B-Model B14 208 Volt/1 & 3 Phase Non-Graded Element - Used on All B14 & B14C Kilns at this Voltage (Refer to Wiring Diagram for Element Placement).
IMPORTANT NOTE: If you need to replace elements on a B Series kiln then all elements must be replaced at one time.
- Size (Diameter):
Small (.38" OD, Prior 1996)
There are 4 of these elements per kiln. All elements have the same resistance (ohm) value
- Part Number:
- Lead Time:
Standard elements are 2 to 7 days but are dependent on material availability
- Return Policy:
Part is special order or made to order and is not returnable.