Video Support

This video provides a step-by-step walkthrough for assembling an L&L Kilns EFL Series Front-Loading Kiln, using the EFL 2635 model as an example. The kiln ships in several components, including the kiln body, leg assemblies, and the control panel. This guide highlights the key steps to get your kiln safely installed and ready for electrical hookup.

Begin by placing the kiln in its installation area. Remove the plastic wrap from the kiln body while someone supports the door. Take out the internal support box and foam—these are for shipping only and may be discarded.

Remove the factory-installed bolts at the hinge points. Lift the door into place and rest it on the lower brackets. Align the hinges with the bolt holes.

• Ensure the hinge bushings sit flush between the door and brackets.
• If gaps appear, use the included washers to eliminate spacing.
  Secure

In this video we will demonstrate how to assemble the optional tall stand for our Plug-N-Fire kiln. 

How to install a Vent Control system on an existing L&L kiln with a vent.

This video shows how to drill your kiln bottom for a Vent-Sure ventilation system in case you are installing on a new kiln or if your holes are not already predrilled. The number and sizes of holes can be determined by looking in the vent instructions.

From Jessica Putnam-Philips:

Yes, you can install a kiln vent. If I can do it you can do it! In this video, I walk you through all the steps to safely install the kiln vent.

The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis).

Also see this link.

Installation instructions for L&L's Vent-Sure Downdraft Kiln Vent.

See this page.

See this page.

How to retrofit your kiln with L&L's new hinge technology.

This video shows you how to adjust the spring tension on your spring hinge in case the lid is too heavy or too light.

This video shows you how to properly adjust your spring hinge. Proper adjustment can prevent damage to your kiln and ensure that the lid closes properly.

Installation instructions for L&L's new reengineered spring hinge system.