Side brick for Easy-Fire e18S & e18T, J18, J18X, JD18, JD18X, and Liberty-Belle LB18 Kilns. 2-1/2" Brick without Element Channels- The unit includes one 2-1/2" Brick with one groove but no Element Channels

Side brick for Easy-Fire e18S, e18T, Jupiter J18, J18X, JD18, and JD18X, and Liberty-Belle LB18 Kilns. 2-1/2" Brick with Element Channels- Unit includes one 2-1/2" Brick with a full line of Element Channels (One 3" & One 3-15/16" Channels)

Side brick for all Easy-Fire e18S-3 & e18T-3 and Jupiter J18-3, JD18X-3, J18-3, J18X-3 and Liberty-Belle LB18-3 kiln. 3" Brick Kilns without Element Channels- The unit includes one 3" Brick with one groove but no Element Channels

Side brick for Quad e18S-3, e18T-3, J18-3, JD18-3, J18X-3, JD18X-3, and LB18-3 Kilns with 3" thick brick, Brick without Element Channels- Unit includes one 3" Brick with two rows of element grooves for the separate element Channels.

Side brick for Easy-Fire e18S-3 & e18T-3, and Liberty-Belle LB18-3 Kilns. 3" Brick with Element Holders - Unit includes one 3" Brick with a full line of Element Holders (One 3" & One 3.5" Holder)

Side brick for Quad e18S, e18T, JD18, and JD18X 2-1/2" Brick Kilns with Element Channels. For the element connection side. Unit includes one 2-1/2" Brick with two rows of element grooves with five Element Channels (one 3" Channel, one 3.5" Channel, two 2.5" Channels, and one 1" Channel)

Side brick for Quad e18S, e18T, JD18, and JD18X 2-1/2" Brick Kilns with Element Channels. Unit includes one 2-1/2" Brick with two rows of element grooves with four Element Channels (four 2.5" and two 1" Channels). This is made for the side brick where the element drop downs and returns to the bottom row of channels.

Side brick for Quad e18S, e18T, J18, JD18, J18X, JD18X and Liberty-Belle LB18. 2-1/2" Brick Kilns with Element Channels - Unit includes one 2-1/2" Brick with two rows of element grooves with four Element Channels (Two 3" & Two 3-15/16" Holder)

Side brick for Quad e18S-3, e18T-3, J18-3, and JD18-3 3" Brick Kilns with Element Channels.  Unit includes one 3" Brick with two rows of element grooves with five Element Channels (one 3" Channel, one 3.5" Channel, two 2.5" Channels, and one 1" Channel)

Side brick for Quad e18S-3, e18M-3, e18T-3, JD18-3, and JD18X-3 3" Brick Kilns with Element Channels. Unit includes one 3" Brick with two rows of element grooves with four Element Channels (four 2.5" and two 1" Channels). This is made for the side brick where the element drop downs and returns to the bottom row of channels.

Side brick for Quad e18S-3, e18T-3, J18-3, JD18-3, J18X-3, JD18X-3, and LB18-3. 3" Brick Kilns with Element Channels- The unit includes one 3" Brick with two rows of element grooves with four Element Channels(Two 3" & Two 3.5" Holders)

Bottom Firebrick Slab for e23S-JH & JD230-JH Kilns - Unit includes a cemented 2-1/2" K2500 Brick Slab wrapped in the Stainless Steel Band. 

Bottom Firebrick Slab for All Easy-Fire e23S & e23T Kilns, All SM23T Kilns, All Dura-Fire D23S & D23T Kilns, and All Jupiter and Econo JD2300, J2300, & K2300 Series Kilns - Unit includes a cemented 2-1/2" Brick Slab wrapped in the Stainless Steel Band. 

Bottom Firebrick Slab for All Easy-Fire e23S-3 & e23T-3 Kilns, All SM23T-3 Kilns, All Dura-Fire D23S-3 & D23T-3 Kilns, and All Jupiter JD2300-3 & J2300-3 Series Kilns - Unit includes a cemented 3" Brick Slab wrapped in the Stainless Steel Band

Bottom Firebrick Slab for JD2927-JH Kilns - Unit includes a cemented 2-1/2" K2500 Brick Slab wrapped in the Stainless Steel Band. 

Bottom Firebrick Slab for All Jupiter and Econo JD2900 & J2900 Series Kilns - Unit includes a cemented 2-1/2" Brick Slab wrapped in the Stainless Steel Band

Bottom Firebrick Slab for All Easy-Fire e28S-3 & e28T-3 Kilns, All SM28T-3 Kilns, All Dura-Fire D28S-3 & D28T-3 Kilns, eQuad-Pro eQ2827-3, eQ2836-3, and All Jupiter JD2900-3 & J2900-3 Series Kilns - Unit includes a cemented 3" Brick Slab wrapped in the Stainless Steel Band. 

Bottom Firebrick Slab for All Econo J1400 & K1400 Series Kilns - Unit includes a cemented 2-1/2" Brick Slab wrapped in the Stainless Steel Band

Bottom Firebrick Slab for J18-JH Kilns - Unit includes a cemented 3" K2500 Brick Slab wrapped in the Stainless Steel Band. 

