Genesis 2.0 Touch Screen Control Board. You can replace your DynaTrol with this control board. See this link for the features.

Genesis Mini Touch Screen Control Board. used on School-Master and Doll kilns. See this link for the features.

The Spark Genesis control fits the same hole layout as the One-Toch control and is a one-for-one replacement with the same wire connections

Features:

1. Touch-screen technology for the user interface
2. Easy-to-follow screen descriptions
3. Different user-interface levels, which can be set to match the user’s firing knowledge
4. Graphical display of the firing process right at the controller
5. Store up to 30 custom user programs
6. Up to 32 segments per program
7. Ability to make adjustment during a firing such as add time to a current hold and skip segments
8. Built in diagnostics testing
9. End of Firing Alarm
10. Error Codes
11. WiFi enabled for easy software updating
12. Register your Spark on our website or mobile app for remote monitoring of your kiln
13. Use for 1 thermocouple or 1 zone kilns only

Specifications:

1. Circuit Board Size: 4.75” x 2”

2. Opening Size: 4-13/16“x 2-1/16”

3. Mounting Holes: 4-5/8” x 2-5/8”

4. Panel Size: 5"x3"

5. Connection Type: 1/4" Push-on Tab *Insulation

6. Screen Size: 3.2 inch color display

Ground Wire Jumper for Piggybacked Control Panels, such as Easy-Fire and eQuad kilns - Unit is 10 AWG, precut, and comes with two Ring Terminals

Hardware for Attaching Stand Legs with PEM Nuts - Includes eight 1/4" Long #20 (1/4-20) Bolts.

Safety Gloves for Loading and Unloading.

Loop-Out, Terry Cloth Ambidextrous Heat Resistant Gloves.They are useful when pulling out a hot peephole plug, when unloading ware from a warm kiln, and when opening the kiln.

This is made from a K25 brick. Dimensions for the plug portion are 2-3/4" by 1-7/8" by 5-1/2" long and for the top portion are 2-1/2" by 2-1/2" by 4". 

Hex Head #10 2-1/2 Self-Tapping Screw for mounting EL Terminal Blocks, Stainless 400 Series

Snap-in Cable Clamp used to secure 15 and 20 amp Jumper Cords in the Element Cover Box

Snap-in Cable Clamp used to secure the control cord on the Handheld DynaTrol Box

Heyco Snap-in Bushing Large 3/4" - This bushing is used to protect the thermocouple wires on a Jupiter Kiln as they run through the Mounting Brackets on the control panel.

Small Heyco Snap-in Bushing for 3/8" holes

One Gallon of Hi-Temp Cement - This is the same Hi-Temp Brick Cement used to cement Lids and Bases together during production. Comes in four plastic quart jars with screw-on lids.

One Quart of Hi-Temp Cement - This is the same Hi-Temp Brick Cement used to cement Lids and Bases together during production. Comes in a plastic jar with a screw-on lid.

1/2 Pint of Hi-Temp Cement - This is the same Hi-Temp Brick Cement used to cement Lids and Bases together during production. Comes in a plastic jar with a screw-on lid.

High Temperature Wire Sleeving for DiVinci Kiln Jumper Wires - This material is used to provide an additional layer of insulation around the power wires in the Element Connection Box on All DaVinci Kilns.

Rated 316 C, 3/8" ID, Uncoated, silver natural color, Complies with VW-1 flammability requirements.

Cotter Pins for All Hinge Bars - Unit includes a set of two Pins