Electronic High Limit Back Up Control
High Limit Control
- Bartlett High Limit Control with latching relay acts as a back up to the main DynaTrol control.
- You set a high limit temperature on this control for the kiln.
- If the DynaTrol fails for any reason then this acts as a "back stop" and shuts the kiln down.
- It latches in the closed position until the High Limit control is manually reset by pressing a button on the face of the control.
Back Up Contactor Option
- The normal configuration for the control breaks the power to the negative of the relays.
- However, you can also purchase this with back up contactors which will be completely redundant power contactors so that if one or more contactors fail in a closed position then the kiln still cannot climb above the High Limit set point.
|High Limit Back Up Control||N-G-PKHL/00||$590.00|
|Back Up Contactors for Jupiter Two-Section Kilns||N-G-BCJ2/00||$155.00|
|Back Up Contactors for Jupiter Three-Section Kilns||N-G-BCJ3/00||$205.00|
|Back Up Contactors for Jupiter Four-Section Kilns||N-G-BCJ4/00||$260.00|
|Back Up Contactors for Jupiter Five-Section Kilns||N-G-BCJ5/00||$310.00|
|Back Up Contactors for DaVinci Two-Section Kilns||N-G-BCX2/00||$360.00|
|Back Up Contactors for DaVinci Three-Section Kilns||N-G-BCX3/00||$440.00|
|Back Up Contactors for DaVinci Four-Section Kilns||N-G-BCX4/00||$515.00|
|Back Up Contactors for DaVinci Five-Section Kilns||N-G-BCX5/00||$590.00|
|Back Up Contactors for EL2424||N-G-BCE2/00||$360.00|
|Back Up Contactors for EL2427 & All Easy-Load Kilns||N-G-BCE3/00||$440.00|