Bottom Firebrick Slab for All Easy-Fire e18S & e18T Kilns, All Liberty-Belle LB18 Kilns, All Dura-Fire D18S & D18T Kilns, and All Jupiter and Econo JD1800, J1800, & K1800 Series Kilns - Unit includes a cemented 2-1/2" Brick Slab wrapped in the Stainless Steel Band. 

Bottom Firebrick Slab for All Easy-Fire e18S-3 & e18T-3 Kilns, All Liberty-Belle LB18-3 Kilns, All Dura-Fire D18S-3 & D18T-3 Kilns, and All Jupiter JD1800-3 & J1800-3 Series Kilns - Unit includes a cemented 3" Brick Slab wrapped in the Stainless Steel Band

One gallon of K23 firebrick dust for use in repair purposes. Comes in four plastic quart jars.

One quart of K23 firebrick dust for use in repair purposes. Comes in a plastic jar with a screw-on lid.

One half pint of K23 firebrick dust for use in repair purposes. Comes in a plastic jar with a screw-on lid.

When you need to convert your kiln from Type K to Type S thermocouples, this plug is cemented into the larger hole we use for our Type K thermocouples with protection tubes.

• Video tutorial 

Includes the following

½ pint Primer Mix
½ pint Brick Dust
½ pint Brick Facing
½ pint Brick Cement
1 brick
Small Plastic Spatula
Small brush
1 rubber glove
1 small sponge

Instructions

Corner Brick for e2818-XT & e2827-XT Kilns. There are four pieces required per kiln section. They have two element groove cut-outs.

Element Connection Sidebrick for All DaVinci Kilns with Element Holders - The unit includes one 3" Brick with three rows of Element Holders (One 1-3/8" Holders per Row or one 3" Holder per row for model that have offset element connections)

Sidebrick for All DaVinci Kilns with Element Holders - Unit includes one 3" Brick with three rows of Element Holders (One 4-1/4" Holder per Row)

Sidebrick for All DaVinci Kilns without Element Holders - Unit includes one 3" Brick with three grooves but no Element Holders

Element Connection Sidebrick for All DaVinci Kilns with Element Holders - Unit includes one 3" Brick with four rows of Element Holders (Two 1-3/8" Holders per Row). For Quad element options. Also used on e2318-XT, e2327-XT, e2818-XT & e2827-XT kilns that have Quad elements.

Sidebrick for All DaVinci Kilns with Element Holders - Unit includes one 3" Brick with four rows of Element Holders (One 4-1/4" Holder per Row). For DaVinci kilns with Quad element option. Also used on e2318-XT, e2327-XT, e2818-XT & e2827-XT kilns that have Quad elements.

Sidebrick for All DaVinci Kilns without Element Holders - Unit includes one 3" Brick with four grooves but no Element Holders. For Quad element options. Also used on e2318-XT, e2327-XT, e2818-XT & e2827-XT kilns that have Quad elements.

Bottom Firebrick Slab for All Doll DL11 & DLH11 Kilns - Unit includes a cemented 2-1/2" Brick Slab wrapped in the Stainless Steel Band

Element Connection Sidebrick Section for All Doll DL11 & DLH11 Kilns with Element Holders - Unit includes matching Top and Bottom 2-1/2" Bricks with three rows of Element Holders (One 2-1/2" Holders, Two 1" Holder) 

Side brick Section for All Doll DL11 & DLH11 Kilns with Element Holders - The unit includes matching Top and Bottom 2-1/2" Bricks with three rows of Element Holders (Two 3" Holders per Row)

Sidebrick Section for All Doll DL11 & DLH11 Kilns without Element Holders - Unit includes matching Top and Bottom 2-1/2" Bricks with three grooves but no Element Holders

Top Firebrick Slab for All DL11 & DLH11 Kilns - Unit includes a cemented 3" Brick Slab wrapped in the Stainless Steel Band with Angle Clips and Handle

Corner Brick for e2318-XT & e2327-XT Kilns. There are four pieces required per kiln section. They have two element groove cut-outs.

Corner Brick for e2318-XT and e2327-XT  Kilns - Unit includes one Brick cut specifically for this Series (Four per Kiln section)

Corner Brick for e2818-XT and e2827-XT Kilns - The unit includes one Brick cut specifically for this series (Four per Kiln section)

Insulation Blanket for Easy-Fire Kilns - Unit is prepunched, fits into the inside of the Element Cover Box, and is used with All Easy-Fire Kilns

Element Connection Sidebrick for all Easy-Fire XT Square kilns with Element Holders - Unit includes one 3" Brick with two rows of Element Holders (Two 1-3/8" Holders per Row)

Side brick for Easy-Fire XT Square Kilns without Element Channels. The unit includes one 3" Brick with two grooves but no Element Channels

Side brick for e2318-XT, e2327-XT, e2818-XT, and e2827-XT Kilns with Element Channels - Unit includes one 3" Brick with two rows of Element Channels (One 4-1/4" Channel per Row)

This is made from a K25 brick. Dimensions for the plug portion are 2-3/4" by 1-7/8" by 5-1/2" long and for the top portion are 2-1/2" by 2-1/2" by 4". 

One Gallon of Hi-Temp Cement - This is the same Hi-Temp Brick Cement used to cement Lids and Bases together during production. Comes in four plastic quart jars with screw-on lids.