REV: 2/15/2025

THREE YEAR LIMITED KILN WARRANTY

L&L Kilns are warranted to be free of defects in workmanship for a period of three (3) years, starting on the date of original purchase from L&L Kiln Mfg., Inc. (L&L) or from an authorized L&L reseller, subject to the following terms and conditions, including but not limited to, the exclusions and limitations set forth herein.  

1) A sales receipt is required for proof of purchase.  

2) In addition, L&L may require you to deliver defective parts to L&L for examination to determine the applicability of these warranty provisions. Do not discard parts before contacting L&L for instructions.  Failure to adhere to L&L's instructions, including those contained in the instruction manual and as stated herein, will void this warranty.  

3) L&L will replace or repair any defective part covered by this warranty and send freight prepaid to L&L. L&L will prepay return shipping costs without charge in the Continental United States.  Shipping outside the Continental United States is at cost.

4) This warranty does not cover on-site labor by L&L. Resellers provide warranty labor at their discretion and expense.

5) Warranty is not valid for second-hand or damaged kilns sold by unauthorized sellers.

6) Any modifications to the original kiln by anyone other than the factory or someone specifically authorized in writing by the factory will void the warranty. Any modification is made solely at the customer's risk. L&L takes no responsibility for hazardous conditions created by unauthorized modifications. 

APPLICATION

This applies to Easy-Fire, Jupiter, Davinci, Doll/Test, JH Series, Quad-Pro, eFL Series, and Fuego kilns when used for ceramics and glass.

EXCLUSIONS AND LIMITATIONS

The following are examples of items that are not covered by and/or circumstances that will void L&L's warranties:

1) Use elements and/or parts other than genuine L&L Kiln parts.

2) Kiln warranty may be voided by firing materials that introduce harmful atmospheres into the kiln. Atmospheres containing carbon, reducing atmospheres (caused, for example, by introducing carbonaceous gasses or solids like graphite or paper into the kiln), binders from lusters and decals, wax burn-out effluents, fluorenes, halogens, acids, metal oxides, and salts are some of the corrosive and harmful atmospheres that will damage a kiln.  Most ceramic processes will release some of these harmful constituents into the kiln and venting will prevent most of the problems that those processes would cause. Also, depending on the concentration of the toxic gases, kiln source ventilation (such as our Vent-Sure) may limit the damage to the kiln. The customer is responsible for ensuring the materials and processes are not harmful. This is of particular importance for industrial uses where processes may be unusual.

3) Over-firing damage for any reason and regardless of cause. IMPORTANT: We specifically warn you not to fire the kiln unattended. Neither the DynaTrol, Genesis, One-Touch control nor any other electronic control used by L&L is designed to be a failproof shut-off device.  L&L is not responsible for damage caused by the failure of any of these controls.

4) Controls made by Orton, Future Controls, Eurotherm, Honeywell, or other manufacturers are warranted by their manufacturers. L&L is not responsible for damage caused by the failure of one of these controls.

5) Also note that it is easy to melt clay if you inadvertently fire it hotter than its rating. Some controls allow you to limit the kiln's upper firing limit to avoid accidental overfiring of this type. Contact the factory or read your control instruction manual if you want further information.

6) Firebrick is fragile by nature and will chip, crack, and create dust. L&L designs kilns to minimize these effects but cannot warrant cracking, breakage, spalling, or dusting. There is specifically no warranty for cracked arches, tops, lids, or bottoms.  

7) Corrosion of the case is expressly not warranted.  Corrosion is typically due to the use of a kiln in an unheated outside shed (where morning dew condenses on the kiln and humidity attacks the kiln) or from an unvented kiln (where the water vapor and fumes generated by firing ceramic materials attack the kiln case). However, even a vented kiln can corrode due to all the environmental and process conditions to which a kiln can be exposed. Exposure to other ambient conditions, including but not limited to humidity, rain, snow, dust, and salt air will also cause corrosion.

8) Damage due to neglect, inadequate room or kiln ventilation, mechanical abuse, improper storage, insufficient maintenance, improper use, or freight damage.

9) Damage to the elements or element holders due to failure to properly keep the kiln clean (i.e. allowing glaze or ceramic chards from exploding pots) to make contact with the element holders.

10) Damage to the kiln caused by firing in ambient conditions that are too hot for the control or other components in the kiln. The DynaTrol (or Genesis) is rated up to 125°F (52°C). That means the room temperature should be less than 100°F (38°C) (because the control will be slightly hotter than room air due to heat transfer from the kiln). Note that direct sunlight on the control face may raise the board's temperature beyond what you would expect from the ambient temperature or the kiln heat.

11) Failure to report the defect within fifteen (15) days after it becomes manifest or known.

12) Any alteration of parts or design that varies from factory designs.

13) Thermocouple Protection Tubes are not warranted against breakage.

14) L&L's warranty is strictly limited to repairing or replacing defective items. Kilns may not be returned.

15) L&L does not authorize resellers to modify and/or assume any obligations or liabilities other than those expressed in this limited warranty, and any such additional commitments are null and void.

