Easy-Fire Pottery Kilns

Easy-Fire Pottery Kilns

Home> All L&L Kiln Series> Easy-Fire Pottery Kilns
KILN:

e18T-3 Pottery Kiln

Flagship Multi-Purpose Kiln

KILN:

e18T-3 Pottery Kiln

Flagship Multi-Purpose Kiln

    KEY SPECS
  • Small
    (3.7 cubic feet)
  • Genesis Multi-Zone Touchscreen Control
  • Cone 10, 2350F, 1290C
$3,800
ESTIMATED LEAD TIME: 6 to 8 Weeks
See Lead Times & Confirmation Process
WHERE TO BUY
Spec Sheet Drawing Instructions

Model e18T-3 Easy-Fire Automatic Kiln with Multi-Program Three-Zoned Genesis Touchscreen control mounted in an easy-open, cool-firing, piggyback control panel that is angled for easy viewing of control. Kiln comes with hard ceramic element holders, protected thermocouples, a strong solid-top stand, and solid peephole plugs. 16-1/2" diameter by 27" high (3.7 cubic ft - 105 Liters). 3" K23 brick. NEMA 6-50 single phase or 15-50 three phase 6 foot power cord included. There are three thermocouples. No charge for 3-phase versions. C-MET-us listed in the USA & Canada. Cone 10 for all voltages. 

All Easy-Fire Kilns include Genesis Touchscreen Multi-Zone Control

Furniture Kit for e18T-3 & JD18X-3 (3" brick)
  • Part Number:
    H-E-K18T/30
  • Includes: Two 15" Full Round Shelves and Four 15" Half Round Shelves (5/8" thick), Six each of 1/2", 1", 2", 4", 6", & 8" high 1-1/2" Square Ceramic Posts, and One Pair Heat Resistant Gloves
  • Price:
    $515.00
  • Insulation:
    3" K23 Firebrick
  • Sections:
    Three 9" high sections
  • Inside Dimensions:
    16.50"
    Diameter x
    27.00"
    High (41.91 cm Diameter x 68.58 cm High)
  • Outside Dimensions:
    28.00"
    Wide x
    30.00"
    Deep x
    63.00"
    High (71.12 cm Wide x 76.2 cm Deep x 160.02 cm High)
  • Weight:
    230
    lbs (104 kg)
SKU Model Number Watts Volts Phase Fuse Size
K-E-18T3/21 e18T-3-208-1Ph 8,400 208 Single Phase 60 Amp
  • Additional Information
  • Amps: 40.4
  • Wire Connection: NEMA 6-50 1 Phase Plug with six foot cord. Neutral is not used. (Kiln may be direct wired without affecting the MET listing)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Not Branch Fused
  • Element Wiring: Series
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-E-18T3/22 e18T-3-208-3Ph 8,400 208 Three Phase (Delta) 30 Amp
  • Additional Information
  • Amps: 23.3
  • Wire Connection: NEMA 15-50 3 Phase Plug with six foot cord. Neutral is not used. (Kiln may be direct wired without affecting the MET listing)
  • Wire Gauge for Connection: 10 Ga
  • Branch Fusing: Not Branch Fused
  • Element Wiring: Series
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-E-18T3/31 e18T-3-240-1Ph 8,400 240 Single Phase 50 Amp
  • Additional Information
  • Amps: 35
  • Wire Connection: NEMA 6-50 1 Phase Plug with six foot cord. Neutral is not used. (Kiln may be direct wired without affecting the MET listing)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Not Branch Fused
  • Element Wiring: Series
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-E-18T3/32 e18T-3-240-3Ph 8,400 240 Three Phase (Delta) 30 Amp
  • Additional Information
  • Amps: 20.2
  • Wire Connection: NEMA 15-50 3 Phase Plug with six foot cord. Neutral is not used. (Kiln may be direct wired without affecting the MET listing)
  • Wire Gauge for Connection: 10 Ga
  • Branch Fusing: Not Branch Fused
  • Element Wiring: Series
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-E-18T3/41 e18T-3-220-1Ph 8,400 220-230 Single Phase 50 Amp
  • Additional Information
  • Amps: 38.2
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Not Branch Fused
  • Element Wiring: Series
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-E-18T3/52 e18T-3-380-3PY 8,400 380 Three Phase (Wye) 20 Amp
  • Additional Information
  • Amps: 12.7
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 14 Ga
  • Branch Fusing: Not Branch Fused
  • Element Wiring: Series
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-E-18T3/82 e18T-3-400-3PY 9,539 400 Three Phase (Wye) 20 Amp
  • Additional Information
  • Amps: 13.8
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 14 Ga
  • Branch Fusing: Not Branch Fused
  • Element Wiring: Series
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-E-18T3/72 e18T-3-415-3PY 8,400 415 Three Phase (Wye) 10 Amp
  • Additional Information
  • Amps: 11.7
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 14 Ga
  • Branch Fusing: Not Branch Fused
  • Element Wiring: Series
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):

