June 20, 2025
|
|---|
SHOP KILN PARTS
R-S-28T3/31
$1,605.00
School-Master SM28T-3 240 Volt/1 Phase Heated Section - Unit is one complete 9" high Section (Ring) wired for use with All SM28T-3 Kilns with 3" Brick at this Voltage and Phase (Whether Top/Middle elements or Bottom elements are needed must be specified) 
E-S-28TB/31
$70.00
Voltage:
240
Size (Diameter):
Large- (.46" OD, 2004-Present)
School-Master SM28T-3 240 Volt/1 Phase Bottom Element (.46" Outside Diameter) - Used on All Bottom rings on SM28T-3 Kilns at this Voltage and Phase
E-S-28TT/31
$70.00
Voltage:
240
Size (Diameter):
Large- (.46" OD, 2004-Present)
School-Master SM28T-3 240 Volt/1 Phase Top Element (.46" Outside Diameter) - Used on All Top and Middle rings on SM28T-3 Kilns at this Voltage and Phase
E-S-28BS/31
$70.00
Voltage:
240
Size (Diameter):
Large- (.46" OD, 2004-Present)
School-Master SM28T-3 240 Volt/1 Phase Bottom Element (.383" Outside Diameter) - Used on All Bottom rings on SM28T-3 Kilns at this Voltage and Phase (Special small diameter elements used on only a few kilns)
E-S-28TS/31
$70.00
Voltage:
240
Size (Diameter):
Large- (.46" OD, 2004-Present)
School-Master SM28T-3 240 Volt/1 Phase Top Element (.383" Outside Diameter) - Used on All Top and Middle rings on SM28T-3 Kilns at this Voltage and Phase. (Special small diameter elements used on only a few kilns) 
R-S-28T3/32
$1,605.00
School-Master SM28T-3 240 Volt/3 Phase Heated Section - Unit is one complete 9" high Section (Ring) wired for use with All SM28T-3 Kilns with 3" Brick at this Voltage and Phase
E-S-28TB/32
$70.00
Voltage:
240
Size (Diameter):
Large- (.46" OD, 2004-Present)
School-Master SM28T-3 240 Volt/3 Phase Bottom Element (.46" Outside Diameter) - Used on All Bottom rings on SM28T-3 Kilns at this Voltage and Phase
E-S-28TT/32
$70.00
Voltage:
240
Size (Diameter):
Large- (.46" OD, 2004-Present)
School-Master SM28T-3 240 Volt/3 Phase Top Element (.46" Outside Diameter) - Used on All Top and Middle rings on SM28T-3 Kilns at this Voltage and Phase 
C-G-SPKT/SM
$87.00
Kit includes four each of 1/2", 1", 2", 4" & 6" high 1-1/2" Square Ceramic Posts 
M-A-SPAK/00
$4.30
Set of Spade Wire Terminals that are used to connect wires to the 4-Way Arkless Input Switch. 
M-A-SP00/00
$3.55
Set of Spade Wire Terminals that are used to connect wires to the Robert Shaw INF Infinite Input Switch. NO IMAGE
E-S-1518/20
$72.00
Voltage:
208
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
E-S-1518/30
$72.00
Voltage:
240
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
E-S-1818/20
$84.00
Voltage:
208
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
E-S-1818/30
$84.00
Voltage:
240
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
NO IMAGE
E-S-1827/20
$84.00
Voltage:
208
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
E-S-1827/30
$84.00
Voltage:
240
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
E-S-2418/20
$96.00
Voltage:
208
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
E-S-2418/30
$96.00
Voltage:
240
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
E-S-2427/20
$96.00
Voltage:
208
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
E-S-2427/30
$96.00
Voltage:
240
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
S-E-2318/00
$87.00
Stainless Steel Band for Easy-Fire 10-Sided Kiln Sections (Rings) with 2-1/2" or 3" Brick - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All e23S, e23S-3, e23T, & e23T-3 Kilns 
S-J-2300/00
$96.00
Stainless Steel Band for Jupiter and Econo 10-Sided Kiln Sections (Rings) with 2-1/2" or 3" Brick - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All JD2300, JD2300-3, J2300, J2300-3, & K2300 Series Kilns 
S-E-2818/00
$108.00
Stainless Steel Band for Easy-Fire 12-Sided Kiln Sections (Rings) with 3" Brick - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All e28S-3 & e28T-3 Kilns 
S-J-2900/00
$113.00
Stainless Steel Band for Jupiter and Econo 12-Sided Kiln Sections (Rings) with 2-1/2" or 3" Brick - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All JD2900, JD2900-3, J2900, & J2900-3 Series Kilns 
S-E-1818/00
$77.00
Stainless Steel Band for Easy-Fire 8-Sided Kiln Sections (Rings) with 2-1/2" or 3" Brick - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All e18S, e18S-3, e18T, & e18T-3 Kilns 
