How to add soak or change temperature to a 3-Button Bartlett Control or Custom Programs in the ONe-Touch Control during a firing

strict warning: Only variables should be passed by reference in /home/hotkilns/public_html/sites/all/modules/captcha/captcha.inc on line 61.

Search Knowledgebase

Knowledgebase FAQ

  • See the Sales FAQs for Frequently Asked Sales and Preorder Questions
  • The Knowledgebase is organized into a series of questions and answers having to do mostly with technical troubleshooting and understanding of kilns.
  • Although we write this for our own kilns many of these articles apply to other makes - although L&L takes no responsibility for that.
  • Many Knowledgebase articles have Actions, PDFs and Videos associated with them.
  • Actions are specific actions for you to take during the troubleshooting or repair process.
  • Each Action may also have Videos and PDFs associated with it and, in addition, specific Cautions.
How to add soak or change temperature to a 3-Button Bartlett Control or Custom Programs in the ONe-Touch Control during a firing

Add Time to Hold Period

Available only during a hold period. This option allows you to add time in 5 minute increments to a hold (soak) period. When in a hold period (during a hold or soak, the temperature in the kiln will be alternating in the display with the remaining hold time), press the UP key. When "SStP" is displayed press the UP key again and "tME"  will be displayed. Note that the "M" is displayed as two upside down "U"s. Press ENTER and 5 minutes will be added to the hold time. You may use this procedure as many times as necessary to get the hold time that you want.

Add Temperature to Hold Period

Available only during a hold period.  This option allows you to add temperature in 5 degree increments to a hold (soak) period. When in a hold period (during a hold or soak, the temperature in the kiln will be alternating in the display with the remaining hold time), press the UP key. When "SStP" is displayed press the UP key twice more and "tMP" will be displayed. Note that the "M" is displayed as two upside down "U"s. Press ENTER and 5 degrees will be added to the hold temperature. You may use the add temperature procedure as many times as necessary to get the hold temperature that you want.

One-Touch Control

The process works the same when using a Custom Program in the One-touch Program Control. The UP button is the Arrow pointing up.