KILN:
JD2945-3 Electric Kiln
Polygonal Sectional Kiln with Plug-in separate control panel
KILN:
JD2945-3 Electric Kiln
Polygonal Sectional Kiln with Plug-in separate control panel
KEY SPECS
Model JD2945-3 Jupiter Automatic Kiln with Multi-Program Three-Zoned DynaTrol mounted in a separate easy-to-maintain control panel mounted on the kiln (which fires cool because of the air space between the controls and the kiln). Sectional and modular construction allows for future expansion. Kiln comes with hard ceramic element holders, protected thermocouples, a strong solid-top stand, and solid peephole plugs. 28" diameter by 45" high (17 cubic feet). 3" K23 brick. Direct power connection. Three thermocouples. No charge for 3-phase versions. C-MET-us listed in the USA & Canada. Cone 10 all voltages. For export: see Crating Charges and Export Options in the Accessories Tab for crating charges. Jupiter Kilns include Genesis Touchscreen Zone Control
- Part Number:
H-J-K294/00
-
Includes: Twelve 25-1/2" Half Round Hollow Core Shelves (5/8" thick),
Six each of 1/2", 1", 2", 4", 6", & 8" high 1-1/2" Square Ceramic Posts,
and One Pair Heat Resistant Gloves
- Price:
$1,290.00
- Insulation:
3" K23 Firebrick
- Sections:
Five 9" high sections
- Inside Dimensions:
28.00"
Diameter x
45.00"
High (71.12 cm Diameter x 114.3 cm High)
- Outside Dimensions:
36.00"
Wide x
49.00"
Deep x
92.00"
High (91.44 cm Wide x 124.46 cm Deep x 233.68 cm High)
- Weight:
590
lbs (268 kg)
| SKU |
Model Number |
Watts |
Volts |
Phase |
Fuse Size |
|
| K-A-294D/21 |
JD2945-3-208-1Ph |
20,800 |
208 |
Single Phase |
125 Amp |
|
- Additional Information
- Amps: 100
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 1 Ga
- Branch Fusing: Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-MET-us listed to UL499 Standards in the US and Canada
- Wiring Diagram(s):
|
| K-A-294D/22 |
JD2945-3-208-3Ph |
20,800 |
208 |
Three Phase (Delta) |
90 Amp |
|
- Additional Information
- Amps: 69.3
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 3 Ga
- Branch Fusing: Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-MET-us listed to UL499 Standards in the US and Canada
- Wiring Diagram(s):
|
| K-A-294D/31 |
JD2945-3-240-1Ph |
22,800 |
240 |
Single Phase |
125 Amp |
|
- Additional Information
- Amps: 95
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 1 Ga
- Branch Fusing: Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-MET-us listed to UL499 Standards in the US and Canada
- Wiring Diagram(s):
|
| K-A-294D/32 |
JD2945-3-240-3Ph |
22,800 |
240 |
Three Phase (Delta) |
90 Amp |
|
- Additional Information
- Amps: 65.8
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 4 Ga
- Branch Fusing: Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-MET-us listed to UL499 Standards in the US and Canada
- Wiring Diagram(s):
|
| K-A-294D/62 |
JD2945-3-480-3Ph |
22,800 |
460-480 |
Three Phase (Delta) |
40 Amp |
|
- Additional Information
- Amps: 27.4
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 10 Ga
- Branch Fusing: Branch Fused
- Element Wiring: Three Elements in Wye with 277 Volts per element
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-MET-us listed to UL499 Standards in the US and Canada
- Wiring Diagram(s):
|
| K-A-294D/41 |
JD2945-3-220-1Ph |
20,900 |
220-230 |
Single Phase |
125 Amp |
|
- Additional Information
- Amps: 95
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 1 Ga
- Branch Fusing: Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-MET-us listed to UL499 Standards in the US and Canada
- Wiring Diagram(s):
|
| K-A-294D/52 |
JD2945-3-380-3PY |
20,900 |
380 |
Three Phase (Wye) |
50 Amp |
|
- Additional Information
- Amps: 38
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 8 Ga
- Branch Fusing: Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-MET-us listed to UL499 Standards in the US and Canada
- Wiring Diagram(s):
|
| K-A-294D/82 |
JD2945-3-400-3PY |
20,900 |
400 |
Three Phase (Wye) |
50 Amp |
|
- Additional Information
- Amps: 36.3
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 8 Ga
- Branch Fusing: Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-MET-us listed to UL499 Standards in the US and Canada
- Wiring Diagram(s):
|
| K-A-294D/72 |
JD2945-3-415-3PY |
22,800 |
415 |
Three Phase (Wye) |
50 Amp |
|
- Additional Information
- Amps: 38
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 8 Ga
- Branch Fusing: Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-MET-us listed to UL499 Standards in the US and Canada
- Wiring Diagram(s):
|
| K-A-294Q/62 |
JD2945-3-480-3Ph-QD |
22,800 |
460-480 |
Three Phase (Delta) |
50 Amp |
|
- Additional Information
- Amps: 32.9
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 8 Ga
- Branch Fusing: Branch Fused
- Element Wiring: Two 240V Quad Elements in Series
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-MET-us listed to UL499 Standards in the US and Canada
- Wiring Diagram(s):
|
Control
The Genesis control includes a touchscreen interface and WIFI connectivity. The intuitive interface is easy to use and understand. A free phone app allows you to monitor your kiln remotely.