Control

Genesis Touch Screen Control
The Genesis control includes a touchscreen interface and WIFI connectivity. The intuitive interface is easy to use and understand. A free phone app allows you to monitor your kiln remotely.
Automatic Zone Control
EVEN FIRING. MAKES LOADING MORE FLEXIBLE. ADJUSTS FOR ELEMENT AGING. No need to pay extra for this important feature! Zone control on an electric kiln gives you the utmost controllable temperature uniformity. The kiln control separately measures temperatures in the bottom, middle, and top of the ceramic kiln and automatically adjusts the heat output of three kiln zones during the entire glaze or bisque firing.
Angled Control Panel
EASY TO SEE AND PROGRAM THE CONTROL. Angled control panel makes viewing control and programming easier.

Serviceability

Easy to Remove & Service Control Panel
THIS IS THE SAFEST AND EASIEST KILN TO WORK ON. The Control panel pulls down easily and remains perpendicular to the element box for very easy access. All wiring is neatly laid out in a professional and industrial way with color coding and numbering for easy repair and troubleshooting. Best of all the double panel design results in cooler panels and longer control and relay life.
Sectional Kiln Construction (Most L&L Kilns)
EASY TO MOVE ANYWHERE. Sectional kiln construction makes kilns easy to move, set up and disassemble for maintenance.

Durability

Protected Thermocouples
KEEP YOUR WORK CLEAN. Ceramic protection tubes protect the end of the thermocouple. Keeps the oxide dust from the thermocouple tip from getting into the kiln while firing.
Heavy-Duty Type K Thermocouples
HEAVY-DUTY. Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
Hard Ceramic Element Channels
NO PINS TO REPLACE AND DAMAGE YOUR FIREBRICK! Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
Solid Wide-View Peephole Plugs
STOP BREAKING PEEPHOLE PLUGS. Solid large non-tapered peepholes allow a wider view into the kiln. The peephole plugs are made from solid ceramic and are not as fragile as hollow-type plugs used on competitors' kilns.
"No Crimp" Ceramic Element Connections
NO CRIMPING! EASY TO CHANGE. Industrial-grade ceramic terminal blocks make changing elements easy. All contact between elements and wire lugs is over a wide surface of heavily torqued stainless steel washers. Wires are not crimped to element ends as in some other brands. This means you can change elements yourself without buying an expensive tool or hiring a kiln repair person.
Full-Support Stand
FULL SUPPORT STAND. Aluminized stands are solid and corrosion-resistant. They offer solid support under the kiln - unlike spot-welded angle stands that are common in the industry.
Corrosion Resistant Case
KEEP YOUR KILN LOOKING NEW. Corrosion resistant materials and methods result in a long-lasting kiln.

Ease of Use

Simple Strong Hinge with Wide-Angle Opening
ALL STAINLESS HINGE FOR SMALLER KILNS. This is used on top-loading kilns that are 8-sided or less

Support

Three-Year Limited Warranty (Standard)
THIS IS REALLY IMPORTANT WHEN YOU CONSIDER THE ELECTRONIC CONTROL. Most L&L Kilns have a three-year limited warranty.
Superior Technical Support
LET OUR EXPERIENCE WORK FOR YOU. The combined experience at L&L Kilns in kilns, ceramics, electrical engineering, and process engineering is unsurpassed. We work as a team to help you get your answers and help.
Visual Instruction Manual
LIKE HAVING A KILN LIBRARY AT YOUR FINGERTIPS. The combined experience at L&L Kilns in kilns, ceramics, electrical engineering, and process engineering is unsurpassed. We provide a visual parts list with photographs, part numbers, prices, and helpful information to reduce confusion when ordering parts. We also include well-vetted information and wisdom from our industry partners to ensure our customers have access to all the basic information necessary to be successful from the first firing.

