L&L KILN SERIES:
eQuad-Pro Production Kilns
KILN:

eQ2836-3 Production Kiln

Production Pottery Kiln

KILN:

eQ2836-3 Production Kiln

Production Pottery Kiln

    KEY SPECS
  • Polygonal Kilns
  • Medium-Large
    (13.6 cubic feet)
  • DynaTrol Zone Control
  • Cone 10, 2350F, 1290C
$7,550
ESTIMATED LEAD TIME: 8 to 12 Weeks
See Lead Times & Confirmation Process
WHERE TO BUY
PDF Brochure Dimension Diagram Instructions

Model eQ2836-3 eQuad-Pro Production Kiln with Multi-Program Three-Zoned DynaTrol mounted in an easy-open cool-firing piggy-back control panel (the panel is not angled like the shorter eQuad-Pro kilns). Kiln comes with hard ceramic element holders, Quad Heavy Duty Elements, protected thermocouples, a strong solid-top stand, an easy-lift spring hinge, and solid peephole plugs. 28" diameter by 36" high (13.6 cubic feet). 3" K23 brick. Higher power than normal kilns. Includes panel circuit fuses. Direct power connection. Cone 10 for all voltages. Three thermocouples. No charge for 3-phase versions. C-MET-us is listed in the USA & Canada. Cone 10 for all voltages. For export: see Crating Charges and Export Options in the Accessories Tab for crating charges.

eQuad Kilns include FREE Zone Control.

Furniture Kit for JD2936-3 & eQ2836-3 (3" brick)
  • Part Number:
    H-J-K293/00
  • Includes: Ten 25-1/2" Half Round Shelves (3/4" thick), Six each of 1/2", 1", 2", 4", 6", & 8" high 1-1/2" Square Ceramic Posts, and One Pair Heat Resistant Gloves
  • Price:
    $1,050.00
  • Insulation:
    3" K23 Firebrick
  • Sections:
    Four 9" high sections
  • Inside Dimensions:
    28.00"
    Diameter x
    36.00"
    High (71.12 cm Diameter x 91.44 cm High)
  • Outside Dimensions:
    35.00"
    Wide x
    49.00"
    Deep x
    83.00"
    High (88.9 cm Wide x 124.46 cm Deep x 210.82 cm High)
  • Weight:
    540
    lbs (245 kg)
SKU Model Number Watts Volts Phase Fuse Size
K-Q-2836/21 eQ2836-3-208-1Ph 19,000 208 Single Phase 125 Amp
  • Additional Information
  • Amps: 91.3
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1/0 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-Q-283X/21 eQ2836-X-3-208-1Ph 16,640 208 Single Phase 100 Amp
  • Additional Information
  • Amps: 80
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-Q-2836/22 eQ2836-3-208-3Ph 19,000 208 Three Phase (Delta) 80 Amp
  • Additional Information
  • Amps: 60.4
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 3 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-Q-2836/31 eQ2836-3-240-1Ph 19,000 240 Single Phase 100 Amp
  • Additional Information
  • Amps: 79.2
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-Q-2836/32 eQ2836-3-240-3Ph 19,000 240 Three Phase (Delta) 70 Amp
  • Additional Information
  • Amps: 52.4
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 4 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-Q-2836/41 eQ2836-3-220-1Ph 19,000 220-230 Single Phase 100 Amp
  • Additional Information
  • Amps: 86.4
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-Q-2836/52 eQ2836-3-380-3PY 19,000 380 Three Phase (Wye) 60 Amp
  • Additional Information
  • Amps: 43.2
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-Q-2836/82 eQ2836-3-400-3PY 21,576 400 Three Phase (Wye) 60 Amp
  • Additional Information
  • Amps: 46.9
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-Q-2836/72 eQ2836-3-415-3PY 19,000 415 Three Phase (Wye) 50 Amp
  • Additional Information
  • Amps: 39.6
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):

Control

DynaTrol Multi-Program Zone Control
GREAT EASY-TO-USE CONTROL. DynaTrol with 4 Easy-Fire programs (Slow Bisque, Fast Bisque, Slow Glaze, Fast Glaze), 6 custom programs, PreHeat, Delay, Program, Segment Review, and Diagnostics. Zone control is included on most kilns. Also see Genesis Touch Screen Option with Phone App for Remote Monitoring.
Automatic Zone Control
EVEN FIRING. MAKES LOADING MORE FLEXIBLE. ADJUSTS FOR ELEMENT AGING. No need to pay extra for this important feature! Zone control on an electric kiln gives you the utmost controllable temperature uniformity. The kiln control separately measures temperatures in the bottom, middle, and top of the ceramic kiln and automatically adjusts the heat output of three kiln zones during the entire glaze or bisque firing.
Angled Control Panel
EASY TO SEE AND PROGRAM THE CONTROL. Angled control panel makes viewing control and programming easier.
Mercury Free Contactors
HEAVY-DUTY. Power Relays are mercury-free to comply with increasing regulations and concerns about mercury. Solid State Contactors are available as an option on most L&L Kilns.
On-Off Switch and Panel Fuse
WHY WOULDN'T YOU HAVE AN ON-OFF SWITCH? All L&L Kilns come with an on-off switch and panel-mounted control fuse. We do not rely on kiln control to keep the kiln off.

