Easy-Fire e28T-3 220 Volt/3 Phase Heated Section - Unit is one complete 9" high Section (Ring) wired for use with All e28T-3 Kilns with 3" Brick at this Voltage and Phase (Non-U.S. Voltage)

Easy-Fire e28T-3 240 Volt/1 Phase Heated Section - Unit is one complete 9" high Section (Ring) wired for use with All e28T-3 Kilns with 3" Brick at this Voltage and Phase

Easy-Fire e28T-3 240 Volt/3 Phase Heated Section - Unit is one complete 9" high Section (Ring) wired for use with All e28T-3 Kilns with 3" Brick at this Voltage and Phase

Easy-Fire e28T-3-QD 208V 1 Phase Heated Section w/Quad Elements- Unit is one complete 9" high Section (Ring) wired for use with All e28T-3-QD Kilns with 2-1/2" Brick at this Voltage and Phase.

Easy-Fire e28T-3-QD 208V 3 Phase Heated Section w/Quad Elements- Unit is one complete 9" high Section (Ring) wired for use with All e28T-3-QD Kilns with 2-1/2" Brick at this Voltage and Phase.

Easy-Fire e28T-3-QD 220V 1 Phase Heated Section w/Quad Elements- Unit is one complete 9" high Section (Ring) wired for use with All e28T-3-QD Kilns with 2-1/2" Brick at this Voltage and Phase (Non U.S. Voltage).

Easy-Fire e28T-3-QD 220V 3 Phase Heated Section w/Quad Elements- Unit is one complete 9" high Section (Ring) wired for use with All e28T-3-QD Kilns with 2-1/2" Brick at this Voltage and Phase (Non U.S. Voltage).

Easy-Fire e28T-3-QD 240V 1 Phase Heated Section w/Quad Elements- Unit is one complete 9" high Section (Ring) wired for use with All e28T-3-QD Kilns with 2-1/2" Brick at this Voltage and Phase.

Easy-Fire e28T-3-QD 240V 3 Phase Heated Section w/Quad Elements- Unit is one complete 9" high Section (Ring) wired for use with All e28T-3-QD Kilns with 2-1/2" Brick at this Voltage and Phase.

Component Plate for Easy-Fire Kilns - Unit is aluminized steel, comes with Mounting Hardware, and is used with All Easy-Fire Kilns

Complete Easy-Fire Control Panel. The unit includes a control, transformer, on/off switch, control fuse, power cord, thermocouple wires to the thermocouple terminal, and all wiring used up to but not including the element connection terminal Blocks - The unit is used with Three Section Easy-Fire Kilns at 208 Volts or 240 Volts and 1 Phase Power. Also used on the eFL1626 240V and the eFL1626- 208-X-1P 208V kilns.

Please specify Genesis or DynaTrol control (no cost difference).

Complete Easy-Fire Control Panel. The unit includes a control, transformer, on/off switch, control fuse, power cord, thermocouple wires to the thermocouple terminal, and all wiring used up to but not including the element connection terminal Blocks - The unit is used with Three Section Easy-Fire Kilns at 208 Volts or 240 Volts and 3 Phase Power. Also used on the eFL1626, eFL2026, and eFL2626

Please specify Genesis or DynaTrol control (no cost difference).

Complete Easy-Fire Control Panel with Automatic Control Panel - The unit includes control, transformer, on/off switch, control fuse, power cord, thermocouple wires to the thermocouple terminal, and all wiring used up to but not including the element connection terminal Blocks - The unit is used with Two Section Easy-Fire Kilns at 208 Volts or 240 Volts and 1 Phase Power. They are also used on the eFL1616 and the e23S-JH.

Please specify Genesis or DynaTrol control (no cost difference).

Complete Easy-Fire Control Panel. The unit includes a control, transformer, on/off switch, control fuse, power cord, thermocouple wires to the thermocouple terminal, and all wiring used up to but not including the element connection terminal Blocks - The unit is used with Two Section Easy-Fire Kilns at 208 Volts or 240 Volts and 3 Phase Power. Also used on the eFL1616 and the e23S-JH.

Please specify Genesis or DynaTrol control (no cost difference).

Control Top Box for Easy-Fire Kilns - Unit has a corrosion resistant powder coated finish, comes with Mounting Hardware, and is used with All Easy-Fire Kilns

Element Cover Box for 3-section "M" model Easy-Fire Kilns (22.5" high) - Unit has a corrosion-resistant powder-coated finish and comes with mounting hardware, bushings, information stickers, terminal boards for thermocouples, and power wires.

Element Cover Box for 3-section "T" model Easy-Fire Kilns - Unit has a corrosion-resistant powder-coated finish and comes with mounting hardware, bushings, information stickers, terminal boards for thermocouples, and power wires.

Element Cover Box for 2-section "S" Easy-Fire Kilns - Unit has a corrosion-resistant powder-coated finish and comes with mounting hardware, bushings, information stickers, terminal boards for thermocouples, and power wires.

