eFL Series - Affordable Front-Loading Studio Kilns
eFL Series - Affordable Front-Loading Studio Kilns
KILN:
eFL1626 Front-Loading Kiln
KILN:
eFL1626 Front-Loading Kiln
KEY SPECS
Model eFL1626 Front-Loading Kiln with Multi-Program Three-Zoned Genesis Touchscreen control, mounted in an easy-open, cool-firing, piggy-back control panel that is angled for easy viewing of control. Kiln comes with hard ceramic element holders, protected thermocouples, a stand, and solid peephole plugs. The sides and top are arched for super strength. The base, door, and door frame are formed from precision sheet metal to be lightweight and strong. These kilns ship by common carrier, and are inexpensive to buy, install, and maintain. 17"W by 26"H by 26" D (6.6 cubic feet). 3" K23 brick. All models are rated to Cone 10. *A special model eFL1626-208-X is rated at Cone 5 but has 48.0 amps and a 60 amp fuse. Plugs on US Models only: 6-50P on single phase and 15-50P on three phase for all eFL1626 models except the standard eFL1626-208 1 Phase, which needs to be direct wired. Three thermocouples. No charge for 3-phase versions. C-MET-us is listed to UL499 in the USA & Canada. Note: Casters are optional. eFL Kilns include Genesis Touchscreen Multi-Zone ControlNote on Receiving the Kiln: These kilns take some effort to remove from the pallet and set up. Some assembly is required. Please see the details in the Shipping Checklist: See Pre-Order Checklist. See these videos to see how to unpack and assemble an eFL Series kiln. See this page for crating charges and crate options.
- Part Number:
H-J-1626/KT
-
Includes: Three 14" x 24" Rectangular Shelves (3/4" thick),
Six Each 1/2", 1", 2", 4", 6", and 8" Square Posts,
and One Pair Heat Resistant Gloves
- Price:
$550.00
| SKU |
Model Number |
Watts |
Volts |
Phase |
Fuse Size |
|
| K-H-1626/21 |
eFL1626- 208-1P |
11,649 |
208 |
Single Phase |
70 Amp |
|
- Additional Information
- Amps: 56
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 4 Ga
- Branch Fusing: Not Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-ETL-us listed to UL499 in the USA and CSA C22.2#221:2020 in Canada
- Wiring Diagram(s):
E381-100 eFL1626 208-220-240V 1 PH
|
| K-H-162X/21 |
eFL1626- 208-X-1P |
9,984 |
208 |
Single Phase |
60 Amp |
|
- Additional Information
- Amps: 48
- Wire Connection: NEMA 6-50 1 Phase Plug with six foot cord. Neutral is not used. (Kiln may be direct wired without affecting the MET listing)
- Wire Gauge (75 deg C) for Connection: 6 Ga
- Branch Fusing: Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 5, 2170F, 1190C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-ETL-us listed to UL499 in the USA and CSA C22.2#221:2020 in Canada
- Wiring Diagram(s):
E381-100A eFL1626 208V 1Ph High Powered X Model
|
| K-H-1626/22 |
eFL1626-208-3Ph |
12,500 |
208 |
Three Phase (Delta) |
50 Amp |
|
- Additional Information
- Amps: 34.7
- Wire Connection: NEMA 15-50 3 Phase Plug with six foot cord. Neutral is not used. (Kiln may be direct wired without affecting the MET listing)
- Wire Gauge (75 deg C) for Connection: 8 Ga
- Branch Fusing: Not Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-ETL-us listed to UL499 in the USA and CSA C22.2#221:2020 in Canada
- Wiring Diagram(s):
E381-200 eFL1626 208-220-240V 3 PH
|
| K-H-1626/31 |
eFL1626-240-1Ph |
11,520 |
240 |
Single Phase |
60 Amp |
|
- Additional Information
- Amps: 48
- Wire Connection: NEMA 6-50 1 Phase Plug with six foot cord. Neutral is not used. (Kiln may be direct wired without affecting the MET listing)
