B14 240V Element
Description
B-Model B14 240 Volt/1 & 3 Phase Non-Graded Element - Used on All B14 & B14C Kilns at this Voltage (Refer to Wiring Diagram for Element Placement).
IMPORTANT NOTE: If you need to replace elements on a B Series kiln then all elements must be replaced at one time.
- Electrical
- Voltage:
240
- Size (Diameter):
Small (.38" OD, Prior 1996)
- Tips
There are 4 of these elements per kiln. All elements have the same resistance (ohm) value.
When changing elements, you should look at your element terminals and consider changing all of the hardware if there is any oxidation. You will get a 50% discount on the terminal hardware if you order a complete set of elements. The terminal hardware set for this kiln is here.
- Ordering
- Part Number:
E-B-1400/30
- Price:
$88.00/Each
- Lead Time:
Standard elements are 2 to 7 days but are dependent on material availability
- Return Policy:
Part is special order or made to order and is not returnable.
