Top Firebrick Slab for e14-3 Kilns - Unit includes a cemented 3" Brick Slab wrapped in the Stainless Steel Band

Top Firebrick Slab for All Easy-Fire e18S & e18T Kilns, All Liberty-Belle LB 18 Kilns, All Dura-Fire D18S & D18T Kilns, and All Jupiter and Econo JD1800, J1800, & K1800 Series Kilns - Unit includes a cemented 2-1/2" Brick Slab wrapped in the Stainless Steel Band, Angle Clips. Door handle included.

Top Firebrick Slab for All Easy-Fire e18S-3 & e18T-3 Kilns, All Liberty-Belle LB18-3 Kilns, All Dura-Fire D18S-3 & D18T-3 Kilns, and All Jupiter JD1800 & J1800 Series Kilns - Unit includes a cemented 3" Brick Slab wrapped in the Stainless Steel Band, Angle Clips, and Handle

Type-K 8 Gauge Thermocouple (Exposed) with Element ONLY - no Terminal Block - Metal element is 6" Long with a 4" long ceramic insulator tube that is 1/2" diameter. The negative wire is marked with red. 

This is meant for kilns with 2.5", 3", or 3.5" insulation (brick + backup insulation if present). 

Click here to read more about thermocouples.

Type-K 8 Gauge Thermocouple (Exposed) with Ceramic Terminal Block - Ceramic tube is 4" Long x 1/2" Diameter.

Click here to read more about thermocouples.

Type-K Industrial Grade Pyrosil Sheathed Thermocouples with Ceramic Terminal Block - Unit is 5" Long x 1/4" Diameter. Used on DaVinci, Jupiter, Easy-Fire and other kilns with 2-1/2" or 3" brick walls.

Click here to read more about thermocouples.

Type S Platinum Thermocouple with Alumina Protection Tube and Terminal Block - Unit is 120 mm (4-3/4") Long x 1/4" Diameter.

Used on JH Series kilns (as standard), optional on Easy-Fire, Jupiter, DaVinci, eFL Series, Easy-Fire XT, Bell-Lift, Doll with DynaTrol)

Click here to read more about thermocouples.

Vent-Sure Vent System Flexible Duct - Unit is 3" in Diameter and expandable from 3 feet to 15 feet and includes two adjustable Hose Clamps

Vent-Sure Vent System T-Duct - Unit includes built-in dampers and fits onto the Motor Inlet Duct to allow two kilns to be vented by one Vent System. Inlets and outlet are 3in diameter.

Vent-Sure Vent System Flexible Duct - Unit is 3" in Diameter and expandable from 2-1/2 feet to 8 feet and includes two adjustable Hose Clamps

Vent-Sure Vent System 90 Deg Elbow with a 4" Diameter

Vent-Sure Vent System Assembled Fan/Blower Motor - Unit includes the Motor with Inlet Duct, Outlet Duct, Motor Mounting Plate, 90 Deg Elbow and Power Cord attached. (Does not include vent bypass box or flexible duct).

Vent-Sure Vent System Bypass Collection Box - Unit is configured to attach to All L&L Kilns and includes the Collection Box, Mounting Hardware, and a Sliding Valve to regulate air flow from the kiln body

1. Vent-Sure Vent System Fan/Blower Motor - Unit includes the Motor plus cord and switch only with no ducts. 120 Volts. This is the motor typically used in the United States. (Note: plug is not shown in photo).
2. (See M-V-FAN0/41 for 220-240 volt motors typically used in non-US installations)
3. NOTE ABOUT REPLACING OLD FAN MOTORS: There was a change of motors in March 2008. Motors used prior to that has a slightly different mounting for the inlet duct. You will need to order this Motor Inlet Duct if you are replacing a motor on a fan made prior to March 2008.

Vent-Sure Vent System Fan/Blower Motor -  Unit includes the Motor plus cord and switch only with no ducts. 120 Volts. (Note: plug is not shown in photo). The motor runs on 220-240 volts. Not typically used in the United States. (See M-V-FAN0/00 for 120 volt motor)

Vent-Sure Vent System Motor Inlet Duct - Unit is 3" in Diameter and attaches to the Fan/Blower Motor Inlet to allow connection to the Flexible Duct

Vent-Sure Vent System Multi-Mounting Bracket - Unit attaches to the Wall Mount Bracket allowing for the Vent System to be mounted with the Outlet Duct pointed up and includes Assembly Hardware. 

The Dimensions are 8.75" tall, 10.25" wide and 8" deep.

Vent-Sure Vent System Wall Mount Bracket - Unit includes a Motor Mounting Plate, an Output Mounting Plate, a 12" Long x 4" Diameter Output Pipe, and Assembly Hardware

The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln. It ensures that your kiln gets the longest possible life from your elements and electrical components. This is so important that, if you do not have a Vent-Sure installed on your kiln, the pro-rated element warranty is in a different category.

An 8-foot flexible duct is included. We also sell a separate 15-foot flexible duct that you can purchase for longer runs.

See here for more information.

The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln. It ensures that your kiln gets the longest possible life from your elements and electrical components. This is so important that, if you do not have a Vent-Sure installed on your kiln, the pro-rated element warranty is in a different category.

Cord Caution Label - This label goes by the Power Cord and warns about keeping it away from the kiln case

Electrical Hazard Label - This label goes inside the Control Box and warns about electrical shock, etc.

Hinge Caution Label - This label goes on the side of the Hinge and warns about the use of the Locking Push Pin Assembly

16 Gauge Wire, rated to 105C, cut to length specified by customer. 

White 10 Gauge High Temperature Wire, rated to 150C, cut to length specified by customer. 

1/4"-20 x 1/2" Long Zinc Plated Hex Bolt - Unit has a hex head and is used in conjunction with Multi-Mounting Brackets and Polygonal Kiln Stands

1/4"-20 Zinc Plated Hex Nut - Unit is the standard Hex Nut for 1/4" Diameter Bolts & Screws and is used in conjuction with Multi-Mounting Brackets and the Mesh Backing of Hercules and Easy-Load kilns.

1/4" Zinc Plated Split Lock Washer - Unit is the standard Split Lock Washer for 1/4" Diameter Bolts & Screws and is used in conjuction with Multi-Mounting Brackets and the Mesh Backing of Hercules and Easy-Load kilns.