Hinge Bar for Standard Non-Spring Hinge - Unit is 3/8" in Diameter, 10" in Length, Chrome Plated, and includes two Cotter Pins

240 Volt Infinite Zone Switch - Unit includes a Mounting Nut. This can be used for both 240V and 208V Kilns.

NOTE: Often a switch, when it burns out, exhibits overheating on the switch body at one of the spade electrical connection points. When this occurs, the mating connector on the wire may not give good electrical contact if refused. To reduce the possibility of overheating at this point on the new switch, we recommend replacing the female connector and the wire attached to it. If the switch body looks O.K. then do not replace the female wire connectors.

Troubleshooting An INF Swtich

NOTE CONCERNING 208V SWITCHES

When used on a 208 volt kiln the timing of th heater will be slightly different than when used on a 240 volt kiln. We no longer supply 208 volt switches.

Knob for the INF Infinite Zone Switch

Dynatrol Instruction Label - This label goes underneath the DynaTrol Control Board and provides step-by-step instructions for its use

Hot Instruction Label - This label goes on the side of the Control Panel and provides instructions for how to position the kiln to avoid any heat related accidents or problems

Old Style Power Connection Board with Terminal Bolts - Unit is used on Older Econo J1400, J1800, J23, and J230 Series Kilns at any Voltage and 1 Phase Power

15 Amp Double Receptacle - Unit is used for Older Econo J1400, J1800, and J2300 Series Kilns at any Voltage and Phase Power

15 Amp Single Receptacle - Unit is used for Older Econo J1400, J1800, and J2300 Series Kilns at any Voltage and Phase Power

Jupiter J1809 208 Volt/1 & 3 Phase Heated Section with Large Heavy-Duty Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD1800 & J1800 Series Kilns with 2.5" Brick at this Voltage

Jupiter J1809 220-380 Volt/1 & 3 Phase Heated Section with Large Heavy-Duty Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD1800 & J1800 Series Kilns with 2.5" Brick at this Voltage (Non-U.S. Voltage)

Jupiter J1809 240 Volt/1 & 3 Phase Heated Section with Large Heavy-Duty Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD1800 & J1800 Series Kilns with 2.5" Brick at this Voltage

Jupiter J1809-3 208 Volt/1 & 3 Phase Heated Section with Large Heavy-Duty Elements - The unit is one complete 9" high Section (Ring) wired for use with all J1800-3 & J1800-3 Series Kilns with 3" Brick at this Voltage

Jupiter J1809-3 220-380 Volt/1 & 3 Phase Heated Section with Large Heavy-Duty Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD1800-3 & J1800-3 Series Kilns with 3" Brick at this Voltage (Non-U.S. Voltage)

Jupiter J1809-3 240 Volt/1 & 3 Phase Heated Section with Large Heavy-Duty Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD1800-3 & J1800-3 Series Kilns with 3" Brick at this Voltage

Jupiter J1809-3 208 Volt/1 & 3 Phase Heated Section with Quad Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD1800-3-QD & J1800-3-QD Series Kilns with 3" Brick at this Voltage.

Jupiter J1809-3-QD 220-380 Volt/1 & 3 Phase Heated Section with Quad Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD1800-3-QD & J1800-3-QD Series Kilns with 3" Brick at this Voltage (Non-U.S. Voltage)

Jupiter J1809-3-QD 240 Volt/1 & 3 Phase Heated Section with Quad Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD1800-3-QD & J1800-3-QD Series Kilns with 3" Brick at this Voltage

Jupiter J1809 208 Volt/1 & 3 Phase Heated Section with Quad Elements - Unit is one complete 9" high Section (Ring) wired for use with All JD1800-QD & J1800-QD Series Kilns with 2-1/2" Brick at this Voltage

Jupiter J1809-QD 220-380 Volt/1 & 3 Phase Heated Section with Quad Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD1800-QD & J1800-QD Series Kilns with 2-1/2" Brick at this Voltage (Non-U.S. Voltage)

