Video Support

This is a photo montage made by Anna Sea of her installing an e23M-3 kiln. It gives you a good visual idea of the steps involved.

Follow Anna Sea on Instagram!

Quick tip for replacing the hinge on an L&L e18 kiln.

In this video we will walk you through the unpacking and assembly process for an L&L Easy-Fire Kiln!

The assembly process will be similar for most of our polygonal kilns, such as our school master and equad-pro kilns, but if you have any questions about your specific model you can reach out to service@hotkilns.com

PDF Assembly Instructions

Shipping, receiving, and inspecting kilns page

Assembling a Vent-Sure Downdraft Vent

First Firing on an L&L Kiln Genesis Control

From Jessica Putnam-Philips:

Yes, you can install a kiln vent. If I can do it you can do it! In this video, I walk you through all the steps to safely install the kiln vent.

This video shows how to drill your kiln bottom for a Vent-Sure ventilation system in case you are installing on a new kiln or if your holes are not already predrilled. The number and sizes of holes can be determined by looking in the vent instructions.

The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis).

Also see this link.

Installation instructions for L&L's Vent-Sure Downdraft Kiln Vent.

See this page.

See this page.

This video shows you how to properly adjust your spring hinge. Proper adjustment can prevent damage to your kiln and ensure that the lid closes properly.

Installation instructions for L&L's new reengineered spring hinge system.

How to retrofit your kiln with L&L's new hinge technology.

This video shows you how to adjust the spring tension on your spring hinge in case the lid is too heavy or too light.