting Hardware, and a Sliding Valve to regulate air flow from the kiln body

1. Vent-Sure Vent System Fan/Blower Motor - Unit includes the Motor plus cord and switch only with no ducts. 120 Volts. This is the motor typically used in the United States. (Note: plug is not shown in photo).
2. (See M-V-FAN0/41 for 220-240 volt motors typically used in non-US installations)
3. NOTE ABOUT REPLACING OLD FAN MOTORS: There was a change of motors in March 2008. Motors used prior to that has a slightly different mounting for the inlet duct. You will need to order this Motor Inlet Duct if you are replacing a motor on a fan made prior to March 2008.

Vent-Sure Vent System Fan/Blower Motor -  Unit includes the Motor plus cord and switch only with no ducts. 120 Volts. (Note: plug is not shown in photo). The motor runs on 220-240 volts. Not typically used in the United States. (See M-V-FAN0/00 for 120 volt motor)

Vent-Sure Vent System Motor Inlet Duct - Unit is 3" in Diameter and attaches to the Fan/Blower Motor Inlet to allow connection to the Flexible Duct