Jupiter J1809-QD 240 Volt/1 & 3 Phase Heated Section with Quad Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD1800-QD & J1800-QD Series Kilns with 2-1/2" Brick at this Voltage

Jupiter J2309V -3 220-380 Volt/1 & 3 Phase Heated Section with Large Heavy-Duty Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD2300-3 & J2300-3 Series Kilns with 3" Brick at this Voltage (Non-U.S. Voltage) with a "V" designation in the Model Number and with a Serial Number of or succeeding "060104-A" (Made on or after June 1, 2004)

Jupiter J2309V 208 Volt/1 & 3 Phase Heated Section with Large Heavy-Duty Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD2300 & J2300 Series Kilns with 2-1/2" Brick at this Voltage with a "V" designation in the Model Number and with a Serial Number of or succeeding "060104-A" (Made on or after June 1, 2004)

Jupiter J2309V-QD 208 Volt/1 & 3 Phase Heated Section with Quad Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD2300-QD & J2300-QD Series Kilns with 2-1/2" Brick at this Voltage with a "V" designation in the Model Number and with a Serial Number of or succeeding "060104-A" (Made on or after June 1, 2004)

Jupiter J2309V 220-380 Volt/1 & 3 Phase Heated Section with Large Heavy-Duty Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD2300 & J2300 Series Kilns with 2-1/2" Brick at this Voltage (Non-U.S. Voltage) with a "V" designation in the Model Number and with a Serial Number of or succeeding "060104-A" (Made on or after June 1, 2004)

Jupiter J2309V 240 Volt/1 & 3 Phase Heated Section with Large Heavy-Duty Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD2300 & J2300 Series Kilns with 2-1/2" Brick at this Voltage with a "V" designation in the Model Number and with a Serial Number of or succeeding "060104-A" (Made on or after June 1, 2004)

Jupiter J2309V-3 208 Volt/1 & 3 Phase Heated Section with Large Heavy-Duty Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD2300-3 & J2300-3 Series Kilns with 3" Brick at this Voltage with a "V" designation in the Model Number and with a Serial Number of or succeeding "060104-A" (Made on or after June 1, 2004)

Jupiter J2309V-3 240 Volt/1 & 3 Phase Heated Section with Large Heavy-Duty Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD2300-3 & J2300-3 Series Kilns with 3" Brick at this Voltage with a "V" designation in the Model Number and with a Serial Number of or succeeding "060104-A" (Made on or after June 1, 2004)

Jupiter J2309V-3-QD 208 Volt/1 & 3 Phase Heated Section with Quad Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD2300-3-QD & J2300-3-QD Series Kilns with 3" Brick at this Voltage with a "V" designation in the Model Number and with a Serial Number of or succeeding "060104-A" (Made on or after June 1, 2004)

Jupiter J2309V-3-QD 220-380 Volt/1 & 3 Phase Heated Section with Quad Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD2300-3-QD & J2300-3-QD Series Kilns with 3" Brick at this Voltage (Non-U.S. Voltage) with a "V" designation in the Model Number and with a Serial Number of or succeeding "060104-A" (Made on or after June 1, 2004)

Jupiter J2309V-3-QD 240 Volt/1 & 3 Phase Heated Section with Quad Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD2300-3-QD & J2300-3-QD Series Kilns with 3" Brick at this Voltage with a "V" designation in the Model Number and with a Serial Number of or succeeding "060104-A" (Made on or after June 1, 2004)

Jupiter J2309V-QD 220-380 Volt/1 & 3 Phase Heated Section with Quad Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD2300-QD & J2300-QD Series Kilns with 2-1/2" Brick at this Voltage (Non-U.S. Voltage) with a "V" designation in the Model Number and with a Serial Number of or succeeding "060104-A" (Made on or after June 1, 2004)

Jupiter J2309V-QD 240 Volt/1 & 3 Phase Heated Section with Quad Elements - The unit is one complete 9" high Section (Ring) wired for use with All JD2300-QD & J2300-QD Series Kilns with 2-1/2" Brick at this Voltage with a "V" designation in the Model Number and with a Serial Number of or succeeding "060104-A" (Made on or after June 1, 2004)