Door Activated Element Shut-Off Limit Switch for Easy-Load & Hercules Includes wire that goes to control panel.

40 Amp Element Power Cut Off Switch - Unit is used with Easy-Fire EU kilns and Positive Door Interlock Switch (European Style) Option

15 Amp Element Power Cut Off Microswitch - Unit is used with All Fuego and Robin Kilns at any Voltage and Phase Power

240 Volt Infinite Zone Switch - Unit includes a Mounting Nut. This can be used for both 240V and 208V Kilns.

NOTE: Often a switch, when it burns out, exhibits overheating on the switch body at one of the spade electrical connection points. When this occurs, the mating connector on the wire may not give good electrical contact if refused. To reduce the possibility of overheating at this point on the new switch, we recommend replacing the female connector and the wire attached to it. If the switch body looks O.K. then do not replace the female wire connectors.

Troubleshooting An INF Swtich

NOTE CONCERNING 208V SWITCHES

When used on a 208 volt kiln the timing of th heater will be slightly different than when used on a 240 volt kiln. We no longer supply 208 volt switches.

On/Off Toggle Switch - Unit is used to switch the Control Board on and off on All Automatic Kilns

Toggle Switch Legend Plate - Unit is used in conjunction with All On/Off Toggle Switches