NO IMAGE
July 12, 2026
|
|---|
SHOP KILN PARTSPottery Kiln Thermocouples
T-G-PLUG/KS
$13.75
When you need to convert your kiln from Type K to Type S thermocouples, this plug is cemented into the larger hole we use for our Type K thermocouples with protection tubes.
T-G-OPTB/00
$50.00
Mullite Thermocouple Protection Tube - Unit is 5" Long x 1" Diameter with a stepped head for use with All Standard Length Type-K 8 Ga. Thermocouples. NOTE: This is the newer type open end tube which was put in service with new kilns starting in September 2020. 
T-G-TUBE/07
$66.00
Mullite Thermocouple Protection Tube - Unit is 7" Long x 1" Diameter with a stepped head for use with all Longer Length Type-K 8 Ga. Thermocouples. NOTE: This is the newer type open end tube which was put into service for new kilns starting in November 2020. 
T-G-MKIT/00
$10.65
Mounting Kit for Type-K 8 Gauge Thermocouples - Kit includes two #6 1-1/2" Screws, one 1/4" thick Ceramic Spacer. 
L-G-TRTC/EF
$33.00
Thermocouple Terminal Strip - Unit has Six 3/16" Spade Terminals on each side, comes with a Terminal Strip Marker Board and is used for the Thermocouple Wires on drop-down Control Panels
L-G-TCPK/FM
$27.00
L-G-TCPSFM
$27.00
L-G-TCPK/ML
$27.00
L-G-TCPS/ML
$27.00
T-G-E807/00
$65.00
Type-K 8 Gauge Thermocouple (Exposed) with Ceramic Terminal Block - Unit is 6-1/2" Long x 1/2" Diameter 
T-G-E800/EL
$26.50
Type-K 8 Gauge Thermocouple (Exposed) with Element ONLY - no Terminal Block - Metal element is 6" Long with a 4" long ceramic insulator tube that is 1/2" diameter. The negative wire is marked with red. This is meant for kilns with 2.5", 3", or 3.5" insulation (brick + backup insulation if present).
T-G-E800/00
$55.00
Type-K 8 Gauge Thermocouple (Exposed) with Ceramic Terminal Block - Ceramic tube is 4" Long x 1/2" Diameter. 
T-G-E23M/05
$117.00
Type-K Industrial Grade Pyrosil Sheathed Thermocouples with Ceramic Terminal Block - Unit is 5" Long x 1/4" Diameter. Used on DaVinci, Jupiter, Easy-Fire and other kilns with 2-1/2" or 3" brick walls.
T-G-E23M/06
$117.00
Type-K Industrial Grade Pyrosil Sheathed Thermocouples with Ceramic Terminal Block - Unit is 6-1/2" Long x 1/4" Diameter. Used on Hercules and Easy-Load kilns where wall thickness is 5". 
T-G-SXXX/00
$385.00
Type S Platinum Thermocouple with Alumina Protection Tube and Terminal Block - Unit is 120 mm (4-3/4") Long x 1/4" Diameter. Used on JH Series kilns (as standard), optional on Easy-Fire, Jupiter, DaVinci, eFL Series, Easy-Fire XT, Bell-Lift, Doll) 
T-G-S180/08
$470.00
Type S Platinum Thermocouple with Alumina Protection Tube and Terminal Block - Unit is 180 mm (7") Long x 1/4" Diameter. Used on Easy-Load kilns where wall thickness is 5". |
