Ring Mount for 12-Sided Kiln 2nd Generation Easy-Lift Hinges - Unit includes Mounting Hardware

These are the metal hinges that get attached to the kiln case and mate with the hinge parts that are welded to the element cover boxes. There are two hinge parts and four mounting screws.

Hardware Set for one Element Connection on an Element Terminal Block for the Ceramic Terminals.

Set includes:

1. One #10-24 x 1-1/4" Long Stainless Steel Bolt
2. Two #10-24 Stainless Steel Nuts
3. Four #10 Fender Washers

Note: You may not need all the fender washers depending on your situation.

NOTE: This part set is available for 50% discount when ordered with elements.

See this link for wiring help

Hardware Set for one Element Connection on a fabricated electrically insulating board (See this example)

Set includes:

1. One #10-24 x 1-1/4" Long Stainless Steel Bolt
2. Two #10 Star Lock Washers
3. Three #10-24 Stainless Steel Nuts
4. Four #10 Stainless Steel Fender Washers

Note: You may not need all the fender washers.

NOTE: This part set is available for 50% discount when ordered with elements.

Element Cover Box for 4-section eQ2836-3 kilns - The unit has a corrosion-resistant powder-coated finish and comes with mounting hardware, bushings, information stickers, terminal boards for thermocouples, and power wires.

Element Cover Box for 3-section eQ2327-3 and eQ2827-3 kilns - The unit has a corrosion-resistant powder-coated finish and comes with mounting hardware, bushings, information stickers, terminal boards for thermocouples, and power wires.

Stainless Steel Band for Fuego Kiln Sections (Rings) - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band

Hardware for Attaching Stand Legs with PEM Nuts - Includes eight 1/4" Long #20 (1/4-20) Bolts.

Hex Head #10 2-1/2 Self-Tapping Screw for mounting EL Terminal Blocks, Stainless 400 Series

Cotter Pins for All Hinge Bars - Unit includes a set of two Pins

Hinge Bar for Standard Non-Spring Hinge - Unit is 3/8" in Diameter, 10" in Length, Chrome Plated, and includes two Cotter Pins

Knob for the INF Infinite Zone Switch

Element Cover Box for All Jupiter Automatic and Jupiter Manual Kilns - Unit includes Mounting Hardware (4 sheet metal screws)

Element Cover Box for All Jupiter Powered Bottoms - Unit includes Mounting Hardware

Stainless Steel Band for Liberty-Belle LB18 & LB18-3 Kiln Sections (Rings) - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All LB18 & LB18-3 Kilns

Control Box for Liberty-Belle Kilns - Unit has a corrosion resistant powder coated finish, comes with Mounting Hardware, and is used with All Liberty-Belle Kilns

Insulation Blanket for Liberty-Belle Kilns - Unit fits into the back of the Insulation Plate and is used with All Liberty-Belle Kilns

Insulation Plate for Liberty-Belle Kilns - Unit is aluminized steel, comes with Mounting Hardware, and is used with All Liberty-Belle Kilns. Includes terminal strip mounted as shown on photograph.

DaVinci Lid Channel Set for T2300. Includes the powder-coated channels that go around the lid slab, handles, and all mounting hardware.

DaVinci Lid Channel Set for T3400. Includes the powder-coated channels that go around the lid slab, handles, and all mounting hardware.

DaVinci Lid Channel Set for X2300. Includes the powder-coated channels that go around the lid slab, handles, and all mounting hardware.

DaVinci Lid Channel Set for X2800. Includes the powder-coated channels that go around the lid slab, handles, and all mounting hardware.

DaVinci Lid Channel Set for X3200. Includes the powder-coated channels that go around the lid slab, handles, and all mounting hardware.

#8 Lid Safety Chain - Unit is precut to 28" Long, comes with Mounting Hardware, and is used to secure the Kiln Lid to the Top Ring

#8 Lid Safety Chain - Unit is precut to 16" Long, comes with Mounting Hardware, and is used to secure the Kiln Lid to the Top Ring

Mounting Kit for Long Type K Thermocouples - Kit includes two #8 3" Screws, six 1/2" high Ceramic Spacers, and is used for all Pyrocil Type K and all Long 8 Gauge Type K (Exposed) Thermocouples

#6 Nut and Lock Washer - Set is used to mount the Control Transformer, Power Relay, and Power Terminal Block to the Control Box or Contactor Plate. (Note screw is shown only for illustration)

Mounting Kit for Old Style (Red) Element Terminal Boards - Kit includes four 1/4" high ceramic spacers and two #8 x 1-1/2" long stainless sheet metal screws.