S-J-1800/00
$85.00
Stainless Steel Band for Jupiter and Econo 8-Sided Kiln Sections (Rings) with 2-1/2" or 3" Brick - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All JD1800, JD1800-3, J1800, J1800-3, & K1800 Series Kilns 
S-J-23T2/00
$66.00
Stainless Steel Band for 10-Sided Kiln Tops or Bottoms with 2-1/2" Brick - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All Easy-Fire e23S & e23T, All Dura-Fire D23S & D23T, and All Jupiter and Econo JD2300, J2300, & K2300 Series Kilns 
S-J-23T3/00
$66.00
Stainless Steel Band for 10-Sided Kiln Tops or Bottoms with 3" Brick - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All Easy-Fire e23S-3 & e23T-3, All Dura-Fire D23S-3 & D23T-3, and All Jupiter JD2300-3 & J2300-3 Series Kilns
S-J-29T2/00
$66.00
Stainless Steel Band for 12-Sided Kiln Tops or Bottoms with 2-1/2" Brick - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All Jupiter and Econo JD2900 & J2900 Series Kilns
S-J-29T3/00
$72.00
Stainless Steel Band for 12-Sided Kiln Tops or Bottoms with 3" Brick - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All Easy-Fire e28S-3 & e28T-3, All Dura-Fire D28S-3 & D28T-3, and All Jupiter JD2900-3 & J2900-3 Series Kilns
S-J-18T2/00
$54.00
Stainless Steel Band for 8-Sided Kiln Tops or Bottoms with 2-1/2" Brick - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All Easy-Fire e18S & e18T, All Liberty-Belle LB18, All Dura-Fire D18S & D18T, and All Jupiter and Econo JD1800, J1800, & K1800 Series Kilns
S-J-18T3/00
$54.00
Stainless Steel Band for 8-Sided Kiln Tops or Bottoms with 3" Brick - Unit includes Hose Clamps spot welded to the Stainless Band and is used with All Easy-Fire e18S-3 & e18T-3, All Liberty-Belle LB18-3, All Dura-Fire D18S-3 & D18T-3, and All Jupiter JD1800-3 & J1800-3 Series Kilns 
S-J-CLIP/29
$8.55
Stainless Steel Angle Cap/Clip for lids of all Polygonal Top-Loading Kilns 
L-G-TERM/LG
$1.50
#10-24 Stainless Steel Element Terminal Bolt - Unit is 1-1/4" Long and is used for all L&L kilns. Note: past lengths used were 1-1/2" and 1-3/4" long. This is a direct replacement and should work in all situations. 
L-G-WASH/EU
$0.70
#10 Stainless Steel Flat Fender Washer - This is the large diameter (3/4" OD) washer used to sandwich element ends on the element terminal. 
L-G-SNUT/00
$1.00
#10-24 Stainless Steel Hex Nut - Unit is used for mounting the Vent Bypass Box and Contactor Plates and for the Element Terminal Bolts 
L-X-STND/00
$216.00
Stand for all Standard Voltage Floor Mounted Control Panels - The unit is the bottom stand part of the Floor Mounted Control Panel and is used with All Non-480 Volt Floor Mounted Control Panels on DaVinci and optionally on Jupiter kilns. 
C-G-PEEP/00
$15.25
Ceramic Peep Hole Plug - Unit is a 1" Diameter x 5" Long Top Hat Style Plug (Stepped Head has a 2" Diameter and serves as a heat lock) 
T-G-MKIT/00
$9.85
Mounting Kit for Type-K 8 Gauge Thermocouples - Kit includes two #6 1-1/2" Screws, six 1/4" high Ceramic Spacers. (note that the photo does not represent this exactly) 
E-T-2300/2L
$108.00
Voltage:
208
Size (Diameter):
Large- (.46" OD, 2004-Present)
DaVinci T2300 Series 208 Volt/1 & 3 Phase large Element (.46" Outside Diameter) - Used on All T2300 Series Kilns at this Voltage Voltage with a Serial Number of or succeeding "060104-A" (Made on or after June 1, 2004) 
E-T-2300/2Q
$190.00
Voltage:
208
Size (Diameter):
Quad (Always Large Diameter)
DaVinci T2300 Series 208 Volt/1 & 3 Phase Quad Element (.46" Outside Diameter) - Used on All T2300 Series Quad Kilns at this Voltage Voltage
E-T-2300/20
$108.00
Voltage:
208
Size (Diameter):
Gray (DaVinci only 1985-2004)
DaVinci T2300 Series 208 Volt/1 & 3 Phase Small Element (.41" Outside Diameter) - Used on All T2300 Series Kilns at this Voltage with a Serial Number preceding "060104-A" (Made before June 1, 2004)
E-T-2300/4Q
$190.00
Voltage:
220 or 380 3 Phase Wye
Size (Diameter):
Quad (Always Large Diameter)
DaVinci T2300 220V 1 Phase & 380v 3 Phase Wye Quad Element (.46" Outside Diameter) - Used on All T2300 Series Quad Kilns at this Voltage Voltage |
©2025 L&L Kiln Mfg Inc
https://hotkilns.com/pottery-kiln-parts/ceramics/posts
