SHOP KILN PARTS

NO IMAGE
L-G-HE2C/P1
$35.00

Power Wire Harness - Set of wires is precut, fitted with the appropriate terminal ends, bundled, and labeled to run from the Power Connection Block to the Power Relays on all Easy-Fire Kilns with two sections at any voltage and 1 Phase Power. There are four wires per set.

L-G-HE3C/PR
$54.00

Power Wire Harness - Set of wires is precut, fitted with the appropriate terminal ends, bundled, and labeled to run from the Power Terminal Strip to the Power Relays on All Easy-Fire and School-Master Kilns with three sections at any voltage and phase power. There are six wires in a set.

NO IMAGE
L-G-HE2C/PR
$35.00

Power Wire Harness - Set of wires is precut, fitted with the appropriate terminal ends, bundled, and labeled to run from the Power Terminal Strip to the Power Relays on all Easy-Fire Kilns with two sections at any voltage and 1 Phase Power. There are four wires in a set.

L-G-PILO/00
$31.00

Red Pilot Light - Unit is used for All Manual Kiln Control Panels

M-A-FORK/SM
$1.40

Blue Insulated Small Fork Terminal - Unit is a Spade Fork, can accommodate up to 16-14 AWG. Fits on a #8 stud. It is used on Older 4-Way Switches. (REF: E-TRM-320862-A3)

M-A-RING/SM
$0.70

Blue Insulated Small Ring Terminal - Unit can accommodate up to 16-14 AWG, a #10 Stud. Used for 15 Amp & 20 Amp Power Cord Wire Leads and for Ground Wires. (REF:E-TRM-236160-A1)

L-G-SNUT/00
$0.95

#10-24 Stainless Steel Hex Nut - Unit is used for mounting the Vent Bypass Box and Contactor Plates and for the Element Terminal Bolts

L-G-TRTC/EF
$30.00

Thermocouple Terminal Strip - Unit has Six 3/16" Spade Terminals on each side, comes with a Terminal Strip Marker Board and is used for the Thermocouple Wires on piggybacked Control Panels

L-G-HETP/PR
$17.75

Power Element Lead Wire Top Harness - Set of wires is precut, fitted with the appropriate terminal ends, and labeled to run from the Top Element Terminal Block to the Power Terminal Strip on All Easy-Fire and School-Master Kilns. There are two wires per set. Note: This is wire #1 and #2.

L-G-WSRF/EQ
$180.00

This includes 18 high-temperature power wires inside the control panel of an eQ2327-3 or eQ2827-3. Power wires go from the terminal block to the fuse holders, then from the fuse holders to the relays, and then from the relays to the terminal strip where the element power wires attach. All terminals are included as an assembly. All wires are white.

L-G-WSRF/E6
$240.00

This includes 24 high-temperature power wires inside the control panel of an eQ2836-3. Power wires go from the terminal block to the fuse holders, from the fuse holders to the relays, and then from the relays to the terminal strip where the element power wires attach. All terminals are included as an assembly. All wires are white.

NO IMAGE
L-G-JMP6/10
$19.75

10 Gauge Jumper Wire - Unit is 8" Long and includes Insulation Sleaving and two Ring Terminals. This is used as a ground wire to ground the element connection box to the kiln case. The color is white.