Serviceability

Easy to Remove & Service Control Panel
THIS IS THE SAFEST AND EASIEST KILN TO WORK ON. The Control panel pulls down easily and remains perpendicular to the element box for very easy access. All wiring is neatly laid out in a professional and industrial way with color coding and numbering for easy repair and troubleshooting. Best of all the double panel design results in cooler panels and longer control and relay life.
Sectional Kiln Construction (Most L&L Kilns)
EASY TO MOVE ANYWHERE. Sectional kiln construction makes kilns easy to move, set up and disassemble for maintenance.
Reversible Bottoms
OOPS... JUST TURN IT OVER. The bottom can be easily reversed in case of a firing mishap.

Durability

Protected Thermocouples
KEEP YOUR WORK CLEAN. Ceramic protection tubes protect the end of the thermocouple. Keeps the oxide dust from the thermocouple tip from getting into the kiln while firing.
Heavy-Duty Type K Thermocouples
HEAVY-DUTY. Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
Quad Element Design
BEST ELEMENT SYSTEM FOR HIGH-TEMPERATURE FIRING. The Quad Element System provides a massively robust element for long life under production conditions. Standard on eQuad-Pro and JH Series. Optional on most other kiln series.
Hard Ceramic Element Holders Make L&L Kilns More Durable
NO PINS TO REPLACE AND DAMAGE YOUR FIREBRICK! Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
Solid Wide-View Peephole Plugs
STOP BREAKING PEEPHOLE PLUGS. Solid large non-tapered peepholes allow a wider view into the kiln. The peephole plugs are made from solid ceramic and are not as fragile as hollow-type plugs used on competitors' kilns.
Molded Ceramic Element Connections
NO CRIMPING! EASY TO CHANGE. Industrial-grade ceramic terminal blocks make changing elements easy. All contact between elements and wire lugs is over a wide surface of heavily torqued stainless steel washers. Wires are not crimped to element ends as in some other brands. This means you can change elements yourself without buying an expensive tool or hiring a kiln repair person.
Solid Super-Strong Aluminized Steel Stand
FULL SUPPORT STAND. Aluminized stands are solid and corrosion-resistant. They offer solid support under the kiln - unlike spot-welded angle stands that are common in the industry.
Proprietary Reflective Coating Hardens & Seals Brick
Special brick coating hardens and seals brick for durability and cleaner operation.
Stainless Clips Secure Lids to Bands
PROTECT AND SUPPORT. Stainless Steel clips help the lid stay secure and durable. This extra step ensures that the lid won't slip out of the stainless steel band.
Extra Case Clamps
Three case clamps per 9" high kiln section are redundant safety for your L&L kiln.
Corrosion Resistant Case
KEEP YOUR KILN LOOKING NEW. Corrosion resistant materials and methods result in a long-lasting kiln.

Ease of Use

Easy-Open Spring-Assisted Hinge
WIDE OPEN - EASY-TO-LOAD. A feather-light spring hinge allows full access without a side support bar - for easy loading. Standard on all 10 and 12-sided polygonal kilns.

Performance

Thermal Ceramics Firebrick
K23 firebrick combines good insulation with strength

Support

Three-Year Limited Warranty (Standard)
THIS IS REALLY IMPORTANT WHEN YOU CONSIDER THE ELECTRONIC CONTROL. Most L&L Kilns have a three-year limited warranty.
Superior Technical Support
LET OUR EXPERIENCE WORK FOR YOU. The combined experience at L&L Kilns in kilns, ceramics, electrical engineering, and process engineering is unsurpassed. We work as a team to help you get your answers and help.
Visual Detailed Instruction Manual
LIKE HAVING A KILN LIBRARY AT YOUR FINGERTIPS. The combined experience at L&L Kilns in kilns, ceramics, electrical engineering, and process engineering is unsurpassed. We provide a visual parts list with photographs, part numbers, prices, and helpful information to reduce confusion when ordering parts. We also include well-vetted information and wisdom from our industry partners to ensure our customers have access to all the basic information necessary to be successful from the first firing.

