Video Support

 This video shows you the basics of how to do routine maintainence on your L&L kiln.

From Jessica Putnam-Philips from Clayshare:

Learn how and why it is so important to set the bottom kiln shelf correctly. With this simple tip you will prolong the life of your kiln, get better more even firings and better glaze results no matter what size your kiln is.

How to change a DynaTrol from a three or two-zone control to a single zone or to change to two-zones from three-zones.

See this link on how to change the number of sections on a Jupiter kiln. When you do this you have to change the number of thermocouples on the control.

How to change the thermocouple offset on a DynaTrol. This helps you calibrate the control to match your kiln.

How to change from Degrees F to C on a DynaTrol control.

How to adjust the amount of power going to a powered bottom using the settings in the DynaTrol.

How to turn off the error codes on a DynaTrol.

For more detail see this.

This shows you how to create a really long program with up to 16 segment of control on your DynaTrol program control.

How to enter a cone offset into a DynaTrol.

How to troubleshoot a DynaTrol (or Genesis or On-touch control) that has no display. 

How to change cycle time for the contactors/relays on a DynaTrol. We typically recommend 25 second cycle time for most kilns firing ceramics that have mechanical relays or contactors.

How to review the program you are firing or are about to fire.