KILN:
X3245-D Electric Kiln

Large Rectangular Sectional Kiln

KILN:
X3245-D Electric Kiln

Large Rectangular Sectional Kiln

$10,600
LEAD TIME: 6 to 8 Weeks

Model X3245-D Square Automatic DaVinci Kiln with a Multi-Program Three-Zoned DynaTrol control. Floor-standing control panel. Sectional and modular construction allows future expansion aided by the unique adjustable spring-loaded counterbalanced welded and powder-coated hinge system. Stand is a welded steel frame with a sheet of aluminized steel between the bottom brick and the stand. Sides are made of specially machined arched bricks for strength. Kiln comes with hard ceramic element holders, protected thermocouples, and solid peephole plugs. 30-1/2" Wide x 30-1/2" Deep x 45" High (25 cubic feet). 3" K23 brick. Direct power connection. C-MET-us listed in the USA & Canada. Cone 10 all voltages.

  • Part Number:
    H-X-K245/00
  • Includes: Ten 28" X 14" Rectangular Shelves (3/4" thick), Twelve Each 1/2", 1", 2", 4", 6", and 8" Square Posts, and One Pair Heat Resistant Gloves
  • Price:
    $1,250.00
  • Insulation:
    3" K23 Firebrick
  • Sections:
    Five 9" high sections
  • Inside Dimensions:
    30.50"
    Wide x
    30.50"
    Deep x
    45.00"
    High (77.47 cm Wide x 77.47 cm Deep x 114.3 cm High)
  • Outside Dimensions:
    63.00"
    Wide x
    51.00"
    Deep x
    102.00"
    High (160.02 cm Wide x 129.54 cm Deep x 259.08 cm High)
  • Weight:
    Kiln Weight (lbs)
    1065
    lbs (483 kg)
SKU Model Number Watts Volts Phase Fuse Size
K-X-3245/21 X3245-D-208-1Ph 30,065 208 Single Phase 200 Amp
  • Additional Information
  • Amps: 144.5
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 250 mcm
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-3245/22 X3245-D-208-3Ph 30,065 208 Three Phase (Delta) 150 Amp
  • Additional Information
  • Amps: 100.1
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 3/0 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-3245/31 X3245-D-240-1Ph 30,065 240 Single Phase 175 Amp
  • Additional Information
  • Amps: 125.3
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 4/0 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-3245/32 X3245-D-240-3Ph 30,065 240 Three Phase (Delta) 100 Amp
  • Additional Information
  • Amps: 86.8
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 1 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-3245/62 X3245-D-480-3Ph 30,065 460-480 Three Phase (Delta) 50 Amp
  • Additional Information
  • Amps: 36.2
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Three Elements in Wye with 277 Volts per element
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-324Q/62 X3245-D-480-3Ph-QD 30,065 460-480 Three Phase (Delta) 60 Amp
  • Additional Information
  • Amps: 43.4
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 6 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Two 240V Quad Elements in Series
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-3245/41 X3245-D-220-1Ph 30,065 220-230 Single Phase 175 Amp
  • Additional Information
  • Amps: 136.7
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 4/0 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-3245/52 X3245-D-380-3PY 30,065 380 Three Phase (Wye) 70 Amp
  • Additional Information
  • Amps: 54.7
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 4 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-3245/82 X3245-D-400-3PY 30,065 400 Three Phase (Wye) 70 Amp
  • Additional Information
  • Amps: 52.3
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 4 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):
K-X-3245/72 X3245-D-415-3PY 30,065 415 Three Phase (Wye) 70 Amp
  • Additional Information
  • Amps: 50.1
  • Wire Connection: Direct Wire Connection (no cord)
  • Wire Gauge for Connection: 4 Ga
  • Branch Fusing: Branch Fused
  • Element Wiring: Parallel
  • Max Temperature: Cone 10, 2350F, 1290C
  • Certifications
  • International: Made for all markets except EU
  • CE: Not CE certified
  • UL499: c-MET-us listed to UL499 Standards in the US and Canada
  • Wiring Diagram(s):

Control

DynaTrol with 4 Easy-Fire programs (Slow Bisque, Fast Bisque, Slow Glaze, Fast Glaze), 6 custom programs, PreHeat, Delay, Program, Segment Review, and Diagnostics. Zone control included on most kilns. Also see Genesis Touch Screen Option with Phone App for Remote Monitoring
Zone control gives you the utmost in controllable temperature uniformity. The DynaTrol separately measures temperatures in the bottom, middle and top of the kiln and automatically adjusts the heat output of three zones during the entire firing.
DaVinci Panels are wired to industrial standards with good clean wire layout.
The control panel is mounted on a stand away form the kiln.
Ceramic protection tubes protect the end of the thermocouple.
Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
Power Relays are mercury-free to comply with increasing regulation and concern about mercury in schools. Solid State Contactors are available as an option on most L&L Kilns.
All L&L Kilns come with an on-off switch

Durability

Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. No pins! The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
Arched sides on DaVinci kilns are very strong and promote good air circulation
A unique welded rigid frame supports the entire lid on a DaVinci kiln.
Welded heavy-duty stand supports heavy loads. Alumized top sheet reflects heat.
Industrial grade ceramic terminal blocks make changing elements easy.
Solid large non-tapered peepholes allow a wider view into the kiln.
Special brick coating hardens and seals brick for durability and cleaner operation.
Corrosion resistant materials and methods result in a long-lasting kiln.
Three case clamps per 9" high kiln section are redundant safety for your L&L kiln.