- Wire Gauge (75 deg C) for Connection: 6 Ga
- Branch Fusing: Not Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-ETL-us listed to UL499 in the USA and CSA C22.2#221:2020 in Canada
- Wiring Diagram(s):
E381-100 eFL1626 208-220-240V 1 PH
|
| K-H-1626/32 |
eFL1626-240-3Ph |
12,500 |
240 |
Three Phase (Delta) |
40 Amp |
|
- Additional Information
- Amps: 30.1
- Wire Connection: NEMA 15-50 3 Phase Plug with six foot cord. Neutral is not used. (Kiln may be direct wired without affecting the MET listing)
- Wire Gauge (75 deg C) for Connection: 8 Ga
- Branch Fusing: Not Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-ETL-us listed to UL499 in the USA and CSA C22.2#221:2020 in Canada
- Wiring Diagram(s):
E381-200 eFL1626 208-220-240V 3 PH
|
| K-H-1626/62 |
eFL1626-480-3Ph |
12500 |
460-480 |
Three Phase (Delta) |
20 Amp |
|
- Additional Information
- Amps: 15
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 14 Ga
- Branch Fusing: Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for USA market only
- CE: Not CE certified
- UL499: c-ETL-us listed to UL499 in the USA and CSA C22.2#221:2020 in Canada
- Wiring Diagram(s):
|
| K-H-1626/41 |
eFL1626-220-1Ph |
12,500 |
220-230 |
Single Phase |
80 Amp |
|
- Additional Information
- Amps: 56.8
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 4 Ga
- Branch Fusing: Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-ETL-us listed to UL499 in the USA and CSA C22.2#221:2020 in Canada
- Wiring Diagram(s):
E381-400 eFL1626 220V 1 PH
|
| K-H-1626/52 |
eFL1626-380-3PY |
12,500 |
380 |
Three Phase (Wye) |
25 Amp |
|
- Additional Information
- Amps: 18.9
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 12 Ga
- Branch Fusing: Not Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-ETL-us listed to UL499 in the USA and CSA C22.2#221:2020 in Canada
- Wiring Diagram(s):
E381-300 eFL1626 380-415V 3Y
|
| K-H-1626/82 |
eFL1626-400-3PY |
12,500 |
400 |
Three Phase (Wye) |
25 Amp |
|
- Additional Information
- Amps: 18.1
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 12 Ga
- Branch Fusing: Not Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-ETL-us listed to UL499 in the USA and CSA C22.2#221:2020 in Canada
- Wiring Diagram(s):
E381-300 eFL1626 380-415V 3Y
|
| K-H-1626/72 |
eFL1626-415-3PY |
12,500 |
415 |
Three Phase (Wye) |
25 Amp |
|
- Additional Information
- Amps: 17.4
- Wire Connection: Direct Wire Connection (no cord included)
- Wire Gauge (75 deg C) for Connection: 12 Ga
- Branch Fusing: Not Branch Fused
- Element Wiring: Parallel
- Max Temperature: Cone 10, 2350F, 1290C
- Certifications
- International: Made for all markets except EU
- CE: Not CE certified
- UL499: c-ETL-us listed to UL499 in the USA and CSA C22.2#221:2020 in Canada
- Wiring Diagram(s):
E381-300 eFL1626 380-415V 3Y
|
Control
The Genesis control includes a touchscreen interface and WIFI connectivity. The intuitive interface is easy to use and understand. A free phone app allows you to monitor your kiln remotely.
EVEN FIRING. MAKES LOADING MORE FLEXIBLE. ADJUSTS FOR ELEMENT AGING. The kiln control separately measures temperatures in the bottom, middle, and top of the ceramic kiln. It automatically adjusts the heat output of three kiln zones during the entire glaze or bisque firing.
EASY TO SEE AND PROGRAM THE CONTROL. Angled control panel makes viewing control and programming easier.
Serviceability
Durability
KEEP YOUR WORK CLEAN. Ceramic protection tubes protect the end of the thermocouple. Keeps the oxide dust from the thermocouple tip from getting into the kiln while firing.