L&L's rolling kiln stand features heavy gauge (14 ga) galvannealed steel construction with multiple bends for extra strength, swivel locking casters, integrated vent collection box support, and guide rails for the kiln. Each size is fitted to the kiln.

L&L's rolling kiln stand features heavy gauge (14 ga) galvannealed steel construction with multiple bends for extra strength, swivel locking casters, integrated vent collection box support, and guide rails for the kiln. Each size is fitted to the kiln. 

L&L's rolling kiln stand features heavy gauge (14 ga) galvannealed steel construction with multiple bends for extra strength, swivel locking casters, and guides for the kiln. Each size is fitted to the kiln. 

L&L's rolling kiln stand features heavy gauge (14 ga) galvannealed construction with multiple bends for extra strength, swivel locking casters, integrated vent collection box support, and guide rails for the kiln. Each size is fitted to the kiln. 

#8 Safety Chain - Unit is sold by the foot

Complete Safety Chain Assembly - Assembly includes the Safety Chain, Snap Clip, Screw Hook, and any Hardware

Snap Clip for the Safety Chain System - Unit should be attached to the end of the Safety Chain to hook onto the Screw Hook

Control Top Box for School-Master Kilns - Unit has a corrosion resistant powder coated finish, comes with Mounting Hardware, and is used with All School-Master Kilns

#10 x 1/2" Long Stainless Steel Sheet Metal Screw - Unit has a Phillips Pan Head and is used to attach Hinge Components to the kiln body and to attach Handles to the kiln body

#6 x 1/2" Long Stainless Steel Sheet Metal Screw - Unit has a Phillips Pan Head and is used to attach the Control Board to the Control Panel

#8 x 3" Long Stainless Steel Sheet Metal Screw - Unit has a Phillips Pan Head and is used to attach Kiln Sitter/Timers and longer Type K Thermocouples (Pyrocil & 8 Gauge Exposed) to the kiln body

#6 x 1-1/2" Long Stainless Steel Sheet Metal Screw - Unit has a Phillips Pan Head and is used to mount standard length Type K Thermocouples to the kiln body

#8 x 2-1/2" Long Stainless Steel Sheet Metal Screw - Unit has a Phillips Pan Head and is used to attach Kiln Sitter/Timers and longer Type K Thermocouples (Pyrocil & 8 Gauge Exposed) to the kiln body

#6 x 1/2" Long Stainless Steel Sheet Metal Screw with a self-drilling TEK point - Unit has a Phillips Pan Head and is used to keep the Control Box Door closed on Jupiter kilns

#8 x 1-1/2" Long Stainless Steel Sheet Metal Screw - Unit has a Phillips Pan Head and is used to attach Element Terminal Blocks to the kiln body

#8 x 1/2" Long Zinc Plated Sheet Metal Screw - Unit has a Phillips Pan Head and is used to secure the Top Box to the Element Cover Box on kilns with Piggybacked Control Panels.

#8 x 3/4" Long Zinc Plated Sheet Metal Screw - Unit has a Phillips Pan Head and is used to attach the Element Cover Box or Control Box to the kiln body, the Power Terminal Block to the Contactor Plate, the Power Terminal Strip and Thermocouple Terminal Strip to the Element Cover Box, and the Safety Chains to the kiln Lid and top Ring

#8 x 3/8" Long Zinc Plated Sheet Metal Screw - Unit has a Phillips Pan Head and is used to attach the Power Relays and Control Transformer to the Contactor Plate

#6-32 x 1/4" Slotted Binding Head Screw. Used on hinge for Corona Kiln.

Stainless Steel Band for Easy-Fire 10-Sided Kiln Sections (Rings) with 2-1/2" or 3" Brick - Unit includes Hose Clamps spot welded to and all appropriate holes punched in the Stainless Band and is used with All e23S, e23S-3, e23T, & e23T-3 Kilns