L-G-PILO/00
$31.00
Red Pilot Light - Unit is used for All Manual Kiln Control Panels
November 21, 2024
|
|---|
SHOP KILN PARTS
L-S-SM1P/00
$1,220.00
Complete School-Master Control Panel with all Components and Wiring up to but not including the Element Connection Terminal Blocks - Unit is used with Three Section School-Master Kilns at 208 Volts or 240 Volts and 1 Phase Power. Includes Genesis Mini control. 
L-S-SM3P/00
$1,220.00
Complete School-Master Control Panel with all Components and Wiring up to but not including the Element Connection Terminal Blocks - Unit is used with Three Section School-Master Kilns at 208 Volts or 240 Volts and 3 Phase Power. Includes Genesis Mini control. 
T-G-MKIT/00
$9.60
Mounting Kit for Type-K 8 Gauge Thermocouples - Kit includes two #6 1-1/2" Screws, six 1/4" high Ceramic Spacers. (note that the photo does not represent this exactly) 
L-G-TRTC/EF
$30.00
Thermocouple Terminal Strip - Unit has Six 3/16" Spade Terminals on each side, comes with a Terminal Strip Marker Board and is used for the Thermocouple Wires on piggybacked Control Panels 
T-G-0000/00
$7.00
Type-K Thermocouple Lead Wire - Unit is shielded and is used with All Type-K Thermocouples 
T-G-S000/00
$6.50
Type-S Thermocouple Lead Wire - Unit is shielded and is used with All Type-S Thermocouples 
T-G-LB18/HT
$30.00
Type-K Thermocouple Lead Wire - Unit is precut and fitted with the appropriate terminal ends to run from the Thermocouple to the One-Touch on All Liberty-Belle Kilns 
T-G-HS1C/HT
$21.50
Type-K Thermocouple Lead Wire - Unit is precut, fitted with the appropriate terminal ends, and labeled to run from the Thermocouple Terminal Strip to the One-Touch on All School-Master Kilns 
T-G-E800/EL
$23.75
Type-K 8 Gauge Thermocouple (Exposed) with Element ONLY - no Terminal Block - Metal element is 6" Long with a 4" long ceramic insulator tube that is 1/2" diameter. The negative wire is marked with red. 
T-G-E807/00
$58.00
Type-K 8 Gauge Thermocouple (Exposed) with Ceramic Terminal Block - Unit is 6-1/2" Long x 1/2" Diameter
T-G-E800/00
$50.00
Type-K 8 Gauge Thermocouple (Exposed) with Ceramic Terminal Block - Ceramic tube is 4" Long x 1/2" Diameter. 
T-G-E23M/05
$105.00
Type-K Industrial Grade Pyrocil Sheathed Thermocouples with Ceramic Terminal Block - Unit is 5" Long x 1/4" Diameter. Used on DaVinci, Jupiter, Easy-Fire and other kilns with 2-1/2" or 3" brick walls.
T-G-E23M/06
$105.00
Type-K Industrial Grade Pyrocil Sheathed Thermocouples with Ceramic Terminal Block - Unit is 6-1/2" Long x 1/4" Diameter. Used on Hercules and Easy-Load kilns where wall thickness is 5". 
T-G-SXXX/00
$410.00
Type S Platinum Thermocouple with Alumina Protection Tube and Terminal Block - Unit is 120 mm (4-3/4") Long x 1/4" Diameter. Used on JH Series kilns (as standard), optional on Easy-Fire, Jupiter, DaVinci, eFL Series, Easy-Fire XT, Bell-Lift, Doll with DynaTrol) 
T-G-S180/08
$435.00
Type S Platinum Thermocouple with Alumina Protection Tube and Terminal Block - Unit is 180 mm (7") Long x 1/4" Diameter. Used on Hercules and Easy-Load kilns where wall thickness is 5". 
M-V-CNTL/PT
$195.00
The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis). To see more details go the the Accessory Page here. |
