KNOWLEDGEBASE

KNOWLEDGEBASE

What can I do to promote even kiln firings?

Control

  1. Our DynaTrol or Genesis control with Dynamic Zone Control is the state-of-the-art way to do this.

Loading

  1. In addition, the way you load the kiln will help promote good uniform firings.
  2. You must keep enough space in the kiln to allow air to circulate.
  3. Make sure your shelves do not block elements.

Kiln Configuration

  1. If you are firing dense loads (such as tiles) you may want to consider one of our powered bottoms.

Venting

  1. A powered downdraft vent such as our Vent-Sure system will also help.

Maintenance

  1. Make sure all of your elements are working and are radiating heat evenly.