Home >
strict warning: Only variables should be passed by reference in /home/hotkilns/public_html/sites/all/modules/captcha/captcha.inc on line 61.
eFL Series Front-Loading Kilns
eFL2026 Front-Loading kiln by L&L

Click on image to enlarge

eFL2026 Front-Loading kiln by L&L

More images

eFL2026 Front-Loading kiln by L&L
eFL2026 Front-Loading kiln by L&L
eFL2026 Front-Loading kiln by L&L
eFL2026 Front-Loading kiln by L&L
eFL2026 Front-Loading kiln by L&L
eFL2026 Front-Loading kiln by L&L
eFL2026 Front-Loading kiln by L&L
eFL2026 Front-Loading kiln by L&L
eFL2026 Front-Loading kiln by L&L
The element connection block and thermocouples
DynaTrol features four Easy-Fire programs and six Vary-Fire user-defined programs plus zone control
Infrared photos show how L&L's panel stays cool
Benefits of Dynamic Zone Control

Furniture Kit

 H-J-2026/KT ($575.00)
Furniture Kit for eLF2026

Six 10" X 24" Rectangular Shelves (3/4" thick), Six Each 1/2", 1", 2", 4", 6", and 8" Square Posts, Heat Resistant Gloves and stainless steel channels that attach to base to support the kiln shelves vertically

Questions? Quote?

Send an email to sales@hotkilns.com or
call 800-750-8350.

eFL2026 Front-Loading Kiln

Model eFL2026 Front-Loading Kiln with with Multi-Program Three-Zoned DynaTrol mounted in an easy-open cool-firing piggy-back control panel that is angled for easy viewing of control. Kiln comes with hard ceramic element holders, thermocouple protection tubes, strong solid-top stand, and solid peephole plug.  The sides and top are arched for super strength. The base, door and door frame are formed from precision sheet metal to be both lightweight and strong. Two shelves provide storage for kiln furniture and structural support. These kilns ship easily by common carrier, are inexpensive to buy, install, and maintain. 22"W by 26"H by 26"D (8.6 cubic feet). 3" K23 brick. Direct wire hookup. Cone 10 for all voltages.  

See the General Dimension Drawing.

See this checklist for shipping.

Buy Now

$5600
3" (76 mm) K23 Premium Firebrick on sides, back, bottom and top. 3" K23 plus 1" microporous insulation in door to compensate for having no elements in door.
Front-Loading
One section
8.6 cubic ft (245 Liters)
500 pounds (226 Kg)
22"W by 26"H by 26"D
56 cm Wide by 66 cm High by 66 cm Deep
38" Wide x 73" High x 33" Deep
97 cm Wide by 186 cm High by 84 cm Deep
Download (PDF)
Part Number
Watts
Volts
Phase
Fuse Size
K-H-2026/31
13300 W
240 V
Single Phase
70 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for USA market only
  • CENot CE certified
  • UL499Not listed to UL499
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-H-2026/32
13300 W
240 V
Three Phase (Delta)
40 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

  • Amps32
  • Max TemperatureCone 10, 2350F, 1290C
  • Wire ConnectionA six foot cord with a 50 amp NEMA 15-50 three phase plug. Neutral is not used.
  • Wire Ga for Connection6 Ga
  • Branch FusingNo

Certifications and Markets

  • InternationalMade for USA market only
  • CENot CE certified
  • UL499Not listed to UL499
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-H-2026/21
13300 W
208 V
Single Phase
80 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for USA market only
  • CENot CE certified
  • UL499Not listed to UL499
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-H-2026/22
13300 W
208 V
Three Phase (Delta)
50 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

  • Amps36.9
  • Max TemperatureCone 10, 2350F, 1290C
  • Wire ConnectionA six foot cord with a 50 amp NEMA 15-50 three phase plug. Neutral is not used.
  • Wire Ga for Connection6 Ga
  • Branch FusingNo

Certifications and Markets

  • InternationalMade for USA market only
  • CENot CE certified
  • UL499Not listed to UL499
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-H-2026/41
13300 W
220-230 V
Single Phase
80 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for non-USA markets only
  • CENot CE certified
  • UL499Not listed to UL499
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

K-H-2026/42
13300 W
380-415 V
Three Phase (Wye)
30 Amp

Maximum Temperature

  • Max TemperatureCone 10, 2350F, 1290C

Additional Electrical Information

Certifications and Markets

  • InternationalMade for non-USA markets only
  • CENot CE certified
  • UL499Not listed to UL499
[sell_price]

Click on Red Arrow to expand specifications for each voltage. When printing the page expand the voltage specifications first.

No assembly required
Stainless steel wrapped around arched firebrick. There are seven adjustable clamps welded to the casing. Door and door frame are independent and are welded to the base assembly.
Heavy-duty door hinges to the left. Door opens all the way so that the door opening is completely unobstructed
Heavy gauge stand with two shelves. Fabricated from precision 14 gauge sheet metal. Levelling bolts and anchor holes included. Stand comes assembled in the US and Canada but can be disassembled for compact air shipment. Included floor mounting brackets (if not used with optional casters.)
A proprietary brick coating is applied to all interior surfaces of the kiln. This is put on before the element holders are inserted. This coating penetrates the firebrick and fuses the surface on a microscopic level which helps prevent dusting and crumbling of the fragile firebrick.
One solid ceramic peephole plug with full 1” diameter.
Limited Three Year Warranty
application/pdf icon200-000-75 efl2026 kiln assembly rev a1.pdf
DynaTrol Multi-Program Zone Control
Three control zones with three separate thermocouples. More about zone control.
8 Ga Type K Exposed Thermocouple in Mullite Protection Tube (4.5" long /114mm)
Mounted on control panel
The control panel is angled for easy viewing and operation of the DynaTrol. All controls and components are mounted in a separate control panel that is piggy-backed on top of the element connection box. A layer of insulation and this separation helps keep the controls cool for longer life. The control panel and element box are hinged for easy access and maintenance. Moreover, when the top control panel is in the open position it rigidly stays in a perpendicular position making servicing safer and easier than with other make kilns. Also the control box can be easily removed for servicing. On/off switch and control fuse are included. More about Easy-Fire control panel.
Control box drops down perpendicular to kiln for easy access to wiring and controls. All electrical wires are color coded or numbered.

