Industrial Polygonal Kilns

Industrial Polygonal Kilns

Specially Designed Large Polygonal Kilns for Industry

L&L designs and builds custom polygonal kilns with 4-1/2" of firebrick. We can make almost any diameter and any height in multiples of 9" high sections. There are three elements per 9" high section. The base is made of welded angle-iron with leveling bolts. On top of this typically we put 4-1/2" of K23 brick. These are typically cemented in sections and then held together with a stainless steel band. The top is typically made of 4" thick folded and formed ceramic fiber modules.

  •     The top is typically lifted off with an overhead crane or forklift but we have designs for pneumatically assisted lift-off and swing-away lids.
  •     Temperatures are limited to 2350°F.
  •     Below are photographs of some of the kilns we have built for our customers. Please contact sales@hotkilns.com or call for a custom quote.

Model SP3845 and SP4854 at Superconducting Systems

Model SP3845 and SP4854 at Superconducting Systems.

Model SP4354 which is 43 inches in diameter by 54 inches high

Model SP4354 which is 43" in diameter by 54" high. These kiln sections were made for an OEM and did not include a top or bottom.

Model SP3845 at Superconducting Systems

Model SP3845 is 38" in diameter by 45" high. This photo shows the top and base.

Model SP3845 at Superconducting Systems

Model SP3845 is 38" in diameter by 45" high. This photo shows the top open so you can see inside.

Model SP4854 top-loading large polygonal kiln

Model SP4854 48" diameter by 54" high Large Polygonal Kiln from above.

Model SP4854 crated and ready for shipment

Model SP4854 is crated and ready for shipment.

Please contact sales@hotkilns.com or call for a custom quote.