Performance

K23 firebrick combines good insulation with strength

Ease of Use

Even the largest DaVinci lids can easily be lifted by one person.

Serviceability

Sectional kiln construction make DaVinci kilns easy to move, set up and disassemble for maintenance. Kiln Sections all plug into a separate control panel making the kiln easy to take apart and reconfigure.
The bottom can be easily reversed in case of a firing mishap.

Support

Most L&L Kilns have a three-year limited warranty.
The combined experience at L&L Kilns in kilns, ceramics, electrical engineering and process engineering is unsurpassed. We work as a team to help you get you answers and help.
The combined experience at L&L Kilns in kilns, ceramics, electrical engineering and process engineering is unsurpassed. We work as a team to help you get you answers and help.

Safety

Most L&L kilns are MET listed to UL499 standards. Listed kilns include Easy-Fire. Jupiter. DaVinci, School-Master, Liberty-Belle. Hercules & Easy-Load kilns areMET-Us Listed for US only.

Elements

The combination of 1/2" diameter element coils, the doubled surface area of the Quad element design, and superior heat transfer of L&L's patented ceramic element holders, make this the best element system in the world today.
APM elements increase element life in difficult applications

Thermocouples

Type S Platinum Thermocouples are recommended for high fire applications. NOTE: Price of upgrade is per each thermocouple.
Pyrocil thermocouples are sensitive but limited to about 2200°F but offer greater sensitivity to temperature change and so may be appropriate in applications below 2200°F that require sensitivity. NOTE: Price of upgrade is per each thermocouple.

Vents

A Critical component in the longevity of your kiln!The Vent-Sure automatic kiln vent helps prevent corrosion on the inside and outside of your kiln.
The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis).

Kiln Furniture

Kiln furniture kits are the recommended set of ceramic shelves, posts and kiln wash that go with each kiln model. These are for loading the work in the kiln.
These safety gloves are perfect for handling hot work when unloading a kiln.

Controls

The new Genesis control from Bartlett includes a touch screen interface and WIFI connectivity added to the proven software of the DynaTrol. A phone app allows you to monitor your kiln remotely.
Solid State Relays are quiet and result in longer element life because the switching time is so fast the elements don’t heat and cool as much the way the will with regular mechanical contactors. The whole system includes heat sinks, special fast acting fuses, cooling fan and extra safety relays.
Electronic High Limit Back Up Control acts as an upper limit back up to the main control. Back up contactors are also available.
Control, monitor and record data for up to 10 kilns from your computer for a one-time price.
The Eurotherm 2604 is an industrial-grade PID control with two or three zone capability built in.

Power

L&L's 480 volt option can include a NEMA 1 control panel
This option helps protect your control from electrical noise

Miscellaneous

Unpowered rings can extend the height of our DaVinci kilns.
This special Seismic Kiln Rack and Brace is designed to prevent a kiln from falling over during an earthquake.
X3200, T2300 and T3400 DaVinci kilns can be ordered with a 4" thick ceramic fiber folded/formed module lid.
  • Kiln:
    Skid #1: 48 IN Wide X 50 IN Deep X 42 IN High | Skid #2: 45 IN Wide X 48 IN Deep X 93 IN High | Skid #3: 48 IN Wide X 50 IN Deep X 42 IN High
    (
    Skid #1: 122 CM Wide X 127 CM Deep X 107 CM High | Skid #2: 115 CM Wide X 122 CM Deep X 237 CM High | Skid #3: 122 CM Wide X 127 CM Deep X 107 CM High
    )
  • Ship Weight:
    1265
    lbs (574 kg)
  • Kiln with Furniture Kit:
    Skid #1: 48 IN Wide X 50 IN Deep X 54 IN High | Skid #2: 45 IN Wide X 48 IN Deep X 93 IN High | Skid #3: 48 IN Wide X 50 IN Deep X 42 IN High
    (
    Skid #1: 122 CM Wide X 127 CM Deep X 138 CM High | Skid #2: 115 CM Wide X 122 CM Deep X 237 CM High | Skid #3: 122 CM Wide X 127 CM Deep X 107 CM High
    )
  • Ship Weight:
    1480
    lbs (671 kg)
  • Kiln with Vent:
    Skid #1: 48 IN Wide X 50 IN Deep X 54 IN High | Skid #2: 45 IN Wide X 48 IN Deep X 93 IN High | Skid #3: 48 IN Wide X 50 IN Deep X 42 IN High
    (
    Skid #1: 122 CM Wide X 127 CM Deep X 138 CM High | Skid #2: 115 CM Wide X 122 CM Deep X 237 CM High | Skid #3: 122 CM Wide X 127 CM Deep X 107 CM High
    )
  • Ship Weight:
    1280
    lbs (581 kg)
  • Kiln with Vent and Furniture Kit:
    Skid #1: 48 IN Wide X 50 IN Deep X 54 IN High | Skid #2: 115 CM Wide X 122 CM Deep X 237 CM High | Skid #3: 48 IN Wide X 50 IN Deep X 42 IN High
    (
    Skid #1: 122 CM Wide X 127 CM Deep X 138 CM High | Skid #2: 115 CM Wide X 122 CM Deep X 237 CM High | Skid #3: 122 CM Wide X 127 CM Deep X 107 CM High
    )
  • Ship Weight:
    1495
    lbs (678 kg)
  • Packaging:
    Three Wooden Crates

Turntable View

X3245-D Electric Kiln