Video Support

How to change cycle time for the contactors/relays on a DynaTrol. We typically recommend 25 second cycle time for most kilns firing ceramics that have mechanical relays or contactors.

How to review the program you are firing or are about to fire.

How to change options on the L&L DynaTrol program control.

The first step in firing the kiln is learning the basics of turning on the control and starting to use it.

How to set specialized OTHER options on an L&L DynaTrol program control on L&L kilns.

In this video, we will explain our recommended program for your kiln's first firing using an L&L kiln Dynatrol.

This is our new recommended program and supersedes our old program, which may still be present in your manual.

This video shows you how to recall and use a Vary-fire custom program you have created on the DynaTrol program control on an L&L automatic kiln.

• How to Recall a Vary-Fire Program
• How to Manually Control When Your Vary Fire Program Stops Firing but Still Maintains a Controlled Cooldown
• Standard Easy-Fire Program Profiles in the DynaTrol
• How do I enter a really slow program?
• How do I

How do I control the cooling with the DynaTrol?

This video shows how to replace a DynaTrol on an Easy-Fire kiln. The same principles apply to any kiln with a DynaTrol or Genesis control.

WARNING IF YOU HAVE A TYPE S THERMOCOUPLE: WHEN REPLACING A DYNATROL: CHECK THE CONFIGURATION OF THIS REPLACEMENT CONTROL TO MAKE SURE YOU DON’T MELT YOUR KILN! See this for more information.