Home >
strict warning: Only variables should be passed by reference in /home/hotkilns/public_html/sites/all/modules/captcha/captcha.inc on line 61.
Hercules Front-Loading Kilns
EL2424-H (8 Cubic Feet)

Click on image to enlarge

EL2424-H (8 Cubic Feet)

More images

4-1/2" thick arched roof is made from K25 brick for durability
Elements in door maintain proper uniformity in the kiln.
Thick welded case features powdering coating for maximum durability
Door seal features a woven high temperature tadpole gasket
Positive door clamps lock door tight
This shows how the firebrick and backup insulation is constructed with heat-locks, skew bricks and K25 4-1/2" arch
The cooling vent outlet is a 3" by 1.5" plug in the center of the roof that can be removed by hand.
Shows the vent holes in the bottom controlled by a sliding damper
The control panel is hinged for easy access
Shows air space between control panel and kiln. This results in cooler long-lasting electronics.
Inside the control panel. All wiring is neatly laid out.
DynaTrol features four Easy-Fire programs and six Vary-Fire user-defined programs plus zone control
The benefits of zone control
8 Gauge Type K Thermocouple shown with protection tube
Door Switch turns off power when door opens
Power wiring on Hercules
Molded Ceramic Element terminal used on Hercules and Easy-Load kilns- easy to disconnect elements and power wiring.
An EL2436 loaded with pottery
Adjustable foot pad for leveling kiln
Adjustable very strong fabricated door hinge

Furniture Kit

 H-B-2424/00 ($390.00)
Furniture Kit for EL2424-H Hercules

Four 11" x 22" Rectangular Shelves (3/4" thick), Six Each 1/2", 1", 2", 4", 6", and 8" Square Posts, Heat Resistant Gloves and 1 pound of Cone 10 Kiln Wash

Questions? Quote?

Send an email to sales@hotkilns.com or
call 800-750-8350.

EL2424-H Front-Loading Kiln

Model EL2424-H Hercules Front-Loading kiln with Multi-Program Two-Zoned DynaTrol, hard ceramic element holders, separate attached stand, cool-firing separate side-mounted panel, multi-layered insulation (3" K23 firebrick with 2" back up mineral wool), full arch 4-1/2" thick firebrick roof made of harder K25 firebrick, side, back and door elements, door gasket, heavy gauge welded case that is powder-coated hammertone blue for corrosion resistance, manual vent system with roof plug and bottom inlet holes with sliding damper. 25" Wide x 26" Deep x 24" High (8 cubic feet). Direct power connection. MET-us listed in the USA. Cone 10 for all voltages.

See this page for Front-Loader Shipping Quote Form and Front-Loader Installation Checklist

Buy Now

$9025
3" (76 mm) K23 Premium Firebrick with 2" (50mm) Mineral Wool Back-Up Insulation
Front-Loading
One section
4 sides
8 cubic ft (227 Liters)
800 pounds ( Kg)
25" Wide x 25" Deep x 24" High
63.5 cm Wide x 63.5 cm Deep x 61 cm High
47" Wide x 43" Deep x 63" High
119.4 cm Wide x 109.2 cm Deep x 160 cm High
Part Number
Watts
Volts
Phase
Fuse Size
K-B-2424/31
15000 W
240 V
Single Phase
80 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for USA market only
  • CENot CE certified
  • UL499MET-us listed to UL499 Standards in the US only
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-B-2424/32
15000 W
240 V
Three Phase (Delta)
70 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for USA market only
  • CENot CE certified
  • UL499MET-us listed to UL499 Standards in the US only
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-B-2424/21
15000 W
208 V
Single Phase
100 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for USA market only
  • CENot CE certified
  • UL499MET-us listed to UL499 Standards in the US only
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-B-2424/22
15000 W
208 V
Three Phase (Delta)
80 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for USA market only
  • CENot CE certified
  • UL499MET-us listed to UL499 Standards in the US only
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-B-2424/62
15000 W
460-480 V
Three Phase (Delta)
40 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for USA market only
  • CENot CE certified
  • UL499MET-us listed to UL499 Standards in the US only
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-B-2424/41
15000 W
220-230 V
Single Phase
90 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for all markets except USA and EU
  • CENot CE certified
  • UL499MET-us listed to UL499 Standards in the US only
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-B-2424/52
15000 W
380-415 V
Three Phase (Wye)
50 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for non-USA markets only
  • CENot CE certified
  • UL499MET-us listed to UL499 Standards in the US only
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

No assembly required
Solid steel case (11 gauge) with separate but attached welded square tubing stand. Feet include anchor pads with anchor points.
Heavy-duty door hinges to the left (special option allows it to be hinged on the right). Door opens all the way so that the door opening is completely unobstructed.
The welded angle-iron stand is separate but attached to the case. It includes leveling bolts and holes for anchoring the kiln to the floor.
A proprietary brick coating is applied to all interior surfaces of the kiln. This is put on before the element holders are inserted. This coating penetrates the firebrick and fuses the surface on a microscopic level which helps prevent dusting and crumbling of the fragile firebrick.
Solid ceramic peephole plugs with full 1” diameter. Two total: one per section.
Limited Three Year Warranty
DynaTrol Multi-Program Zone Control
Two control zones with two separate thermocouples. More about zone control.
8 Ga Type K Exposed Thermocouple in Mullite Protection Tube (6.5" long /165mm)
Mounted on control panel
Separate attached to right side.
Control box cover is hinged for easy access to inside of control box.

