June 20, 2025

SHOP KILN PARTS

<< Back to all categories
Custom Control Wire - Cut and Terminated
L-G-CUST/CT
$13.00

This is a custom, made-to-order wire. Upon order, please specify:

  1. LENGTH (inches)
  2. WIRE GAUGE (all control wire is 16ga, approximately 1/8" outside-diameter)
    16 AWG wire
  3. TERMINAL (if any) on either end of the wire. These are the options:
    control wire terminal connectors
  4. COLOR (we will try our best to match)
Custom Power Wire - Cut and Terminated
L-G-CUST/PW
$16.00

This is a custom, made-to-order wire. Upon order, please specify:

  1. LENGTH (inches)
  2. WIRE GAUGE - measure your wire and refer to the following ranges of outer diameters:
    power wire gauge
  3. TERMINAL (if any) on either end of the wire. These are the options:
    power wire terminals
  4. COLOR (we will try our best to match, but cannot guarantee)
Custom Thermocouple Wire - TYPE-K - Cut and Terminated
L-G-CUST/TK
$20.00

This is a custom, made-to-order wire. Upon order, please specify:

  1. LENGTH (inches)
  2. TERMINAL (if any) on either end of the wire. These are the options: 
    Type K TC Connectors
  3. Please confirm you are looking for YELLOW, Type-K TC wire
Custom Thermocouple Wire - TYPE-S - Cut and Terminated
L-G-CUST/TS
$20.00

This is a custom, made-to-order wire. Upon order, please specify:

  1. LENGTH (inches)
  2. TERMINAL (if any) on either end of the wire. These are the options: 
    Type S TC Connectors
  3. Please confirm you are looking for GREEN, Type-S TC wire
D18S & D18T 208V 1 Phase Large Element
E-D-18SL/21
$70.00
Voltage:
208
Size (Diameter):
Large- (.46" OD, 2004-Present)

Dura-Fire D18S and D18T 208 Volt/1 Phase Large Element (.46" Outside Diameter) - Used on All D18S & D18S-3 Kilns at this Voltage and Phase

D18S & D18T 240V 1 Phase Large Element
E-D-18SL/31
$70.00
Voltage:
240
Size (Diameter):
Large- (.46" OD, 2004-Present)

Dura-Fire D18S and D18T 240 Volt/1 Phase Large Element (.46" Outside Diameter) - Used on All D18S & D18S-3 Kilns at this Voltage and Phase

D23S 208V 1 Phase Large Element
E-D-23SL/21
$70.00
Voltage:
208
Size (Diameter):
Large- (.46" OD, 2004-Present)
Dura-Fire D23S 208 Volt/1 Phase Large Element (.46" Outside Diameter) - Used on All D23S & D23S-3 Kilns at this Voltage and Phase
D23S 240V 1 Phase Large Element
E-D-23SL/31
$70.00
Voltage:
240
Size (Diameter):
Large- (.46" OD, 2004-Present)
Dura-Fire D23S 240 Volt/1 Phase Large Element (.46" Outside Diameter) - Used on All D23S & D23S-3 Kilns at this Voltage and Phase
D23T 208V 1 Phase Large Element
E-D-23TL/21
$70.00
Voltage:
208
Size (Diameter):
Large- (.46" OD, 2004-Present)
Dura-Fire D23T 208 Volt/1 Phase Large Element (.46" Outside Diameter) - Used on All D23T & D23T-3 Kilns at this Voltage and Phase
D23T 240V 1 Phase Large Element
E-D-23TL/31
$70.00
Voltage:
240
Size (Diameter):
Large- (.46" OD, 2004-Present)
Dura-Fire D23T 240 Volt/1 Phase Large Element (.46" Outside Diameter) - Used on All D23T & D23T-3 Kilns at this Voltage and Phase
D28S 208V 1 Phase Large Element
E-D-28SL/21
$70.00
Voltage:
208
Size (Diameter):
Large- (.46" OD, 2004-Present)
Dura-Fire D28S 208 Volt/1 Phase Large Element (.46" Outside Diameter) - Used on All D28S-3 Kilns at this Voltage and Phase
D28S 240V 1 Phase Large Element
E-D-28SL/31
$70.00
Voltage:
240
Size (Diameter):
Large- (.46" OD, 2004-Present)
Dura-Fire D28S 240 Volt/1 Phase Large Element (.46" Outside Diameter) - Used on All D28S-3 Kilns at this Voltage and Phase
D28T 208V 1 Phase Large Element
E-D-28TL/21
$70.00
Voltage:
208
Size (Diameter):
Large- (.46" OD, 2004-Present)
Dura-Fire D28T 208 Volt/1 Phase Large Element (.46" Outside Diameter) - Used on All D28T-3 Kilns at this Voltage and Phase
D28T 240V 1 Phase Large Element
E-D-28TL/31
$70.00
Voltage:
240
Size (Diameter):
Large- (.46" OD, 2004-Present)
Dura-Fire D28T 240 Volt/1 Phase Large Element (.46" Outside Diameter) - Used on All D28T-3 Kilns at this Voltage and Phase
Davinci Control Panel - Five 50 Amp Circuits with Branch Fusing, 1 Phase
L-X-P500/21
$2,940.00