16) EXCEPT AS SPECIFICALLY WARRANTED HEREIN, KILNS ARE SOLD AS IS.  L&L MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, COVERING THE GOODS AND SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Purchaser acknowledges that certain conditions or circumstances may be created or incurred by Purchaser or user or over which L&L has no control, including, but not limited to, climactic conditions, improper use, inadequate maintenance, and  Purchaser, as a condition of purchase or use, assumes responsibility for and releases L&L from liability arising out of the use of the kilns attributable to such causes.  

17) L&L SHALL NOT BE LIABLE FOR ANY INCIDENTAL, SECONDARY, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO BODILY INJURY OR DEATH, LOST PROFITS, LOSS OF USE, OR OTHER ECONOMIC LOSSES. Purchaser agrees that L&L's total liability for any damages or remedies arising hereunder shall be limited to direct damages, in an amount not exceeding the purchase price paid. Replacement, repair, or refund, at L&L's sole discretion, of the purchase price of the equipment purchased shall constitute the exclusive and sole remedy available to Purchaser. Purchaser must commence any action for breach of contract or negligence within 6 months after delivery of the equipment to Purchaser. 

18) L&L's full Terms and Conditions of Sale are available at hotkilns.com/terms.

3 YEAR PRO-RATED ELEMENT & THERMOCOUPLE LIMITED WARRANTY

Elements and thermocouples are warranted for three (3) years on a pro-rated basis with the following exceptions:

1) Glaze damage to the elements caused by accidentally scraping edges of unfired glazed ware against the element groove. WARNING: causing the unfired glaze to contaminate elements will damage elements, lead to element failure, and create a fire hazard.

2) Firing of the kiln to a temperature that exceeds the lower of either the maximum rating of the kiln or 2350°F (1290°C).

3) Damage to elements caused by the explosion of ceramic objects. WARNING: This may damage the elements, lead to element failure, and create a fire hazard.

4) Elements are warranted on a prorated schedule based on the kiln's ship date. All dates are based on the factory's ship date if sold directly or drop-shipped to the customer. If sold from a reseller's warehouse, the date would be based on when it was shipped and/or sold from the reseller. The warranty is not extended when the kiln's operation is delayed for shipping, warehousing, or other reasons.

5) Labor to replace elements is not covered.

6) The pro-rated discount schedule is only valid for elements you are replacing. In other words, you can't buy a whole set of elements at these prices for anticipated future replacement. We reserve the right to ask for replaced elements in return.

7) This replacement schedule is limited to new kilns.

PRO-RATED SCHEDULE FOR KILNS THAT HAVE A VENT-SURE INSTALLED

Date of time of shipment from the factory	Price of thermocouples and elements
0-12 Months	No Charge
12-24 Months	25% of the full list price
24-36 Months	50% of the full list price

 

PRO-RATED SCHEDULE FOR ALL KILNS THAT DO NOT HAVE A VENT-SURE INSTALLED (AS WELL AS ALL JH SERIES KILNS)

JH KILNS

The pro-rated schedule for elements for the JH series kilns varies because of the hard use these kilns get during the crystalline glaze firing process. 

KILNS WITHOUT VENTS

In kilns used without an automatic Vent-Sure, the elements will corrode much quicker than normal and fail more quickly, and this pro-rated schedule takes this into account. NOTE: The vent on the kiln must be an L&L Vent-Sure downdraft vent, or this exclusion will apply even with a vent made by other companies. 

Date of time of shipment from the factory	Price of thermocouples and elements
0-6 Months	No Charge
6-12 Months	25% of the full list price
12-24 Months	50% of the full list price

3-YEAR LIMITED VENT WARRANTY

L&L VS-1 Vent-Sure is warranted to be free of defects in workmanship for (3) years, starting from the date of original purchase from L&L Kiln Mfg., Inc. or from an authorized L&L distributor or dealer. Corrosion of motor and parts is not covered. A sales receipt is required for proof of purchase. In addition, L&L may require you to send in defective parts for examination to determine the applicability of these warranty provisions. DO NOT DISCARD PARTS BEFORE CONTACTING L&L. L&L Kiln Mfg., Inc. will replace or repair any defective part sent freight-prepaid to L&L Kiln Mfg., Inc. following L&L's written acknowledgment and authorization regarding the specific issue. L&L Kiln Mfg., Inc. will prepay return shipping costs without charge in the Continental United States. The factory does not cover on-site labor; however, local distributors or dealers may offer this service.

EXCLUSIONS & LIMITATIONS

1) The Vent-Sure must be used as instructed in our vent instructions. 

2) Using any wax process that might cause condensation of wax or other similar substance in the vent system will void the warranty.

3) The Vent-Sure is not warranted to vent highly corrosive fumes, and any such use will void any warranties otherwise provided.

PARTS WARRANTY

1) L&L does not warrant replacement elements and thermocouples except for catastrophic failure (for instance, a situation where the element end broke off without the operator's fault). 

2) Parts (aside from elements and thermocouples) are warranted for ninety (90) days from the time of shipment. Complete control panels are warranted for one (1) year from shipment. The warranty is for replacement or repair only and does not include labor.