Durability

Hard Ceramic Element Holders Make L&L Kilns More Durable
Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. No pins! The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
Thermocouple Protection Tubes
Mullite protection tubes extend thermocouple life and keep kiln clean. The mullite protection tube keeps the metal oxides of the thermocouple tip from dropping off and contaminating your work.
Thick 8 Gauge Thermocouples
Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
Molded Ceramic Industrial-Grade Element Connection Blocks
Industrial grade ceramic terminal blocks make changing elements easy.
Proprietary Reflective Coating Hardens & Seals Brick
Special brick coating hardens and seals brick for durability and cleaner operation.
Arched Roof (Hercules & Easy-Load)
Arched roofs are the time-proven way to build a long-lasting front-loading kiln
Powder-Coated Thick Welded Case (Hercules & Easy-Load)
A thick welded steel case holds up better to corrosion over time.

Performance

DynaTrol Multi-Program Zone Control
DynaTrol with 4 Easy-Fire programs (Slow Bisque, Fast Bisque, Slow Glaze, Fast Glaze), 6 custom programs, PreHeat, Delay, Program, Segment Review, and Diagnostics. Zone control included on most kilns.
Automatic Zone Control
Zone control gives you the utmost in controllable temperature uniformity. The DynaTrol separately measures temperatures in the bottom, middle and top of the kiln and automatically adjusts the heat output of three zones during the entire firing.
Thermal Ceramics Firebrick
K23 firebrick combines good insulation with strength
Manual Venting System for Cooling Front-Loading Kilns
This is for cooling purposes and does not replace the Vent-Sure automatic kiln vent.

Ease of Use

Solid Wide-View Peephole Plugs
Solid large non-tapered peepholes allow a wider view into the kiln.
Strong Door Latches (Hercules & Easy-Load)
Two strong door latches secure the door. They are adjustable.

Support

Standard Three-Year Limited Warranty
Most L&L Kilns have a three-year limited warranty.
Superior Technical Support
The combined experience at L&L Kilns in kilns, ceramics, electrical engineering and process engineering is unsurpassed. We work as a team to help you get you answers and help.

Safety

Listed to UL499 Standard by MET
Most L&L kilns are MET listed to UL499 standards. Listed kilns include Easy-Fire. Jupiter. DaVinci, School-Master, Liberty-Belle. Hercules & Easy-Load kilns areMET-Us Listed for US only.
On-Off Switch and Panel Fuse
All L&L Kilns come with an on-off switch
Door Shut-Off Switch (Hercules & Easy-Load)
Shuts off power to kiln when door is open
Mercury Free Power Contactors
Power Relays are mercury-free to comply with increasing regulation and concern about mercury in schools

Elements

APM Sintered Powder Metal Elements

APM elements increase element life in difficult applications

Thermocouples

Type S Platinum Thermocouples

Type S Platinum Thermocouples are recommended for high fire applications. NOTE: Price of upgrade is per each thermocouple. 

Pyrocil Metal Sheathed Industrial Thermocouples

Pyrocil thermocouples are sensitive but limited to about 2200°F but offer greater sensitivity to temperature change and so may be appropriate in applications below 2200°F that require sensitivity. NOTE: Price of upgrade is per each thermocouple. 

Vents

Vent-Sure Downdraft Kiln Vent System

The L&L Vent-Sure Kiln Vent is the most powerful downdraft kiln vent on the market today. That means you have more flexibility in the installation.

Vent Control

The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis). 

Kiln Furniture

Furniture Kits

Kiln furniture kits are the recommended set of ceramic shelves, posts and kiln wash that go with each kiln model. These are for loading the work in the kiln.

Kiln Wash for Kiln Furniture

Cone 10 Kiln wash is used to coat shelves to prevent sticking of glaze.

Safety Gloves

These safety gloves are perfect for handling hot work when unloading a kiln.

Controls

Genesis Touch Screen Control

The new Genesis control from Bartlett includes a touch screen interface and WIFI connectivity added to the proven software of the DynaTrol. 

KISS Computer Interface & Datalogger for DynaTrol Control

Control, monitor and record data for up to 10 kilns from your computer for a one-time price.

Electronic High Limit Back Up Control

Electronic High Limit Back Up Control acts as an upper limit back up to the main control.

Eurotherm Three Zone Industrial Computer Control

The Eurotherm 2604 is an indutrial-grade PID control with two or three zone cabability built in.

Power

480 Volt Option

L&L's 480 volt option can include a NEMA 1 control panel

120 Volt Power Supply & Electrical Noise Filter For Automatic Kilns

This option helps protect your control from electrical noise

50" Wide x 45" Deep x 69" High
50" Wide x 45" Deep x 69" High and 36" Wide x 36" Deep x 25" High
50" Wide x 45" Deep x 69" High and 36" Wide x 36" Deep x 19" High
50" Wide x 45" Deep x 69" High and 36" Wide x 36" Deep x 25" High
842 lbs ( kg) + Kit 1121 lbs ( kg) + Vent 867 lbs ( kg) + Kit + Vent 1140 lbs ( kg)
Wooden Crate