
Thermocouple Terminal Strip - Unit has Six 3/16" Spade Terminals on each side, comes with a Terminal Strip Marker Board and is used for the Thermocouple Wires on piggybacked Control Panels
Thermocouple Terminal Strip - Unit has Six 3/16" Spade Terminals on each side, comes with a Terminal Strip Marker Board and is used for the Thermocouple Wires on piggybacked Control Panels
Type-K Industrial Grade Pyrocil Sheathed Thermocouples with Ceramic Terminal Block - Unit is 5" Long x 1/4" Diameter. Used on DaVinci, Jupiter, Easy-Fire and other kilns with 2-1/2" or 3" brick walls.
Type-K Industrial Grade Pyrocil Sheathed Thermocouples with Ceramic Terminal Block - Unit is 6-1/2" Long x 1/4" Diameter. Used on Hercules and Easy-Load kilns where wall thickness is 5".
Type-K 8 Gauge Thermocouple (Exposed) with Ceramic Terminal Block - Ceramic tube is 4" Long x 1/2" Diameter.
Type-K 8 Gauge Thermocouple (Exposed) with Element ONLY - no Terminal Block - Metal element is 6" Long with a 4" long ceramic insulator tube that is 1/2" diameter. The negative wire is marked with red.
Type-K 8 Gauge Thermocouple (Exposed) with Ceramic Terminal Block - Unit is 6-1/2" Long x 1/2" Diameter
Mounting Kit for Type-K 8 Gauge Thermocouples - Kit includes two #6 1-1/2" Screws, six 1/4" high Ceramic Spacers. (note that the photo does not represent this exactly)
Mounting Kit for Long Type K Thermocouples - Kit includes two #8 3" Screws, six 1/2" high Ceramic Spacers, and is used for all Pyrocil Type K and all Long 8 Gauge Type K (Exposed) Thermocouples
Mullite Thermocouple Protection Tube - Unit is 5" Long x 1" Diameter with a stepped head for use with All Standard Length Type-K 8 Ga. Thermocouples. NOTE: This is the newer type open end tube which was put in service with new kilns starting in September 2020.
Type S Platinum Thermocouple with Alumina Protection Tube and Terminal Block - Unit is 120 mm (4-3/4") Long x 1/4" Diameter.
Used on JH Series kilns (as standard), optional on Easy-Fire, Jupiter, DaVinci, eFL Series, Easy-Fire XT, Bell-Lift, Doll with DynaTrol)
Type S Platinum Thermocouple with Alumina Protection Tube and Terminal Block - Unit is 160 mm (6-5/16") Long x 1/4" Diameter. Used on Hercules and Easy-Load kilns where wall thickness is 5".
Used on Hercules and Easy-Load kilns (with 5" of insulation)
Mullite Thermocouple Protection Tube - Unit is 7" Long x 1" Diameter with a stepped head for use with all Longer Length Type-K 8 Ga. Thermocouples. NOTE: This is the newer type open end tube which was put into service for new kilns starting in November 2020.