L-G-6NUT/00
$2.25
#6 Nut and Lock Washer - Set is used to mount the Control Transformer, Power Relay, and Power Terminal Block to the Control Box or Contactor Plate. (Note screw is shown only for illustration)
June 20, 2025
|
|---|
SHOP KILN PARTS
L-J-TBKT/00
$10.15
Mounting Kit for Old Style (Red) Element Terminal Boards - Kit includes four 1/4" high ceramic spacers and two #8 x 1-1/2" long stainless sheet metal screws. 
L-J-PBMT/01
$11.50
Mounting Kit for Old Style (Red) Power Connection Boards - Kit includes all Hardware 
L-G-SWCH/00
$113.00
L-G-SWTG/00
$31.00
On/Off Toggle Switch - Unit is used to switch the Control Board on and off on All Automatic Kilns 
L-G-SWTG/PL
$3.60
Toggle Switch Legend Plate - Unit is used in conjunction with All On/Off Toggle Switches 
E-O-2000/20
$118.00
Voltage:
208
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
E-O-2000/30
$118.00
Voltage:
240
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
E-O-2500/20
$128.00
Voltage:
208
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
NO IMAGE
E-O-2500/30
$128.00
Voltage:
240
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
E-O-3000/20
$139.00
Voltage:
208
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
E-O-3000/30
$139.00
Voltage:
240
Size (Diameter):
Small (.38" OD, Prior 1996)
Can be used for single or three phase.
L-G-FSPB/30
$52.00
30 Amp Panel Mount Fuse Holder for BAN 
L-G-FSPB/00
$26.00
1/2 Amp Panel Mount Fuse Holder for Control Fuse 
C-G-PEEP/TN
$15.25
Ceramic Peep Hole Plug - Unit is a approximately 7/8" Diameter (.86") x 3.75" Long Top Hat Style Plug (Stepped Head has a 1.5" Diameter and serves as a heat lock) 
M-A-PIGB/PK
$7.00
10 Pack - Insulated Piggyback Terminal - Unit is a Female Slip On with a Male Spade attached, can accommodate up to 16-14 AWG and a 1/4" Spade, and is used on Relays (REF: E-TRM-PIGBAK-A1) 
H-D-7738PF
$40.00
High alumina kiln shelf, 7" X 7" X 3/8" thick used in the Plug-n-Fire Model PF8 
H-D-PF8X/00
$72.00
One 7" X 7" X 3/8" cordierite shelf
and Three 3" posts
E-D-PF8X/10
$46.00
Voltage:
120
Size (Diameter):
Large- (.46" OD, 2004-Present)
Used on the Plug-n-Fire Kiln (Cone 10 on 120 volts, 12.5 amps for 15 Amp circuit) 
E-D-PF88/10
$60.00
Voltage:
120
Size (Diameter):
Large- (.46" OD, 2004-Present)
Used on the Plug-n-Fire Kiln (Cone 10 on 120 volts, 15 amps for 20 Amp circuit) 
L-G-PBLG/01
$71.00
2 Pole Power Connection Block - Units is rated for 175 Amps and is used with All Jupiter Automatic and Jupiter Manual Kilns at any Voltage and 1 Phase Power 
L-G-PBLG/02
$80.00
3 Pole Power Connection Block - Units is rated for 175 Amps and is used with All Jupiter Automatic and Jupiter Manual Kilns at any Voltage and 3 Phase Power 
L-G-PBLG/05
$164.00
1 Pole Power Connection Block - Unit is rated for 335 Amps and is used with DaVinci Kilns at 480 Volts or 380 Volts and 3 Phase Power that require an extra Power Connection 
L-G-PBLG/03
$262.00
3 Pole Power Connection Block - Unit is rated for 335 Amps and is used with DaVinci Kilns at any Voltage and Phase Power 
L-G-PC20/10
$70.00
20 Amp NEMA 5-20P Power Cord - Unit is a 72" Long Cord and can be used at 120 Volts and 1 Phase Power 
L-G-PC50/72
$139.00
50 Amp NEMA 6-50P Power Cord - Unit is a 72" Long Cord with a Three Prong Plug and is used with all Easy-Fire Kilns at any Voltage and 1 Phase Power, all J1800 & JD1800, J23 & JD23, and J230 & JD230 Kilns, and many other kilns at any Voltage and 1 Phase Power (Also used for retrofit on Older Econo J1400 Series Kilns). Wires are 105 Deg C rated with two 6 gauge wires and one 8 gauge ground wire. 
L-G-PCGS/30
$113.00
L-G-CHEU/31
$73.00
Used on European version vents, Chameleon, Fuego, Robin and Corona kilns. 15 amp. 
L-G-CHUK/31
$73.00
Used on UK version vents, Chameleon kilns, Fuego, Robin and Corona kilns. 13 amp.
L-G-CHUS/31
$91.00
L-G-1030/LB
$211.00
30 Amp NEMA 10-30P Power Cord - The unit is 12' Long with a Three Prong Plug and can be used with any kiln that is 24 amps or below and is 208 or 240 volts and single phase
L-G-1430/LB
$211.00
30 Amp NEMA 14-30P Power Cord - Unit is 12' Long with a Four Prong Plug and is used with All Liberty-Belle Kilns at any Voltage and 1 Phase Power 
L-G-1450/LB
$211.00
50 Amp NEMA 14-50P Power Cord - The unit is 12' Long with a Four Prong Plug and can be used with any kiln that is 48 amps or below and is 208 or 240 volts and single phase 
L-G-0650/12
$200.00
50 Amp NEMA 6-50P Power Cord - Unit is 12' Long with a Three Prong Plug and can be used with any kiln that is 48 amps or below and is 208 or 240 volts and single phase 
L-G-PC50/3P
$159.00
50 Amp NEMA 15-50P Power Cord - Unit is a 72" Long Cord with a Four Prong Plug and is used with All Easy-Fire Kilns at any Voltage and 3 Phase Power and All J1800 & JD1800, J23 & JD23, and J230 & JD230 Kilns at any Voltage and 3 Phase Power 
L-G-PC15/10
$63.00
15 Amp NEMA 5-15P Power Cord - Unit is a 72" Long Cord and can be used at 120 Volts and 1 Phase Power 
M-V-CORD/00
$77.00
Vent-Sure Vent System Power Cord - Unit includes a cord mounted On/Off Switch 
L-G-RL30/20
$118.00
2 Pole Power Relay - Unit is rated for 30 Amps (resistive load below 300 Volts) with a 208 Volt Coil and is used in Older Manual Kilns and Renaissance Kilns at 208 Volts and any Phase Power
L-G-RL30/30
$118.00
2 Pole Power Relay - Unit is rated for 30 Amps (resistive load under 300 volts) with a 240 Volt Coil and is used in Older Manual Kilns and Renaissance Kilns at 240 Volts and any Phase Power |
