Plug-n-Fire PF8 120V 1800W 15A Element
Description
Used on the Plug-n-Fire PF8 Kiln (Cone 10 on 120 volts, 15 amps for 20 Amp circuit).
This is an upgrade element to the element that the PF8 comes with, but requires a 20amp outlet. If you wish to upgrade to this element, we will send you an updated Data Label to replace your existing one on the controller.
- Electrical
- Voltage:
120
- Size (Diameter):
Large- (.46" OD, 2004-Present)
- Tips
There are 2 of these elements per kiln. Both elements have the same resistance (ohm) value.
When changing elements, inspect your element terminals and consider replacing all the hardware if there is any oxidation. You will get a 50% discount on the terminal hardware if you order a complete set of elements. The terminal hardware set for this kiln is here.
See instructions here on installing elements.
- Ordering
- Part Number:
E-D-PF88/10
- Price:
$60.00/Each
- Number of Elements Per Typical Kiln: 2
- Lead Time:
One Week to Ten Days
- Return Policy:
Part is returnable for a 50% restocking charge