EVEN FIRING. MAKES LOADING MORE FLEXIBLE. ADJUSTS FOR ELEMENT AGING. No need to pay extra for this important feature! Zone control on an electric kiln gives you the utmost controllable temperature uniformity. The kiln control separately measures temperatures in the bottom, middle, and top of the ceramic kiln and automatically adjusts the heat output of three kiln zones during the entire glaze or bisque firing.
PLUG-IN PANELS MAKE SJUPITER SECTIONAL KILNS FLEXIBLE. Each kiln section plugs into the Jupiter control panel. Easy to remove or change kiln configuration.
PROFESSIONAL-GRADE WIRING. Wiring is neatly laid out using National Electrical Code and UL499 Standards
Durability
KEEP YOUR WORK CLEAN. Ceramic protection tubes protect the end of the thermocouple. Keeps the oxide dust from the thermocouple tip from getting into the kiln while firing.
HEAVY-DUTY. Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
NO PINS TO REPLACE AND DAMAGE YOUR FIREBRICK! Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
STOP BREAKING PEEPHOLE PLUGS. Solid large non-tapered peepholes allow a wider view into the kiln. The peephole plugs are made from solid ceramic and are not as fragile as hollow-type plugs used on competitors' kilns.
NO CRIMPING! EASY TO CHANGE. Industrial-grade ceramic terminal blocks make changing elements easy. All contact between elements and wire lugs is over a wide surface of heavily torqued stainless steel washers. Wires are not crimped to element ends as in some other brands. This means you can change elements yourself without buying an expensive tool or hiring a kiln repair person.
FULL SUPPORT STAND. Aluminized stands are solid and corrosion-resistant. They offer solid support under the kiln - unlike spot-welded angle stands that are common in the industry.
PROTECT AND SUPPORT. Stainless Steel clips help the lid stay secure and durable. This extra step ensures that the lid won't slip out of the stainless steel band.
KEEP YOUR KILN LOOKING NEW. Corrosion resistant materials and methods result in a long-lasting kiln.
Ease of Use
WIDE OPEN - EASY-TO-LOAD. A feather-light spring hinge allows full access without a side support bar - for easy loading. Standard on all 10 and 12-sided polygonal kilns.
Serviceability
EASY - THE ORIGINAL PLUG-IN SECTIONAL CONSTRUCTION. Sectional kiln construction makes Jupiter kilns easy to move, set up and disassemble for maintenance. Kiln Sections all plug into a separate control panel making the kiln easy to take apart and reconfigure.
Support
THIS IS REALLY IMPORTANT WHEN YOU CONSIDER THE ELECTRONIC CONTROL. Most L&L Kilns have a three-year limited warranty.
LET OUR EXPERIENCE WORK FOR YOU. The combined experience at L&L Kilns in kilns, ceramics, electrical engineering, and process engineering is unsurpassed. We work as a team to help you get your answers and help.
