December 3, 2024
|
|---|
SHOP KILN PARTS
L-G-HE3C/P3
$54.00
Power Wire Harness - Set of wires is precut, terminated, and labeled to run from the Power Connection Block to the Power Relays on all Easy-Fire and School-Master Kilns with three sections at any voltage and 3 phase power. There are six wires in a set. 
L-G-HEMD/PR
$17.75
Set of wires is precut, terminated, and labeled to run from the Bottom Element Terminal Block to the Power Terminal Strip on all Two Section kilns, or from the Middle Element Terminal Block to the Power Terminal Strip on all Three Section Easy-Fire and School-Master Kilns. There are two wires in a set. Note: This is wire #3 and #4.
L-G-HEBM/PR
$17.75
Set of wires is precut, terminated, and labeled to run from the Bottom Element Terminal Block to the Power Terminal Strip on All Three Section Easy-Fire and School-Master Kilns. There are two wires per set. Note: This is wire #5 and #6.
L-G-HE2C/P1
$35.00
Power Wire Harness - Set of wires is precut, terminated, and labeled to run from the Power Connection Block to the Power Relays on all Easy-Fire Kilns with two sections at any voltage and 1 Phase Power. There are four wires per set. 
L-G-HE3C/PR
$54.00
Power Wire Harness - Set of wires is precut, terminated, and labeled to run from the Power Terminal Strip to the Power Relays on All Easy-Fire and School-Master Kilns with three sections at any voltage and phase power. There are six wires in a set. 
L-G-HE2C/PR
$35.00
Power Wire Harness - Set of wires is precut, terminated, and labeled to run from the Power Terminal Strip to the Power Relays on all Easy-Fire Kilns with two sections at any voltage and 1 Phase Power. There are four wires in a set. 
L-G-HETP/PR
$17.75
Set of wires is precut, terminated, and labeled to run from the Top Element Terminal Block to the Power Terminal Strip on All Easy-Fire and School-Master Kilns. There are two wires per set. Note: This is wire #1 and #2.
L-G-PILO/00
$31.00
Red Pilot Light - Unit is used for All Manual Kiln Control Panels 
M-A-FORK/SM
$1.40
Blue Insulated Small Fork Terminal - Unit is a Spade Fork, can accommodate up to 16-14 AWG. Fits on a #8 stud. It is used on Older 4-Way Switches. (REF: E-TRM-320862-A3) 
M-A-RING/SM
$0.70
Non-Insulated Small Ring Terminal - Unit can accommodate up to 16-14 AWG, for a #10 Stud. Used for 15 Amp & 20 Amp Power Cord Wire Leads and for Ground Wires. (REF:E-TRM-14GRNG-A1) Note: Old version of part was blue-insulated, but that is not necessary when used on ground studs or element terminal studs. 
M-A-SPAK/00
$4.20
Set of Spade Wire Terminals that are used to connect wires to the 4-Way Arkless Input Switch. 
M-A-SP00/00
$3.45
Set of Spade Wire Terminals that are used to connect wires to the Robert Shaw INF Infinite Input Switch. 
L-G-SNUT/00
$0.95
#10-24 Stainless Steel Hex Nut - Unit is used for mounting the Vent Bypass Box and Contactor Plates and for the Element Terminal Bolts 
L-G-TRTC/EF
$30.00
Thermocouple Terminal Strip - Unit has Six 3/16" Spade Terminals on each side, comes with a Terminal Strip Marker Board and is used for the Thermocouple Wires on piggybacked Control Panels 
L-G-WR16/BL
$1.85
Green 16 Gauge Wire, rated to 105C, cut to length specified by customer, and terminated with terminals specified by customer. See this web page for instructions on how to specify the wire you need. 
L-G-WR16/BU
$1.85
Green 16 Gauge Wire, rated to 105C, cut to length specified by customer, and terminated with terminals specified by customer. See this web page for instructions on how to specify the wire you need. 
L-G-WR16/BN
$1.85
Green 16 Gauge Wire, rated to 105C, cut to length specified by customer, and terminated with terminals specified by customer. See this web page for instructions on how to specify the wire you need. 
L-G-WR16/GY
$1.85
Green 16 Gauge Wire, rated to 105C, cut to length specified by customer, and terminated with terminals specified by customer. See this web page for instructions on how to specify the wire you need. 
L-G-WR16/GR
$1.85
Green 16 Gauge Wire, rated to 105C, cut to length specified by customer, and terminated with terminals specified by customer. See this web page for instructions on how to specify the wire you need. 
L-G-WR16/NG
$1.85
Green 16 Gauge Wire, rated to 105C, cut to length specified by customer, and terminated with terminals specified by customer. See this web page for instructions on how to specify the wire you need. 
L-G-WR16/PL
$1.85
Green 16 Gauge Wire, rated to 105C, cut to length specified by customer, and terminated with terminals specified by customer. See this web page for instructions on how to specify the wire you need. 
L-G-WR16/WT
$1.85
Green 16 Gauge Wire, rated to 105C, cut to length specified by customer, and terminated with terminals specified by customer. See this web page for instructions on how to specify the wire you need. 
L-G-WR10/WT
$4.35
White 10 Gauge High Temperature Wire, rated to 150C, cut to length specified by customer, and terminated with terminals specified by customer. See this web page for instructions on how to specify the wire you need. 
L-G-WR10/GR
$4.35
Green 10 Gauge High Temperature Wire (made to order) is no longer available. Please use 10 ga white wire. See this web page for instructions on how to specify the wire you need. 
L-G-WR14/BL
$3.60
Black 14 Gauge High Temperature Wire, rated to 150C, cut to length specified by customer, and terminated with terminals specified by customer. See this web page for instructions on how to specify the wire you need. 
L-G-WR14/RD
$3.60
Red 14 Gauge High Temperature Wire, rated to 150C, cut to length specified by customer, and terminated with terminals specified by customer. See this web page for instructions on how to specify the wire you need. 
L-G-WR06/GR
$7.30
Green 6 Gauge High Temperature Wire, rated to 150C, cut to length specified by customer, and terminated with terminals specified by customer. See this web page for instructions on how to specify the wire you need. 
L-G-WSRT/EQ
$60.00
This includes 6 high-temperature power wires that connect the terminal strip inside the panel to the elements. All terminals are included as an assembly. All wires are white. 
L-G-SLVD/BK
$10.15
NO IMAGE
Black 10 Gauge High Temperature Wire is no longer available. Please use 10 ga white wire. NO IMAGE
L-G-JMP6/10
$19.75
10 Gauge Jumper Wire - Unit is 8" Long with two Ring Terminals. This is used as a jumper wire from one terminal bolt to another. The color is white. 
L-G-JMP8/10
$17.75
14 Gauge Ground Wire - Unit is 8" Long and includes Insulation Sleaving, one Ring Terminal, and one Fork Terminal 
L-G-WR14/GR
$3.60
Green 14 Gauge High Temperature Wire, rated to 150C, cut to length specified by customer, and terminated with terminals specified by customer. See this web page for instructions on how to specify the wire you need. 
L-G-WR06/BL
$7.30
Black 6 Gauge High Temperature Wire, rated to 150C, cut to length specified by customer, and terminated with terminals specified by customer. See this web page for instructions on how to specify the wire you need. |
©2024 L&L Kiln Mfg Inc
https://hotkilns.com/pottery-kiln-parts/wiring
