Pottery Kiln Wired-Panels
Automatic Control Panel with five 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).
The stand is not included (order it here).
All panels this size are directly wired and do not include a power cord.
This is used with all Five CIrcuit DaVinci X2845, XB2845, X3245, XB3245, T2345, TB2345, T3445, and TB3445 Kilns at 208 Volts or 240 Volts and 1 Phase Power.
Automatic Control Panel with five 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).
The stand is not included (order it here).
All panels this size are directly wired and do not include a power cord.
This is used with all Five CIrcuit DaVinci X2845, XB2845, X3245, XB3245, T2345, TB2345, T3445, and TB3445 Kilns at 208 Volts or 240 Volts and 3 Phase Power.
Automatic Control Panel with four 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).
The stand is not included (order it here).
All panels this size are directly wired and do not include a power cord.
This is used with all Four CIrcuit DaVinci X2836, XB2836, X3236, XB3236, T2336, TB2336, T3436, and TB3436 Kilns at 208 Volts or 240 Volts and 1 Phase Power.
Automatic Control Panel with four 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).
The stand is not included (order it here).
All panels this size are directly wired and do not include a power cord.
This is used with all Four CIrcuit DaVinci X2836, XB2836, X3236, XB3236, T2336, TB2336, T3436, and TB3436 Kilns at 208 Volts or 240 Volts and 3 Phase Power.
Automatic Control Panel with six 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).
The stand is not included (order it here).
All panels this size are directly wired and do not include a power cord.
This is used with all Six CIrcuit DaVinci X2845-PB, XB2845-PB, X3245-PB, XB3245-PB, T2345-PB, TB2345-PB, T3445-PB, TB3445, and some special pull-apart kilns at 208 Volts or 240 Volts and 1 Phase Power.
Automatic Control Panel with six 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).
The stand is not included (order it here).
All panels this size are directly wired and do not include a power cord.
This is used with all Six CIrcuit DaVinci X2845-PB, XB2845-PB, X3245-PB, XB3245-PB, T2345-PB, TB2345-PB, T3445-PB, TB3445, and some special pull-apart kilns at 208 Volts or 240 Volts and 3 Phase Power.
Automatic Control Panel with three 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).
The stand is not included (order it here).
All panels this size are directly wired and do not include a power cord.
This is used with all Three CIrcuit DaVinci X2827, XB2827, X3227, XB3227, T2327, TB2327, T3427, and TB3427 Kilns at 208 Volts or 240 Volts and 1 Phase Power.
Automatic Control Panel with three 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).
The stand is not included (order it here).
All panels this size are directly wired and do not include a power cord.
This is used with all Three CIrcuit DaVinci X2827, XB2827, X3227, XB3227, T2327, TB2327, T3427, and TB3427 Kilns at 208 Volts or 240 Volts and 3 Phase Power.
Automatic Control Panel with two 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).
The stand is not included (order it here).
All panels this size are directly wired and do not include a power cord.
This is used with all Two CIrcuit DaVinci XB2818, XB3218, XB3218, TB2318, and TB3418 Kilns at 208 Volts or 240 Volts and 1 Phase Power.
Automatic Control Panel with two 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).
The stand is not included (order it here).
All panels this size are directly wired and do not include a power cord.
This is used with all Two CIrcuit DaVinci XB2818, XB3218, XB3218, TB2318, and TB3418 Kilns at 208 Volts or 240 Volts and 3 Phase Power.
This panel houses the control, electrical components, thermocouple wires, and all power wires up to the terminal strip. It does not include the power wires running from the terminal strip to the ceramic element terminal blocks. Note: Our thermocouple wiring design has been updated to eliminate the terminal strip on the element box. The wiring now connects directly from the control to the thermocouples. See the video below for details. This panel is designed for DL11-D and DLH11-D Kilns, operating at 208 to 240 Volts, 1 Phase power, and under 20 Amps. Includes Genesis Mini control.
This panel houses the control, electrical components, thermocouple wires, and all power wires up to the terminal strip. It does not include the power wires running from the terminal strip to the ceramic element terminal blocks. Note: Our thermocouple wiring design has been updated to eliminate the terminal strip on the element box. The wiring now connects directly from the control to the thermocouples. See the video below for details. This panel is designed for DL11-D and DLH11-D Kilns, operating at 120 Volts, 1 Phase power, and under 20 Amps. Includes Genesis Mini control.
This panel houses the control, electrical components, thermocouple wires, and all power wires up to the terminal strip. It does not include the power wires running from the terminal strip to the ceramic element terminal blocks. Note: Our thermocouple wiring design has been updated to eliminate the terminal strip on the element box. The wiring now connects directly from the control to the thermocouples. See the video below for details. This panel is designed for three-section Easy-Fire kilns operating on 208 or 240 volts, 1-phase power. Please specify Genesis or DynaTrol control (no cost difference).
