June 21, 2025
|
|---|
SHOP KILN PARTS
L-G-RL50/62
$200.00
3 Pole Power Relay - Unit is rated for 50 Amps with a 120 Volt Coil - Unit is the standard Power Relay on All X2800-D & XB2800-D, X3200-D & XB3200-D, T2300-D & TB2300-D, and T3400-D & TB3400-D Series DaVinci Kilns and Easy-Load kilns that are rated for 480 volts. (Note: the 480 volt input current is reduced to 120 volts for the control circuit that controls the coils of these contactors)
L-G-RL50/30
$200.00
3 Pole Power Relay - Unit is rated for 50 Amps with a 240/208 Volt Coil - Unit is the standard Power Relay on All X2800-D & XB2800-D, X3200-D & XB3200-D, T2300-D & TB2300-D, and T3400-D & TB3400-D Series DaVinci Kilns and Hercules and Easy-Load kilns. These are used on kilns that have either 208 or 240 volt power. 
L-G-PB2P/EQ
$51.00
2 Pole Power Terminal Block - Unit is used on all eQuad and eFL kilns at any Voltage and 1 or 3 Phase Power (two used for 3 Phase). These are also used for 380-415/3 Phase Wye kilns that have a neutral by using two of them to create four connections. 
L-G-TRPW/EF
$31.00
Power Terminal Strip - Unit has Six 1/4" Spade Terminals on each side, comes with a Terminal Strip Marker Board and is used for the Power Wires on drop-down Control Panels 
L-G-HEMD/PR
$18.25
Set of wires is precut, terminated, and labeled to run from the Bottom Element Terminal Block to the Power Terminal Strip on all Two Section kilns, or from the Middle Element Terminal Block to the Power Terminal Strip on all Three Section Easy-Fire and School-Master Kilns. There are two wires in a set. Note: This is wire #3 and #4.
L-G-HEBM/PR
$18.25
Set of wires is precut, terminated, and labeled to run from the Bottom Element Terminal Block to the Power Terminal Strip on All Three Section Easy-Fire and School-Master Kilns. There are two wires per set. Note: This is wire #5 and #6.
L-G-HE3C/P1
$55.00
Power Wire Harness - Set of wires is precut, terminated, and labeled to run from the Power Connection Block to the Power Relays on all Easy-Fire and School-Master Kilns with three sections at any voltage and 1 Phase Power. There are six wires in a set. 
L-G-HE3C/P3
$55.00
Power Wire Harness - Set of wires is precut, terminated, and labeled to run from the Power Connection Block to the Power Relays on all Easy-Fire and School-Master Kilns with three sections at any voltage and 3 phase power. There are six wires in a set. 
L-G-HE2C/P1
$36.00
Power Wire Harness - Set of wires is precut, terminated, and labeled to run from the Power Connection Block to the Power Relays on all Easy-Fire Kilns with two sections at any voltage and 1 Phase Power. There are four wires per set. 
L-G-HE3C/PR
$55.00
Power Wire Harness - Set of wires is precut, terminated, and labeled to run from the Power Terminal Strip to the Power Relays on All Easy-Fire and School-Master Kilns with three sections at any voltage and phase power. There are six wires in a set. 
L-G-HE2C/PR
$36.00
Power Wire Harness - Set of wires is precut, terminated, and labeled to run from the Power Terminal Strip to the Power Relays on all Easy-Fire Kilns with two sections at any voltage and 1 Phase Power. There are four wires in a set. 
L-G-WSRT/EQ
$62.00
This includes 6 high-temperature power wires that connect the terminal strip inside the panel to the elements. All terminals are included as an assembly. All wires are white. 
L-G-WSRT/E6
$82.00
This includes 8 high-temperature power wires that connect the terminal strip inside the panel to the elements. All terminals are included as an assembly. All wires are white. 
L-G-HETP/PR
$18.25
Set of wires is precut, terminated, and labeled to run from the Top Element Terminal Block to the Power Terminal Strip on All Easy-Fire and School-Master Kilns. There are two wires per set. Note: This is wire #1 and #2.
M-G-PRIM/50
$15.25
1/2 Pint of Primer Mix - This is the same Primer Mix included in the Brick Repair Kit. Comes in a plastic jar with a screw-on lid. 
R-Q-2827/41
$1,790.00
eQuad-Pro eQ2827-3 220V/1 Phase 1 & 380V/3 Phase Wye Heated Section - Unit is one complete 9" high Section (Ring). Includes Quad elements with four rows of elements. 