Durability

Hard Ceramic Element Holders Make L&L Kilns More Durable
Durability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. No pins! The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
Quad Element Design
The Quad Element System provides a massively robust element for long life under production conditions. Standard on eQuad-Pro and JH Series. Optional on most other kiln series.
Thermocouple Protection Tubes
Mullite protection tubes extend thermocouple life and keep kiln clean. The mullite protection tube keeps the metal oxides of the thermocouple tip from dropping off and contaminating your work.
Molded Ceramic Industrial-Grade Element Connection Blocks
Industrial grade ceramic terminal blocks make changing elements easy.
Proprietary Reflective Coating Hardens & Seals Brick
Special brick coating hardens and seals brick for durability and cleaner operation.
Thick 8 Gauge Thermocouples
Thick 8 gauge thermocouples last a long time. Special Limit of Error to ANSI MC96.1 specifications is used.
Corrosion Resistant Case
Corrosion resistant materials and methods result in a long-lasting kiln.

Performance

Automatic Zone Control
Zone control gives you the utmost in controllable temperature uniformity. The DynaTrol separately measures temperatures in the bottom, middle and top of the kiln and automatically adjusts the heat output of three zones during the entire firing.
DynaTrol Multi-Program Zone Control
DynaTrol with 4 Easy-Fire programs (Slow Bisque, Fast Bisque, Slow Glaze, Fast Glaze), 6 custom programs, PreHeat, Delay, Program, Segment Review, and Diagnostics. Zone control included on most kilns.
Thermal Ceramics Firebrick
K23 firebrick combines good insulation with strength

Ease of Use

Angled Control Panel
Angled control panel makes viewing control and programming easier. (Easy-Fire only)
Solid Wide-View Peephole Plugs
Solid large non-tapered peepholes allow a wider view into the kiln.

Support

Superior Technical Support
The combined experience at L&L Kilns in kilns, ceramics, electrical engineering and process engineering is unsurpassed. We work as a team to help you get you answers and help.
Standard Three-Year Limited Warranty
Most L&L Kilns have a three-year limited warranty.

Serviceability

Easy to Remove & Service Control Panel (Easy-Fire, School-Master, eQuad-Pro)
Remove two screws and a few plug-on wires and the panel disconnects in 5 minutes.

Safety

Mercury Free Power Contactors
Power Relays are mercury-free to comply with increasing regulation and concern about mercury in schools
On-Off Switch and Panel Fuse
All L&L Kilns come with an on-off switch

Elements

APM Sintered Powder Metal Elements

APM elements increase element life in difficult applications

Thermocouples

Type S Platinum Thermocouples

Type S Platinum Thermocouples are recommended for high fire applications. NOTE: Price of upgrade is per each thermocouple. 

Pyrocil Metal Sheathed Industrial Thermocouples

Pyrocil thermocouples are sensitive but limited to about 2200°F but offer greater sensitivity to temperature change and so may be appropriate in applications below 2200°F that require sensitivity. NOTE: Price of upgrade is per each thermocouple. 

Vents

Optional Vent Doubler System

The Vent Doubler allows you to use one vent on two kilns.

Vent Control

The Vent Control allows you to automatically control the operation of the Vent-Sure kiln vent with one of the outputs from the DynaTrol (or Genesis). 

Vent-Sure Downdraft Kiln Vent System

The L&L Vent-Sure Kiln Vent is the most powerful downdraft kiln vent on the market today. That means you have more flexibility in the installation.

Kiln Furniture

Furniture Kits

Kiln furniture kits are the recommended set of ceramic shelves and posts that go with each kiln model. These are for loading the work in the kiln.

Controls

Genesis Touch Screen Control

The new Genesis control from Bartlett includes a touch screen interface and WIFI connectivity added to the proven software of the DynaTrol. 

Solid State Relays

Solid State Relays are quiet and result in longer element life.

Electronic High Limit Back Up Control

Electronic High Limit Back Up Control acts as an upper limit back up to the main control.

KISS Computer Interface & Datalogger for DynaTrol Control

Control, monitor and record data for up to 10 kilns from your computer for a one-time price.

Positive Door Interlock Switch (European Style)

All power is switched off with a 50 amp power switch before the door can physically be opened. (Easy-Fire & School-Master Kilns only).

Power

120 Volt Power Supply & Electrical Noise Filter For Automatic Kilns

This option helps protect your control from electrical noise

48" Wide x 78" High x 42" Deep
122 cm Wide x 200 cm High x 107 cm Deep
48" Wide x 78" High x 42" Deep
122 cm Wide x 200 cm High x 107 cm Deep
48" Wide x 78" High x 42" Deep
122 cm Wide x 200 cm High x 107 cm Deep
48" Wide x 78" High x 42" Deep
122 cm Wide x 200 cm High x 107 cm Deep
525 lbs (238 kg) + Kit 600 lbs (272 kg) + Vent 550 lbs (250 kg) + Kit + Vent 625 lbs (284 kg)
Skidded Carton with Foam-in-Place packaging