LIKE HAVING A KILN LIBRARY AT YOUR FINGERTIPS. The combined experience at L&L Kilns in kilns, ceramics, electrical engineering, and process engineering is unsurpassed. We provide a visual parts list with photographs, part numbers, prices, and helpful information to reduce confusion when ordering parts. We also include well-vetted information and wisdom from our industry partners to ensure our customers have access to all the basic information necessary to be successful from the first firing.
Safety
CERTIFIED SAFE. Most L&L kilns are MET listed to UL499 standards. Listed kilns include Easy-Fire Pottery Kilns, eQuad-Pro Professional Kilns, eFL Front-Loading Kilns, Jupiter Sectional Kilns, DaVinci Square & Rectangular Production Kilns, School-Master School Kilns, Fuego Home Craft Kilns, and Doll-Test Kilns. Easy-Load Production Front-Loading kilns are MET-Us Listed for the USA only.
Controls
Electronic High Limit Back Up Control acts as an upper limit back up to the main control. Back up contactors are also available.
Solid State Relays are quiet and result in longer element life because the switching time is so fast the elements don’t heat and cool as much the way the will with regular mechanical contactors. The whole system includes heat sinks, special fast acting fuses, cooling fan and extra safety relays.
Traditional 24-button Keypad control. This control can be substituted for any Genesis full-sized control.
Thermocouples
Type S Platinum Thermocouples are recommended for high fire applications. NOTE: Price of upgrade is per each thermocouple.
Pyrocil thermocouples are sensitive but limited to about 2200°F but offer greater sensitivity to temperature change and so may be appropriate in applications below 2200°F that require sensitivity. NOTE: Price of upgrade is per each thermocouple.
Vents
A Critical component in the longevity of your kiln!The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln.
The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with the control.
The Vent Doubler allows you to use one vent on two kilns.
Kiln Furniture
Kiln furniture kits are the recommended set of ceramic shelves, posts, and heat-resistant gloves for each kiln model. These are for loading the work in the kiln.
These safety gloves are perfect for handling hot work when unloading a kiln.
Power
This option helps protect your control from electrical noise
L&L's 480 volt option with NEMA 1 control panel
Shipping/Crating
ISPM-15 Skids ready for export. Accessories are normally packed on top of the kiln.
Elements
The combination of 1/2" diameter element coils, the doubled surface area of the Quad element design, and superior heat transfer of L&L's patented ceramic element holders, make this the best element system in the world today.
APM elements increase element life in difficult applications
- Kiln:
Skid #1: 48in L x 40in W x 47in H | Skid #2: 48in L x 40in W x 47in H
(
Skid #1: 122cm L x 102cm W x 119cm H | Skid #2: 122cm L x 102cm W x 119cm H
)
- Ship Weight:
670
lbs (304 kg)
- Kiln with Furniture Kit:
Skid #1: 48in L x 40in W x 47in H | Skid #2: 48in L x 40in W x 47in H
(
Skid #1: 122cm L x 102cm W x 119cm H | Skid #2: 122cm L x 102cm W x 119cm H
)
- Ship Weight:
845
lbs (383 kg)
- Kiln with Vent:
Skid #1: 48in L x 40in W x 54in H | Skid #2: 48in L x 40in W x 54in H
(
Skid #1: 122cm L x 102cm W x 137cm H | Skid #2: 122cm L x 102cm W x 137cm H
)
- Ship Weight:
685
lbs (311 kg)
- Kiln with Vent and Furniture Kit:
Skid #1: 48in L x 40in W x 58in H | Skid #2: 48in L x 40in W x 58in H
(
Skid #1: 122cm L x 102cm W x 147cm H | Skid #2: 122cm L x 102cm W x 147cm H
)
- Ship Weight:
860
lbs (390 kg)
- Packaging:
Skidded Carton with Foam-in-Place packaging
|
|
|
| Kiln |
EL2436 Front-Loading Kiln
|
eFL2635 Front-Loading Kiln
|
| Description |
Commercial-grade front-loading kiln with multi-layered insulation, door elements, and heavy-duty welded case.
|
Studio Front-Loader
|
| Price |
$25,070.00
|
$13,365.00
|
| Type |
|
|
| Volume |
12.0 cubic feet
|
13.7 cubic feet
|
| Temperature |
Cone 10, 2350F, 1290C
|
Cone 10, 2350F, 1290C
|
|