Insulation Blanket for Easy-Fire Kilns - Unit is prepunched, fits into the inside of the Element Cover Box, and is used with All Easy-Fire Kilns

In a 3-ring binder. For kilns with the Genesis control (DynaTrol instructions can be downloaded).

You can download a free PDF here.  Most diagrams are included but, if yours is not there, you can contact  service@hotkilns.com to get your wiring diagram (you will need your exact model number and serial number).

2 Pole Power Terminal Block - Unit is used on All Easy-Fire Kilns at any Voltage and 1 Phase Power. These are also used for 380-415/3 Phase Wye kilns that have a neutral by using two of them to create four connections.

2 Pole Power Terminal Block - Unit is used on All Easy-Fire Kilns at any Voltage and 3 Phase Power

Element Connection Sidebrick for all Easy-Fire XT Square kilns with Element Holders - Unit includes one 3" Brick with two rows of Element Holders (Two 1-3/8" Holders per Row)

Side brick for Easy-Fire XT Square Kilns without Element Channels. The unit includes one 3" Brick with two grooves but no Element Channels

Side brick for e2318-XT, e2327-XT, e2818-XT, and e2827-XT Kilns with Element Channels - Unit includes one 3" Brick with two rows of Element Channels (One 4-1/4" Channel per Row)

Backing Plate for 2nd Generation Easy-Lift Hinges - Unit is used between the firebrick and stainless steel wrap where the Ring Mount will be secured to the kiln

Ceramic Handle for 2nd Generation Easy-Lift Hinges - The unit is 1" in Diameter, 7-15/16" in Length, and Includes Mounting Hardware

Acorn Nuts: M-A-ACRN/00 - (two included)
Threaded Rod: M-A-TROD/00 - (one included)

Stainless Steel Front Plate for 2nd Generation Easy-Lift Hinges - Unit secures the Lid Mount to the Kiln Top and includes Mounting Hardware

Hinge Bar for 2nd Generation Easy-Lift Hinges - Unit is 5/8" in Diameter, 9-1/4" in Length, Stainless Steel, and includes two Cotter Pins

Left Spring for 10-Sided Kiln 2nd Generation Easy-Lift Hinges

Left Spring for 12-Sided Kiln 2nd Generation Easy-Lift Hinges.

(Note the thickness of the spring wire is .316" vs .285" diameter for the 10 sided kiln hinge spring)

Lid Latch Set for 2nd Generation Easy-Lift Hinges - Unit includes the Clasp, Hook, and Mounting Hardware

Lid Mount for 10-Sided Kiln 2nd Generation Easy-Lift Hinges - Unit includes Mounting Hardware

Lid Mount for 12-Sided Kiln 2nd Generation Easy-Lift Hinges - Unit includes Mounting Hardware.

Locking Push Pin Assembly for 2nd Generation Easy-Lift Hinges - Unit includes Mounting Hardware and is used with All Easy-Lift Spring Hinges to ensure that the lid does not accidently close

Right Spring for 10-Sided Kiln 2nd Generation Easy-Lift Hinges

(Note the thickness of the spring wire is .285" vs .316" diameter for the 12 sided kiln hinge spring)

Right Spring for 12-Sided Kiln 2nd Generation Easy-Lift Hinges

(Note the thickness of the spring wire is .316" vs .285" diameter for the 10 sided kiln hinge spring)

Ring Mount for 10-Sided Kiln 2nd Generation Easy-Lift Hinges - Unit includes Mounting Hardware

Ring Mount for 12-Sided Kiln 2nd Generation Easy-Lift Hinges - Unit includes Mounting Hardware

In a 3-ring binder. For kilns with the Genesis control (DynaTrol instructions can be downloaded).

You need to specify which control you have and your model number and serial number so we can provide the proper wiring diagram and control instructions.

You can download the free PDF here. This has both the DynaTrol and Genesis instructions. You can control service@hotkilns.com to get your wiring diagram. You will need your exact model number and wiring diagram.

Video Demonstration

This is a complete kit for upgrading the arch on an older eFL kiln. The eFL Arch Kit allows you to rebuild the arch.

INCLUDED:    
• Corner bricks (18)    
• Corner brick ½” shims (2)    
• Arch brick (18)    
• Arch brick ½” shims (2)    
• 9/64” drill bit    
• Sanding block    
• #10 teks screws (4)    
• eFL band C-Bracket to retain band after loosening (2)    
• ¼”x ¾” long bolts, nuts, washers (10 each)    
• 5/16” x 3.5” long bolts for arch clamp brackets (7) – dependent on model    
• Jack support box    
• Jacks (2)    
• Arch support jig

WHAT YOU’LL NEED (see image below):    
• ½” hex-wrench    
• ½” hex-socket and socket wrench    
• 7/16” hex-wrench    
• 7/16” hex-socket and socket wrench    
• ¼” drill bit for drilling metal

In a 3-ring binder. For kilns with the Genesis control (DynaTrol instructions can be downloaded).

You can download a free PDF here.  This has both the DynaTrol and Genesis instructions. Most diagrams are included but, if yours is not there, you can contact  service@hotkilns.com to get your wiring diagram (you will need your exact model number and serial number).