This panel houses the control, electrical components, thermocouple wires, and all power wires up to the terminal strip. It does not include the power wires running from the terminal strip to the ceramic element terminal blocks. Note: Our thermocouple wiring design has been updated to eliminate the terminal strip on the element box. The wiring now connects directly from the control to the thermocouples. See the video below for details. This panel is designed for three-section Easy-Fire kilns operating on 208 or 240-volt, 3-phase power. Please specify Genesis or DynaTrol control (no cost difference).
This panel houses the control, electrical components, thermocouple wires, and all power wires up to the terminal strip. It does not include the power wires running from the terminal strip to the ceramic element terminal blocks. Note: Our thermocouple wiring design has been updated to eliminate the terminal strip on the element box. The wiring now connects directly from the control to the thermocouples. See the video below for details. This panel is designed for two-section Easy-Fire kilns operating on 208 or 240-volt, 1-phase power. Please specify Genesis or DynaTrol control (no cost difference).
This panel houses the control, electrical components, thermocouple wires, and all power wires up to the terminal strip. It does not include the power wires running from the terminal strip to the ceramic element terminal blocks. Note: Our thermocouple wiring design has been updated to eliminate the terminal strip on the element box. The wiring now connects directly from the control to the thermocouples. See the video below for details. This panel is designed for two-section Easy-Fire kilns operating on 208 or 240-volt, 3-phase power. Please specify Genesis or DynaTrol control (no cost difference).
This panel houses the control, electrical components, thermocouple wires, and all power wires up to the terminal strip. It does not include the power wires running from the terminal strip to the ceramic element terminal blocks. Note: Our thermocouple wiring design has been updated to eliminate the terminal strip on the element box. The wiring now connects directly from the control to the thermocouples. See the video below for details. This panel is designed for Three-Section eQuad-Pro kilns, eFL1626 kilns, eFL2026 kilns, and eFL2626 kilns operating on 208 or 240-volt, 1-phase power. Please specify Genesis or DynaTrol control (no cost difference).
This panel houses the control, electrical components, thermocouple wires, and all power wires up to the terminal strip. It does not include the power wires running from the terminal strip to the ceramic element terminal blocks. Note: Our thermocouple wiring design has been updated to eliminate the terminal strip on the element box. The wiring now connects directly from the control to the thermocouples. See the video below for details. This panel is designed for Three-Section eQuad-Pro kilns, eFL1626 kilns, eFL2026 kilns, and eFL2626 kilns operating on 208 or 240-volt, 3-phase power. Please specify Genesis or DynaTrol control (no cost difference).
This panel houses the control, electrical components, thermocouple wires, and all power wires up to the terminal strip. It does not include the power wires running from the terminal strip to the ceramic element terminal blocks. Note: Our thermocouple wiring design has been updated to eliminate the terminal strip on the element box. The wiring now connects directly from the control to the thermocouples. See the video below for details. This panel is designed for Four-Section eQuad-Pro kilns, eFL2635 Kilns, and eFL2836 kilns operating on 208 or 240-volt, 1-phase power. Please specify Genesis or DynaTrol control (no cost difference).
This panel houses the control, electrical components, thermocouple wires, and all power wires up to the terminal strip. It does not include the power wires running from the terminal strip to the ceramic element terminal blocks. Note: Our thermocouple wiring design has been updated to eliminate the terminal strip on the element box. The wiring now connects directly from the control to the thermocouples. See the video below for details. This panel is designed for Four-Section eQuad-Pro kilns, eFL2635 kilns, and eFL2836 kilns operating on 208 or 240-volt, 3-phase power. Please specify Genesis or DynaTrol control (no cost difference).
Automatic Control Panel with five 20 Amp Plug-In Circuits and with Branch Fusing. The unit includes a control, relays, power terminal block, transformer, on/off switch, control fuse, fuse blocks, fuses, female receptacles, and all internal wiring. There is no power cord. The unit is used with JD236, JD236-PB, JD245, JD2936, JD2936-PB, JD2945, X2336-D, & X2345-D Kilns at 208 Volts or 240 Volts and 1 Phase power.
Specify a Genesis or a DynaTrol when ordering - there is no difference in cost.
Automatic Control Panel with five 20 Amp Plug-In Circuits and with Branch Fusing. The unit includes a control, relays, power terminal block, transformer, on/off switch, control fuse, fuse blocks, fuses, female receptacles, and all internal wiring. There is no power cord. The unit is used with JD236, JD236-PB, JD245, JD2936, JD2936-PB, JD2945, X2336-D, & X2345-D Kilns at 208 Volts or 240 Volts and 3 Phase power.