Controls

Genesis Touch Screen Control
The new Genesis control from Bartlett includes a touch screen interface and WIFI connectivity added to the proven software of the DynaTrol. A phone app allows you to monitor your kiln remotely.
Electronic High Limit Back Up Control
Electronic High Limit Back Up Control acts as an upper limit back up to the main control. Back up contactors are also available.
Solid State Relays
Solid State Relays are quiet and result in longer element life because the switching time is so fast the elements don’t heat and cool as much the way the will with regular mechanical contactors. The whole system includes heat sinks, special fast acting fuses, cooling fan and extra safety relays.

Thermocouples

Type S Platinum Thermocouples
Type S Platinum Thermocouples are recommended for high fire applications. NOTE: Price of upgrade is per each thermocouple.
Pyrocil Metal Sheathed Industrial Thermocouples
Pyrocil thermocouples are sensitive but limited to about 2200°F but offer greater sensitivity to temperature change and so may be appropriate in applications below 2200°F that require sensitivity. NOTE: Price of upgrade is per each thermocouple.

Miscellaneous

Rolling Kiln Stand
L&L's rolling kiln stand features heavy gauge (14 ga) galvannealed steel construction with multiple bends for extra strength, steel swivel locking casters, integrated vent collection box support, and guide rails for the kiln. Each size is fitted to the kiln.

Vents

Vent-Sure Downdraft Kiln Vent System
A Critical component in the longevity of your kiln!The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln.
Vent Control Programmed on DynaTrol & Genesis
The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis).
Vent Doubler System
The Vent Doubler allows you to use one vent on two kilns.

Kiln Furniture

Furniture Kits
Kiln furniture kits are the recommended set of ceramic shelves, posts and kiln wash that go with each kiln model. These are for loading the work in the kiln.
Safety Gloves
These safety gloves are perfect for handling hot work when unloading a kiln.

Power

120 Volt Power Supply & Electrical Noise Filter For Automatic Kilns
This option helps protect your control from electrical noise

Shipping/Crating

Crating Charges and Export Options for Standard Kilns
Export crates, ISPM-15 Skids for export, and special pallet designs for unloading Easy-fire kilns without a forklift.
  • Kiln:
    48 IN Wide X 40 IN Deep X 57 IN High
    (
    122 CM Wide X 102 CM Deep X 145 CM High
    )
  • Ship Weight:
    605
    lbs (274 kg)
  • Kiln with Furniture Kit:
    48 IN Wide X 40 IN Deep X 70 IN High
    (
    122 CM Wide X 102 CM Deep X 178 CM High
    )
  • Ship Weight:
    755
    lbs (342 kg)
  • Kiln with Vent:
    48 IN Wide X 40 IN Deep X 70 IN High
    (
    122 CM Wide X 102 CM Deep X 178 CM High
    )
  • Ship Weight:
    620
    lbs (281 kg)
  • Kiln with Vent and Furniture Kit:
    48 IN Wide X 40 IN Deep X 70 IN High
    (
    122 CM Wide X 102 CM Deep X 178 CM High
    )
  • Ship Weight:
    770
    lbs (349 kg)
  • Packaging:
    Skidded Carton with Foam-in-Place packaging

Turntable View

eQ2836-3 Production Kiln
Compare L&L Kilns
X2836-D Electric Kiln JD2936-3 Electric Kiln JD2936-3-PB Electric Kiln eFL2635 Front-Loading Studio Kiln EL2436 Front-Loading Kiln
Kiln X2836-D Electric Kiln JD2936-3 Electric Kiln JD2936-3-PB Electric Kiln eFL2635 Front-Loading Kiln EL2436 Front-Loading Kiln
Description

Large Rectangular Sectional Kiln

Plug-In Sectional Kiln

Plug-In Sectional Kiln

Studio Front-Loader

Industrial Grade Front-Loader
Price $10,800.00 $8,400.00 $1,325.00 $11,500.00 $22,425.00
Type Square & Rectangular Kilns, Pull-Apart Kilns Polygonal Kilns, Pull-Apart Kilns Polygonal Kilns, Pull-Apart Kilns Front-Loading Kilns Front-Loading Kilns
Volume 14.6 cubic feet 13.6 cubic feet 13.6 cubic feet 13.7 cubic feet 12.0 cubic feet
Temperature Cone 10, 2350F, 1290C Cone 10, 2350F, 1290C Cone 10, 2350F, 1290C Cone 10, 2350F, 1290C Cone 10, 2350F, 1290C