B-Model B23 & BA23 240 Volt/1 & 3 Phase Graded "#2" Element - Used on All B23, B23C, BA23, & BA23C Kilns at this Voltage (Refer to Wiring Diagram for Element Placement).
IMPORTANT NOTE: If you need to replace elements on a B Series kiln then all elements must be replaced at one time.
- Electrical
- Voltage:
240
- Size (Diameter):
Small (.38" OD, Prior 1996)
- Tips
There are two #1 (Top and Bottom) elements per kiln.
There are two #2 (One down from the Top and one down from the Bottom) elements per kiln.
There are two #3 (Center) elements per kiln.
The three types each have a different resistance (ohms).
When changing elements, you should look at your element terminals and consider changing all of the hardware if there is any oxidation. You will get a 50% discount on the terminal hardware if you order a complete set of elements. The terminal hardware set for this kiln is here.
- Ordering
- Part Number:
E-B-23A2/30
- Price:
$105.00/Each
- Lead Time:
Standard elements are 2 to 7 days but are dependent on material availability
- Return Policy:
Part is special order or made to order and is not returnable.
