KNOWLEDGEBASE

The DynaTrol shows cone 05 after I program it for 5 or 06 after I program it for 6

You may have been programming the cone number by pressing 000 first, then the 5 (or 1, 2, 3, 4, 6, 7, 8 or 10) for the cone number.

This results in entering a cone number of 005 (or 001, 002, 003, 004, 006, 007, 008, or 010) which the control will not accept.

No need to zero out the cone # first, by pressing just the number 5 (or 1, 2, 3, 4, 6, 7, 8 or 10) the DynaTrol automatically erases the old cone number and replaces it with cone 6.