HEAVY-DUTY. Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
Discover L&L’s exclusive ceramic element holders that protect kiln elements, ensure easy maintenance, and deliver consistent, reliable firing results.
STOP BREAKING PEEPHOLE PLUGS. Solid large non-tapered peepholes allow a wider view into the kiln. The peephole plugs are made from solid ceramic and are not as fragile as hollow-type plugs used on competitors' kilns.
PROTECT AND SUPPORT. Stainless Steel clips help the lid stay secure and durable. This extra step ensures that the lid won't slip out of the stainless steel band.
KEEP YOUR KILN LOOKING NEW. Corrosion resistant materials and methods result in a long-lasting kiln.
Support
LET OUR EXPERIENCE WORK FOR YOU. The combined experience at L&L Kilns in kilns, ceramics, electrical engineering, and process engineering is unsurpassed. We work as a team to help you get your answers and help.
Safety
EXTRA SAFETY FOR FRONT-LOADING KILNS. Shuts off power to kiln when the door is open
Controls
Traditional 24-button Keypad control. This control can be substituted for any Genesis full-sized control.
Electronic High Limit Back Up Control acts as an upper limit back up to the main control. Back up contactors are also available.
Solid State Relays are quiet and result in longer element life because the switching time is so fast the elements don’t heat and cool as much the way the will with regular mechanical contactors. The whole system includes heat sinks, special fast acting fuses, cooling fan and extra safety relays.
Thermocouples
Type S Platinum Thermocouples are recommended for high fire applications. NOTE: Price of upgrade is per each thermocouple.
Pyrosil thermocouples offer greater sensitivity to temperature change, but are limited to about 2200°F, and so may be appropriate in applications below 2200°F that require sensitivity. NOTE: Price of upgrade is per each thermocouple.
Vents
A Critical component in the longevity of your kiln!The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln.
The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with the control.
Kiln Furniture
Kiln furniture kits are the recommended set of ceramic shelves, posts, and heat-resistant gloves for each kiln model. These are for loading the work in the kiln.
Power
This option helps protect your control from electrical noise
Optional plugs and cords are dependent on model and voltage
L&L's 480 volt option with NEMA 1 control panel
Shipping/Crating
Miscellaneous
Rolling casters allow your kiln to be moved around to save space. Available on the elF kilns except for the eFL2635. Rolling casters swivel and lock.
- Kiln:
48in L x 48in W x 50in H
(
122cm L x 122cm W x 127cm H
)
- Ship Weight:
635
lbs (288 kg)
- Kiln with Furniture Kit:
48in L x 48in W x 50in H
(
122cm L x 122cm W x 127cm H
)
- Ship Weight:
700
lbs (318 kg)
- Kiln with Vent:
48in L x 48in W x 50in H
(
122cm L x 122cm W x 127cm H
)
- Ship Weight:
650
lbs (295 kg)
- Kiln with Vent and Furniture Kit:
48in L x 48in W x 50in H
(
122cm L x 122cm W x 127cm H
)
- Ship Weight:
715
lbs (324 kg)
- Packaging:
Engineered Pallet for kiln unloading with high lift pallet jack with Foam-in-Place packaging
|
|
|
|
|
| Kiln |
e23T-3 Pottery Kiln
|
eQ2327-3 Production Kiln
|
eFL2026 Front-Loading Kiln
|
EL2424 Front-Loading Kiln
|
| Description |
Flagship Pottery and School Kiln
|
Production Pottery Kiln
|
Studio Front-Loader
|
Commercial-grade front-loading kiln with multi-layered insulation, door elements, and heavy-duty welded case.
|
| Price |
$5,125.00
|
$6,280.00
|
$9,050.00
|
$15,870.00
|
| Type |
|
|
|
|
| Volume |
6.7 cubic feet
|
6.7 cubic feet
|
8.6 cubic feet
|
8.0 cubic feet
|
| Temperature |
Cone 10, 2350F, 1290C
|
Cone 10, 2350F, 1290C
|
Cone 10, 2350F, 1290C
|
Cone 10, 2350F, 1290C
|
|
