Square Premium Cordierite Ceramic Post - Unit is a 1-1/2" Sided Hollow Square x 1" High

Ceramic Element Holder #542 - Unit is a 1" Long Tan Standard Style Holder

Square Premium Cordierite Ceramic Post - Unit is a 1-1/2" Sided Hollow Square x 1/2" High

Cylindrical Ceramic Spacer - Unit is a 3/4" Diameter Cylinder x 1/4" High with a 1/4" Diameter hole in the center.

NOTE: These are also used to hold thick elements in place by using it as a wedge between the element and the ceramic holder. See this Knowledgebase page.

Full Round Premium Cordierite Ceramic Shelf - Unit is a Full Circle 12" in Diameter and 1/2" Thick. These are used on Fuego kilns.

Full Round Premium Cordierite Ceramic Shelf - Unit is a Full Circle 15" in Diameter and 5/8" Thick

Half Round Premium Cordierite Ceramic Shelf - Unit is a Half Circle 15" in Diameter and 5/8" Thick

Ceramic Element Holder #542 - Unit is a 2-1/2" Long Tan Standard Style Holder

Square Premium Cordierite Ceramic Post - Unit is a 1-1/2" Sided Hollow Square x 2" High

Half Round Premium Cordierite Ceramic Shelf - Unit is a Half Circle 20" in Diameter and 3/4" Thick.

Rectangular Premium Cordierite Ceramic Shelf - Unit is a Rectangle 22" Wide x 11" Long and 3/4" Thick

Rectangular Premium Cordierite Ceramic Shelf - Unit is a Rectangle 23" Wide x 11-1/2" Long and 3/4" Thick

Rectangular Premium Cordierite Ceramic Shelf - Unit is a Rectangle 24" Wide x 12" Long and 3/4" Thick

Rectangular Premium Cordierite Ceramic Shelf - Unit is a Rectangle 24" Wide x 14" Long and 3/4" Thick

Half Round Premium Cordierite Hollow Core Ceramic Shelf - Half Circle 25-1/2" in Diameter and 5/8" Thick.

Hollow core shelves match the strength of standard cordierite shelves while being only a fraction of the weight.

Rectangular Premium Cordierite Ceramic Shelf - Unit is a Rectangle 28" Wide x 14" Long and 3/4" Thick

Ceramic Element Holder #542 - Unit is a 3-15/16" Long Tan Standard Style Holder

Ceramic Element Holder #542 - Unit is a 3" Long Tan Standard Style Holder

3" X 1" X 1" triangular posts used in the Plug-n-Fire kiln

Ceramic Element Holder #542 - Unit is a 4-1/4" Long Tan Standard Style Holder

Square Premium Cordierite Ceramic Post - Unit is a 1-1/2" Sided Hollow Square x 4" High

Square Premium Cordierite Ceramic Post - Unit is a 1-1/2" Sided Hollow Square x 6" High

Square Premium Cordierite Ceramic Post - Unit is a 1-1/2" Sided Hollow Square x 8" High

Full Round Premium Cordierite Ceramic Shelf - Unit is a Full Circle 9" in Diameter and 3/8" Thick

This is used to prevent element ends from touching each other (on older kilns). A 21/64" diameter hole is drilled into the brick 1-1/4" deep and the assembly is inserted into the hole. The overall length is 2" and the thick end is about 3/4" long.

Ceramic Element Terminal Block for Easy-Load kilns.

(NO LONGER USED ON NEW KILNS AS OF APPROXIMATELY Nov 1, 2025) - newer kilns need this block. Check your kiln before ordering. 

The unit includes the terminal screw, nuts, and stainless flat washers. Lock washers are no longer needed.

You may also need two mounting screws.

See this link for wiring help (diagrams at the bottom of page)

Ceramic Element Terminal Block for M Series (middle section) Easy-Fire Kiln Sections. Was used on e18M, e18M-3, e23M, e23M-3, e28M-3 middle kiln sections that are 4.5" high.

(NO LONGER USED ON NEW KILNS AS OF APPROXIMATELY Feb 1, 2025) - newer kilns need this block. Check your kiln before ordering. 

The unit includes the terminal screws, nuts, and stainless flat washers. Lock washers are no longer needed.

You may also need two mounting screws.

See this link for wiring help (diagrams at the bottom of page)

Ceramic Element Terminal Block for Kiln Sections with Three Elements - Unit includes two Terminal Screw Assemblies.

(NO LONGER USED ON NEW KILNS AS OF APPROXIMATELY Sep 1, 2024) - newer kilns need this block. Check your kiln before ordering. 

You may also need two mounting screws

See this link for wiring help (diagrams at the bottom of page)

Ceramic Element Terminal Block for Kiln Sections with Three Elements - Unit includes four Terminal Screw Assemblies.

(NO LONGER USED ON NEW KILNS AS OF APPROXIMATELY Sep 1, 2024) - newer kilns need this block. Check your kiln before ordering. 

You may also need two mounting screws

See this link for wiring help (diagrams at the bottom of page)

This older version of our Ceramic Element Terminal Block has been discontinued and directly replaced with two of these NEW BLOCKS for every one of the old block.

If your old block has 3 bolts (series configuration, as pictured) then you need to order one of these jumper wires as well. 

You will also need 4 of these screws (2 per NEW BLOCK). 

Reference the diagrams at the bottom of this page for wiring your new blocks based on whether you have parallel or series elements.

This older version of our Ceramic Element Terminal Block has been discontinued and directly replaced with two of these NEW BLOCKS for every one of the old block.

If your old block has 2 bolts (parallel configuration, as pictured) then you need to order two of these jumper wires as well. 

You will also need 4 of these screws (2 per NEW BLOCK). 

Reference the diagrams at the bottom of this page for wiring your new blocks based on whether you have parallel or series elements.

Kit includes four each of 1/2", 1", 2", & 4" high 1-1/2" Square Ceramic Posts

Ceramic Handle for 2nd Generation Easy-Lift Hinges - The unit is 1" in Diameter, 7-15/16" in Length, and Includes Mounting Hardware

Acorn Nuts: M-A-ACRN/00 - (two included)
Threaded Rod: M-A-TROD/00 - (one included)

Element Insulator Bushing - Unit is used in conjunction with the Old Style (Red) Element Terminal Boards to keep the Element insulated from the Sheet Metal Casing

Corderiete Ceramic Tube: Element Insulator Tube - 4" long 5/16" OD x 3/1"6 ID. Used in some front-loading kilns for insulated the element ends as they protrude throught he insulation.

Lead Time: 1 to 2 weeks