Specify a Genesis or a DynaTrol when ordering - there is no difference in cost.
Automatic Control Panel with four 20 Amp Plug-In Circuits and with Branch Fusing. The unit includes a control, relays, power terminal block, transformer, on/off switch, control fuse, fuse blocks, fuses, female receptacles, and all internal wiring. There is no power cord. The unit is used with JD236, JD2936, & X2336-D Kilns at 208 Volts or 240 Volts and 1 Phase power.
Specify a Genesis or a DynaTrol when ordering - there is no difference in cost.
Automatic Control Panel with four 20 Amp Plug-In Circuits and with Branch Fusing. The unit includes a control, relays, power terminal block, transformer, on/off switch, control fuse, fuse blocks, fuses, female receptacles, and all internal wiring. There is no power cord. The unit is used with JD236, JD2936, & X2336-D Kilns at 208 Volts or 240 Volts and 3 Phase power.
Specify a Genesis or a DynaTrol when ordering - there is no difference in cost.
Automatic Control Panel with six 20 Amp Plug-In Circuits and with Branch Fusing. The unit includes a control, relays, power terminal block, transformer, on/off switch, control fuse, fuse blocks, fuses, female receptacles, and all internal wiring. There is no power cord. The unit is used with five-section kilns with powered bottoms or special six-section kilns at 208 Volts or 240 Volts and 1 Phase power.
Specify a Genesis or a DynaTrol when ordering - there is no difference in cost.
(Note: the photo only shows 5 circuits).
Automatic Control Panel with six 20 Amp Plug-In Circuits and with Branch Fusing. The unit includes a control, relays, power terminal block, transformer, on/off switch, control fuse, fuse blocks, fuses, female receptacles, and all internal wiring. There is no power cord. The unit is used with five-section kilns with powered bottoms or special six-section kilns at 208 Volts or 240 Volts and 3 Phase power.
Specify a Genesis or a DynaTrol when ordering - there is no difference in cost.
(Note: the photo only shows 5 circuits).
Automatic Control Panel with three 20 Amp Plug-In Circuits and with Branch Fusing. The unit includes a control, relays, power terminal block, transformer, on/off switch, control fuse, fuse blocks, fuses, female receptacles, and all internal wiring. There is no power cord. The unit is used with JD2918, JD2918-PB, JD2927, X1818-D, X1827-D, & X2327-D Kilns at 208 Volts or 240 Volts and 1 Phase power
Automatic Control Panel with three 20 Amp Plug-In Circuits and with Branch Fusing -The unit includes a control, relays, power terminal block, transformer, on/off switch, control fuse, fuse blocks, fuses, female receptacles, and all internal wiring. There is no power cord. The unit is used with JD2918, JD2918-PB, JD2927, X1818-D, X1827-D, & X2327-D Kilns at 208 Volts or 240 Volts and 3-phase power.
Specify a Genesis or a DynaTrol when ordering - there is no difference in cost.
Automatic Control Panel with three 20 Amp Plug-In Circuits and No Branch Fusing - The unit includes a control, relays, transformer, on/off switch, control fuse, female receptacles, power cord, and all internal wiring. - The unit is used with JD18, JD23, JD23-PB, JD18X, & JD230 Kilns at 208 Volts or 240 Volts, 1 Phase power, and under 50 Amps.
Specify a Genesis or a DynaTrol when ordering - there is no difference in cost.
Automatic Control Panel with three 20 Amp Plug-In Circuits and No Branch Fusing - The unit includes a control, relays, transformer, on/off switch, control fuse, female receptacles, power cord, and all internal wiring. The unit is used with JD18, JD23, JD23-PB, JD18X, & JD230 Kilns at 208 Volts or 240 Volts, 3 Phase power, and under 50 Amps.
Specify a Genesis or a DynaTrol when ordering - there is no difference in cost.
This panel houses the control, electrical components, thermocouple wires, and all power wires up to the terminal strip. It does not include the power wires running from the terminal strip to the ceramic element terminal blocks. Note: Our thermocouple wiring design has been updated to eliminate the terminal strip on the element box. The wiring now connects directly from the control to the thermocouples. See the video below for details. This panel is designed for Three-Section School-Master Kilns operating on 208 or 240-volt, 1-phase power. Includes Genesis Mini control.
This panel houses the control, electrical components, thermocouple wires, and all power wires up to the terminal strip. It does not include the power wires running from the terminal strip to the ceramic element terminal blocks. Note: Our thermocouple wiring design has been updated to eliminate the terminal strip on the element box. The wiring now connects directly from the control to the thermocouples. See the video below for details. This panel is designed for Three-Section School-Master Kilns operating on 208 or 240-volt, 3-phase power. Includes Genesis Mini control.
|