Safety

Listed to UL499 Standard by MET
CERTIFIED SAFE. Most L&L kilns are MET listed to UL499 standards. Listed kilns include Easy-Fire Pottery Kilns, eQuad-Pro Professional Kilns, eFL Front-Loading Kilns, Jupiter Sectional Kilns, DaVinci Square & Rectangular Production Kilns, School-Master School Kilns, Fuego Home Craft Kilns, and Doll-Test Kilns. Easy-Load Production Front-Loading kilns are MET-Us Listed for the USA only.

Controls

Genesis Touch Screen Control
The Genesis control includes a touchscreen interface and WIFI connectivity. The intuitive interface is easy to use and understand. A free phone app allows you to monitor your kiln remotely.
DynaTrol Keypad Control
Traditional 24-button Keypad control. This control can be substituted for any Genesis full-sized control.

Thermocouples

Type S Platinum Thermocouples
Type S Platinum Thermocouples are recommended for high fire applications. NOTE: Price of upgrade is per each thermocouple.
Pyrocil Metal Sheathed Industrial Thermocouples
Pyrocil thermocouples are sensitive but limited to about 2200°F but offer greater sensitivity to temperature change and so may be appropriate in applications below 2200°F that require sensitivity. NOTE: Price of upgrade is per each thermocouple.

Miscellaneous

Rolling Kiln Stand
L&L's rolling kiln stand features heavy gauge galvannealed steel construction with multiple bends for extra strength, steel swivel locking casters, integrated vent collection box support, and guide posts for the kiln. Each size is fitted to the kiln.

Vents

Vent-Sure Downdraft Kiln Vent System
A Critical component in the longevity of your kiln!The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln.
Vent Control Programmed on Genesis & DynaTrol
The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis).
Vent Doubler System
The Vent Doubler allows you to use one vent on two kilns.

Kiln Furniture

Furniture Kits
Kiln furniture kits are the recommended set of ceramic shelves, posts and kiln wash that go with each kiln model. These are for loading the work in the kiln.
Safety Gloves
These safety gloves are perfect for handling hot work when unloading a kiln.

Power

120 Volt Power Supply & Electrical Noise Filter For Automatic Kilns
This option helps protect your control from electrical noise

Shipping/Crating

Crating Charges and Export Options for Standard Kilns
Export crates, ISPM-15 Skids for export, and special pallet designs for unloading Easy-fire kilns without a forklift.

Elements

Quad Element Option
The combination of 1/2" diameter element coils, the doubled surface area of the Quad element design, and superior heat transfer of L&L's patented ceramic element holders, make this the best element system in the world today.
  • Kiln:
    48 IN Wide X 40 IN Deep X 48 IN High
    (
    122 CM Wide X 102 CM Deep X 122 CM High
    )
  • Ship Weight:
    280
    lbs (127 kg)
  • Kiln with Furniture Kit:
    48 IN Wide X 40 IN Deep X 61 IN High
    (
    122 CM Wide X 102 CM Deep X 155 CM High
    )
  • Ship Weight:
    325
    lbs (147 kg)
  • Kiln with Vent:
    48 IN Wide X 40 IN Deep X 61 IN High
    (
    122 CM Wide X 102 CM Deep X 155 CM High
    )
  • Ship Weight:
    295
    lbs (134 kg)
  • Kiln with Vent and Furniture Kit:
    48 IN Wide X 40 IN Deep X 61 IN High
    (
    122 CM Wide X 102 CM Deep X 155 CM High
    )
  • Ship Weight:
    340
    lbs (154 kg)
  • Packaging:
    Skidded Carton with Foam-in-Place packaging

Turntable View

e18T-3 Pottery Kiln
Compare L&L Kilns
JD18X-3 Electric Kiln JD18-3 Electric Kiln e23S-JH Crystalline Kiln e23S-3 Pottery Kiln
Kiln JD18X-3 Electric Kiln JD18-3 Electric Kiln e23S-JH Crystalline Kiln e23S-3 Pottery Kiln
Description

Plug-In Sectional Kiln

Plug-In Sectional Kiln

For Chrystalline Glazing

Flagship Multi-Purpose Kiln
Price $4,125.00 $2,950.00 $5,250.00 $3,975.00
Type
Volume 3.7 cubic feet 2.5 cubic feet 4.7 cubic feet 4.4 cubic feet
Temperature Cone 10, 2350F, 1290C Cone 10, 2350F, 1290C Cone 12, 2400F, 1315C Cone 10, 2350F, 1290C