Video Support

This video shows how to check a control fuse on an L&L automatic kiln.

See this for more information.

How to check the operation of a control transformer on an L&L automatic kiln. Applies to all automatic kilns that are not 480 volts. The control transformer reduces the incoming line voltage from 240, 208 or 220 volts to 24 volts for the control and 12 volts for the relays. See this page for more detail.

The most important debugging tool in any toolbox is a trusty multimeter. A multimeter can measure continuity, resistance, voltage and sometimes even current, capacitance, temperature, etc.

This video shows how to check voltage on an L&L automatic kiln.

This shows some interesting techniques for repairing firebrick in front-loading kilns where it is difficult to replace an entire firebrick section.

This video shows you how to repair bottom brick in a front-loading kiln. This is an L&L Easy-Load kiln. Cement available from L&L.

This is an overview of L&L's brick repair kits which can be used to repair damaged kiln brick.

The PDF instructions can be found here.

This is an overview of L&L's brick patch and how it can be used to repair a variety of holes, chips, and gouges in firebrick.

This is an overview of how you can use L&L's brick cement to repair damaged kiln brick.