Automatic Control Panel with five 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).

The stand is not included (order it here).

All panels this size are directly wired and do not include a power cord.

This is used with all Five CIrcuit DaVinci X2845, XB2845, X3245, XB3245, T2345, TB2345, T3445, and TB3445 Kilns at 208 Volts or 240 Volts and 1 Phase Power.

Davinci Control Panel - Five 50 Amp Circuits with Branch Fusing, 3 Phase
L-X-P500/22
$2,940.00

Automatic Control Panel with five 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).

The stand is not included (order it here).

All panels this size are directly wired and do not include a power cord.

This is used with all Five CIrcuit DaVinci X2845, XB2845, X3245, XB3245, T2345, TB2345, T3445, and TB3445 Kilns at 208 Volts or 240 Volts and 3 Phase Power.

Davinci Control Panel - Four 50 Amp Circuits with Branch Fusing, 1 Phase
L-X-P400/21
$2,645.00

Automatic Control Panel with four 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).

The stand is not included (order it here).

All panels this size are directly wired and do not include a power cord.

This is used with all Four CIrcuit DaVinci X2836, XB2836, X3236, XB3236, T2336, TB2336, T3436, and TB3436 Kilns at 208 Volts or 240 Volts and 1 Phase Power.

Davinci Control Panel - Four 50 Amp Circuits with Branch Fusing, 3 Phase
L-X-P400/22
$2,645.00

Automatic Control Panel with four 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).

The stand is not included (order it here).

All panels this size are directly wired and do not include a power cord.

This is used with all Four CIrcuit DaVinci X2836, XB2836, X3236, XB3236, T2336, TB2336, T3436, and TB3436 Kilns at 208 Volts or 240 Volts and 3 Phase Power.

Davinci Control Panel - Six 50 Amp Circuits With Branch Fusing, 1 Phase
L-X-P600/21
$3,315.00

Automatic Control Panel with six 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).

The stand is not included (order it here).

All panels this size are directly wired and do not include a power cord.

This is used with all Six CIrcuit DaVinci X2845-PB, XB2845-PB, X3245-PB, XB3245-PB, T2345-PB, TB2345-PB, T3445-PB, TB3445, and some special pull-apart kilns at 208 Volts or 240 Volts and 1 Phase Power.

Davinci Control Panel - Six 50 Amp Circuits With Branch Fusing, 3 Phase
L-X-P600/22
$3,315.00

Automatic Control Panel with six 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).

The stand is not included (order it here).

All panels this size are directly wired and do not include a power cord.

This is used with all Six CIrcuit DaVinci X2845-PB, XB2845-PB, X3245-PB, XB3245-PB, T2345-PB, TB2345-PB, T3445-PB, TB3445, and some special pull-apart kilns at 208 Volts or 240 Volts and 3 Phase Power.

Davinci Control Panel - Three 50 Amp Circuits with Branch Fusing, 1 Phase
L-X-P300/21
$2,455.00

Automatic Control Panel with three 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).

