The DynaTrol shows cone 05 after I program it for 5 or 06 after I program it for 6

strict warning: Only variables should be passed by reference in /home/hotkilns/public_html/sites/all/modules/captcha/captcha.inc on line 61.

Search Knowledgebase

Knowledgebase FAQ

  • See the Sales FAQs for Frequently Asked Sales and Preorder Questions
  • The Knowledgebase is organized into a series of questions and answers having to do mostly with technical troubleshooting and understanding of kilns.
  • Although we write this for our own kilns many of these articles apply to other makes - although L&L takes no responsibility for that.
  • Many Knowledgebase articles have Actions, PDFs and Videos associated with them.
  • Actions are specific actions for you to take during the troubleshooting or repair process.
  • Each Action may also have Videos and PDFs associated with it and, in addition, specific Cautions.
The DynaTrol shows cone 05 after I program it for 5 or 06 after I program it for 6

You may have been programming the cone number by pressing 000 first, then the 5 (or 1, 2, 3, 4, 6, 7, 8 or 10) for the cone number.

This results in entering a cone number of 005 (or 001, 002, 003, 004, 006, 007, 008, or 010) which the control will not accept.

No need to zero out the cone # first, by pressing just the number 5 (or 1, 2, 3, 4, 6, 7, 8 or 10) the DynaTrol automatically erases the old cone number and replaces it with cone 6.