E-R-1624/2D
$62.00
Voltage:
208
Size (Diameter):
Large- (.46" OD, 2004-Present)
Renaissance R1624 208 Volt/1 & 3 Phase Large Door Element (.46" Outside Diameter) - Used on All R1624 Kilns at this Voltage
E-R-1624/2S
$108.00
Voltage:
208
Size (Diameter):
Large- (.46" OD, 2004-Present)
Renaissance R1624 208 Volt/1 & 3 Phase Large Side and Back Wrap-Around Element (.46" Outside Diameter) - Used on All R1624 Kiln Sides and Backs at this Voltage
E-R-1624/3D
$62.00
Voltage:
240
Size (Diameter):
Large- (.46" OD, 2004-Present)
Renaissance R1624 240 Volt/1 & 3 Phase Large Door Element (.46" Outside Diameter) - Used on All R1624 Kilns at this Voltage
E-R-1624/3S
$108.00
Voltage:
240
Size (Diameter):
Large- (.46" OD, 2004-Present)
Renaissance R1624 240 Volt/1 & 3 Phase Large Side and Back Wrap-Around Element (.46" Outside Diameter) - Used on All R1624 Kiln Sides and Backs at this Voltage
E-R-2427/2D
$72.00
Voltage:
208
Size (Diameter):
Large- (.46" OD, 2004-Present)
Renaissance R2427 208 Volt/1 & 3 Phase Large Door Element (.46" Outside Diameter) - Used on All R2427 Kilns at this Voltage
E-R-2427/2S
$149.00
Voltage:
208
Size (Diameter):
Large- (.46" OD, 2004-Present)
Renaissance R2427 208 Volt/1 & 3 Phase Large Side and Back Wrap-Around Element (.46" Outside Diameter) - Used on All R2427 Kiln Sides and Backs at this Voltage
E-R-2427/3D
$72.00
Voltage:
240
Size (Diameter):
Large- (.46" OD, 2004-Present)
Renaissance R2427 240 Volt/1 & 3 Phase Large Door Element (.46" Outside Diameter) - Used on All R2427 Kilns at this Voltage
E-R-2427/3S
$149.00
Voltage:
240
Size (Diameter):
Large- (.46" OD, 2004-Present)
Renaissance R2427 240 Volt/1 & 3 Phase Large Side and Back Wrap-Around Element (.46" Outside Diameter) - Used on All R2427 Kiln Sides and Backs at this Voltage
E-R-4900/10
$46.00
Voltage:
120
Size (Diameter):
Small (.38" OD, Prior 1996)
Pyrotech R490 115 Volt/1 Phase Element - Used on All R490 Kilns 
E-R-5000/10
$47.00
Voltage:
120
Size (Diameter):
Small (.38" OD, Prior 1996)
Pyrotech R500 115 Volt/1 Phase Element - Used on All R500 Kilns
E-R-5230/10
$47.00
Voltage:
120
Size (Diameter):
Small (.38" OD, Prior 1996)
Pyrotech R523 115 Volt/1 Phase Element - Used on All R523 Kilns
L-G-PILO/00
$32.00
Red Pilot Light - Unit is used for All Manual Kiln Control Panels 
M-V-RENA/PG
$61.00
This is made from a K25 brick. Dimensions for the plug portion are 3-1/2" by 1-1/2" by 6" long and for the top portion are 2-1/2" by 4-1/4" by 4". 
M-A-RGMD/PK
$7.00
10 Pack - Non-Insulated Medium Ring Terminal - Unit can accommodate up to 12-10 AWG. #10 Stud size. Used for Element Power & Ground Wire Ends that go onto the Element Terminals and for Ground Wires. (REF: E-TRM-233457-A1) Typical use is on 10 gauge power wires that go to elements. 
M-A-RGSM/PK
$7.00
10 Pack - Non-Insulated Small Ring Terminal - Unit can accommodate up to 16-14 AWG, for a #10 Stud. Used for 15 Amp & 20 Amp Power Cord Wire Leads and for some Ground Wires. (REF:E-TRM-14GRNG-A1) Note: Old version of part was blue-insulated, but that is not necessary when used on ground studs or element terminal studs. 
M-A-RNG6/PK
$7.00
M-A-RNG8/PK
$7.00
A-J-23RL/00
$350.00
L&L's rolling kiln stand features heavy gauge (14 ga) galvannealed steel construction with multiple bends for extra strength, swivel locking casters, integrated vent collection box support, and guide rails for the kiln. Each size is fitted to the kiln. 
A-J-29RL/00
$350.00
L&L's rolling kiln stand features heavy gauge (14 ga) galvannealed steel construction with multiple bends for extra strength, swivel locking casters, integrated vent collection box support, and guide rails for the kiln. Each size is fitted to the kiln. 
A-J-14RL/00
$350.00
L&L's rolling kiln stand features heavy gauge (14 ga) galvannealed steel construction with multiple bends for extra strength, swivel locking casters, and guides for the kiln. Each size is fitted to the kiln. 
A-J-18RL/00
$350.00
L&L's rolling kiln stand features heavy gauge (14 ga) galvannealed construction with multiple bends for extra strength, swivel locking casters, integrated vent collection box support, and guide rails for the kiln. Each size is fitted to the kiln. 
M-G-CNDR/00
$4.80
#8 Safety Chain - Unit is sold by the foot 
M-G-SAFE/CN
$52.00
Complete Safety Chain Assembly - Assembly includes the Safety Chain, Snap Clip, Screw Hook, and any Hardware 
M-G-HOOK/00
$4.80
Screw Hook for the Safety Chain System - Unit should be screwed into a wall behind the kiln to attach the Safety Chain to when the Kiln Lid is open 
M-G-SNAP/00
$4.80
Snap Clip for the Safety Chain System - Unit should be attached to the end of the Safety Chain to hook onto the Screw Hook 
L-S-SM1P/00
$1,255.00
Complete School-Master Control Panel with all Components and Wiring up to but not including the Element Connection Terminal Blocks - Unit is used with Three Section School-Master Kilns at 208 Volts or 240 Volts and 1 Phase Power. Includes Genesis Mini control. 
L-S-SM3P/00
$1,255.00
Complete School-Master Control Panel with all Components and Wiring up to but not including the Element Connection Terminal Blocks - Unit is used with Three Section School-Master Kilns at 208 Volts or 240 Volts and 3 Phase Power. Includes Genesis Mini control. 
S-S-CTBX/00
$128.00
Control Top Box for School-Master Kilns - Unit has a corrosion resistant powder coated finish, comes with Mounting Hardware, and is used with All School-Master Kilns |
©2025 L&L Kiln Mfg Inc
https://hotkilns.com/pottery-kiln-parts/metal/e23t-208v-3-phase-large-element