The stand is not included (order it here).

All panels this size are directly wired and do not include a power cord.

This is used with all Three CIrcuit DaVinci X2827, XB2827, X3227, XB3227, T2327, TB2327, T3427, and TB3427 Kilns at 208 Volts or 240 Volts and 1 Phase Power.

Davinci Control Panel - Three 50 Amp Circuits with Branch Fusing, 3 Phase
L-X-P300/22
$2,455.00

Automatic Control Panel with three 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).

The stand is not included (order it here).

All panels this size are directly wired and do not include a power cord.

This is used with all Three CIrcuit DaVinci X2827, XB2827, X3227, XB3227, T2327, TB2327, T3427, and TB3427 Kilns at 208 Volts or 240 Volts and 3 Phase Power.

Davinci Control Panel - Two 50 Amp Circuits with Branch Fusing, 1 Phase
L-X-P200/21
$2,135.00

Automatic Control Panel with two 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).

The stand is not included (order it here).

All panels this size are directly wired and do not include a power cord.

This is used with all Two CIrcuit DaVinci XB2818, XB3218, XB3218, TB2318, and TB3418 Kilns at 208 Volts or 240 Volts and 1 Phase Power.

DaVinci Control Panel - Two 50 Amp Circuits with Branch Fusing, 3 Phase
L-X-P200/22
$2,135.00

Automatic Control Panel with two 50 Amp Plug-In Circuits and with Branch Fusing. Includes automatic control (DynaTrol or Genesis), panel, fuses, relays, mechanical power contactors, transformer, and all other internal components. Please specify Genesis or DynaTrol control (no cost difference).

The stand is not included (order it here).

All panels this size are directly wired and do not include a power cord.

This is used with all Two CIrcuit DaVinci XB2818, XB3218, XB3218, TB2318, and TB3418 Kilns at 208 Volts or 240 Volts and 3 Phase Power.

DaVinci Cord Connection Retrofit Kit
L-G-DVCC/KT
$64.00

This is a set of components to move the cord connections on a DaVinci kiln ring to the outer element connection box.

The kit consists of:

  1.  (1) Two Pole Terminal
  2.  (1) Insulating board
  3.  (2) Terminal Mounting Screws (#8 X 3/4" A Type 
  4.  (2) #10 SS nuts
  5.  (2) #10 SS washers
  6.  (2) #10 SS split washers
  7.  (1) #10 X 1/2" Self-Tapping screw (ground screw)
  8.  (1) #10 star washer (for the ground screw)
  9.  (1) Ground Symbol Sticker
  10.  (1) 12" length of wire insulator sleaving for covering the cord wires (this gets cut to length to slip over the cord wires - may be WHITE or BLACK)
  11.  (2) 8 Gauge 150 Deg C, 9" long Power Wires with a ring terminal to mount to the element connection and a stripped end to go in the new terminal block
DaVinci Counterbalance Component - 1/8" Cable
M-X-CABL/00
$47.00

DaVinci Counterbalance System Cable - Unit is an 8' Long length of 1/8" Diameter Aircraft Cable used to attach the Counterbalance Spring to the Threaded "C" Clamp

DaVinci Element Cover Box
S-G-ECBX/XT
$72.00

Element Cover Box for All DaVinci Kilns - Unit includes Mounting Hardware (4 sheet metal screws)

DaVinci Instruction Manual
M-X-MANL/00
$38.00

In a 3-ring binder. For kilns with the Genesis control (DynaTrol instructions can be downloaded).

You need to specify which control you have and your model number and serial number so we can provide the proper wiring diagram and control instructions.

You can download the free PDF here. This has both the DynaTrol and Genesis instructions. You can control service@hotkilns.com to get your wiring diagram. You will need your exact model number and wiring diagram.

DaVinci Kiln Sidebrick for Quad Elements- No Element Holders
F-Q-DV03/NH
$22.50

Sidebrick for All DaVinci Kilns without Element Holders - Unit includes one 3" Brick with four grooves but no Element Holders. For Quad element options. Also used on e2318-XT, e2327-XT, e2818-XT & e2827-XT kilns that have Quad elements.